BRAUN JB 901AI PowerBlend 9 Owner’s Manual

BRAUN JB 901AI PowerBlend 9

Safety Instructions Before use

Please read the user instructions carefully and completely before using the appliance and retain for future reference. Remove all packaging and labels and dispose them appropriately.

Caution

• The blades are very sharp! To
  avoid injuries, please handle blades with utmost care.

• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

• Children shall not play with the appliance.

• This appliance shall not be used by children.

• Children shall be kept away from the appliance and its main cord.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Always switch off and unplug the appliance when it is left unattended and before assembling, disassembling, cleaning and storing.

• Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming.

• Never immerse the unit in water or other liquids.

• Caution: Ensure the complete lid is placed on the jug before starting into operation.

• Before plugging into a socket, check whether your voltage corresponds with the voltage printed on the bottom of the appliance.

• This appliance is designed for household use only and for processing normal household quantities.

• Do not use the appliance for any purpose other than the intended use described in the user manual. Any misuse may cause potential injury.

• Do not use any part in the microwave.

• Please clean all parts before first use or as required, following the instructions in the Care and Cleaning section.

• Always operate the blender with the lid or the guard in position as indicated in the instructions.

• Never put your hand in jar when it is placed on the base unit. If food needs to be pushed down use suitable tool e.g. spatula.

• Important: Keep all packaging (plastic bags, polystyrene foam) away from children.

• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

• Do not use the device without any load in the jug.

• Do not store food or liquids in the jug.

• Avoid bumping or dropping the blender when in operation or at any time.

• To avoid damage, do not fill the containers past the “max” marking or scale.

Description

1. Measuring cap

2. Jug

3. Precision Edge blade

4. Centering pad

5. Texture Control dial + START/STOP button

6. On/Off switch

7. Timer

8. Illuminated touch display

9. Motor base

10. Cord storage (on back side)

11. Lid incl. gasket

12. Tamper
    
    Smoothie2Go blending set consisting of: 13. 2 x 600 ml Smoothie2Go bottles incl. drinking lids

13. Smoothie2Go blade group incl. gasket

14. Smoothie2Go adapter
    

Before First Use

Clean all parts before using the blender for the first time – refer to „Care and Cleaning“.

Using the Jug

When switched on (6) and any container (2/13) is assembled, MANUAL lights up and the START/STOP button (5) is flashing, indicating the appliance is ready to use. By removing the measuring cap (1), you can add additional ingredients or liquids at low speed (Fig. A).
Caution:

• Never attempt to operate the appliance without the centering pad (4)
• Be careful when blending hot liquids in the jug using the manual mode. Start blending on speed 1 to avoid possible burns due to escaping steam and splashes. The maximum  allowed amount of hot liquid ingredients inthe jug is 1500 ml.
• The coupling seat may be hot after running – do not touch.
  

Automatic Food Programs & Texture Modes

First, select one of the 6 automatic food programs (8) and then select your desired texture (5) to deliver your preferred consistency. Once you press START (5), the timer (7) shows the total blending time and counts down (Fig. B). The program stops automatically when the countdown ends. To stop the program in advance, press any button.
For detailed processing instructions refer to table I.

Pause
To pause the program press START/STOP (5). The timer (7) and the dial (5) start flashing indicating the pause mode. To continue the program press START/STOP again.

„Hot Soup“ Function
When using the program „soup“ + texture „smooth“ the blades in the jug reach speeds fast enough to bring cold ingredients to steaming hot in about 6 minutes.
Caution: Do not insert hot ingredients (warmer than 25 °C) when using this function. When preparing soups with hot pre-cooked ingredients use medium/coarse texture.

Manual Mode

To start or stop blending, press the START/STOP (5) button. The timer (7) counts up (Fig. C). For detailed processing instructions refer to table I.

Pulse Mode

The pulse mode can be used to break apart larger pieces of food or to control the texture of food when chopping. Pulse at desired speed. Duration depends on how long you press the START/STOP button (Fig. D).

Using the Double Function Measuring Cap

During operation use the measuring cap (1) to slowly add oil through the dripping hole to emulsify sauces and dressings (Fig. E.a) or easily add small amounts of liquids (Fig. E.b).

Using the Tamper

It helps to push unmixed ingredients down from the jug wall and to bring thick mixtures into the blades while blending. The supplied tamper (12) will not touch the blade when used through the opening of the measuring cap (1) (Fig. F).
Note: It must be used only when the main part of the lid is in place.

Blending with the Smoothie2Go Bottle

Note: When using the Smoothie2Go bottle the programs smoothie and ice crush are available for use. The Smoothie2Go bottle must not be used to blend hot foods or carbonated liquids. To avoid damage, do not fill the container past the “max” marking. When preparing protein shakes or drinks with alcohol, do not fill beyond max. 400 ml.
For detailed processing instructions refer to table II.

Auto Off
The appliance assembled with the jug (2) stops blending automatically after 6 minutes processing time in manual mode and assembled with the Smoothie2Go bottle (13) after 2 minutes. To re-start operation, press START/STOP (5).

Stand-By
If no speed or mode is selected the appliance enters into stand-by mode automatically after 2 minutes and all indicator lights are switched off, only the timer (7) is dimmed and shows „–:–. To re-activate the blender press any button or move the dial (5).

Thermal Motor Protection
The blender is equipped with a thermal protector which protects the motor from overheating. If the motor shuts down during operation, unplug the blender and let it cool down for a minimum of 30 minutes before continuing blending.

For Best Results

• If blending action stops during blending there may be not enough liquid to blend efficiently. Add some more liquid or insert the tamper and stir slowly.
• For preparing small amounts of food use a low speed level.
• When chopping nuts, cheese and meat we recommend running the selected program/ texture twice to achieve desired results.
• When chopping vegetables, we recommend adding a small amount of water to improve the circulation. After finishing, strain your chopped ingredients.
• Fill the jug in the following order: Liquids, dry goods, leafy greens, soft ingredients, hard or frozen ingredients, ice cubes. Fill the ingredients in the reverse order into the Smoothie2Go bottle.
• If blending in manual mode, always start on speed 1 and slowly increase to the desired speed.
• When chopping solid ingredients (such as parmesan, chocolate or meat) cut them up into small pieces (3 cm).

Care and Cleaning

We recommend cleaning the jug by using the CLEAN program to prolong its lifetime. The program will automatically stop once it completes the cycle. Fill the jug (2) halfway with water, add a few drops of dishwashing soap and follow the steps as described (Fig. H).
The same procedure applies for the Smoothie2Go bottle (13).
For best results, run the CLEAN program immediately after use. Make sure to thoroughly rinse and air-dry the jug after completion of the program.

Deep Cleaning
We recommend to perform a deep cleaning of the jug on a monthly basis using a vinegar solution to remove food residues and stains.
Prepare the vinegar solution in the jug : dilute 500 ml of vinegar (5% acid) in 500 ml of water (1:1 ratio) and start the CLEAN program. Allow the mixture to stand in the jug for maximum 5 minutes. Rinse the jug well after each deep cleaning and allow it to air dry.

Data Table

Warranty and Service

For detailed information see separate warranty and service leaflet or visit www.braunhousehold.com.

 Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

Materials and accessories coming into contact with food conform to EEC regulation 1935/2004.

Troubleshooting Guide

your home. If none of the above works, contact Braun Customer Service
Jug or Smoothie2Go attachment is not attached properly.
Timer shows three dashes
(- – -)| Check the correct position of the attachment
Liquid is splashing out of the jug| Gasket is not mounted properly, loose, or even torn| Ensure that gasket is mounted properly
Jug lid or measuring cap are not closed properly| Close the lid and measuring cap
Jug is overfilled| Follow the maximum quantity recommendation in the processing table
Motor base is moving on the countertop| Rubber feet are not clean| Clean the rubber feet to ensure a good grip
Error code is shown on the Timer Display
(E01,E02,E03,E04,E05)| E01
Overload protection| Turn the blender off, remove the container from the motor unit and check if the blade is blocked.
Follow the recommended speed, max. filling capacity or mode in the processing
table.
E02/E03
The thermal protection is activated to protect the drive unit from overheating| Turn the blender off, unplug and wait at least 30 minutes before resuming operation. If the error code does not disappear contact Braun Customer Service
E04/E05| Turn the blender off and on again. If the error code does not disappear contact Braun Customer Service

For UK Only

Guarantee Information
All Braun Household products carry a minimum guarantee period of two years. The rights and benefits under this guarantee are additional to your statutory rights which are not affected. Please keep your receipt as this will form the basis of your guarantee. In the unlikely event of a breakdown you have access to professional help from our team simply by calling: 0345 222 0458
For service in the Republic of Ireland please call: 012475471

Braun Household undertakes within the specified period to repair or replace any part of the appliance, free of charge (with the exception of any glass or porcelain-ware incorporated in the product) found to be defective provided that;

• We are promptly informed of the defect.
• The product is used and maintained in accordance with the User Instructions.
• The appliance has not been altered in any way or subjected to misuse or repair by a person other than an authorized service agent for Braun Household.
• No rights are given under this guarantee to a person acquiring the appliance second hand or for commercial or communal use.
• Any repaired or replaced appliance will be guaranteed on these terms for the unexpired portion of the guarantee.
• The need for repair has not been caused by insufficient aftercare or cleaning: or damage caused by the chemical or electrochemical effects of water.

Under no circumstances shall the application of this guarantee give rise to the complete replacement of the appliance or entitle the consumer to damages.
Braun Household, New Lane, Havant, Hampshire PO9 2NH
www.braunhousehold.co.uk
Thank You for choosing Braun. We are confident that you will get excellent service from this product.
TO IMPROVE YOUR EXPERIENCE
Register now at www.braunhousehold.co.uk By registering we may send you from time to time details on exclusive offers, promotions, recipes and inside tips.

www.braunhousehold.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>