NVA BMU 1KVA Balanced Mains Unit Instruction Manual
- June 3, 2024
- NVA
Table of Contents
BMU 1KVA Balanced Mains Unit
Instruction Manual
BALANCED MAINS UNIT (BMU) – ADDITIONAL INSTRUCTIONS
The NVA BMU is designed for use with audio equipment only. The BMU can feed a
complete system, subject to power requirements, by running an extension block
from one of the BMU sockets – please check power consumption compatibility of
non NVA equipment, with us, before use.
The BMU is very heavy, so we recommend it is placed on the bottom shelf of a
solid equipment rack or stand. The unit must not be covered or enclosed, in
any way, when in use.
Setting up – the BMU should be powered on without any equipment plugged into
it’s 4 sockets (at first, the BMU may trip the fuse in consumer unit, once or
twice – after that it will be OK). Also, any time that the BMU is switched off
or on, all equipment must be unplugged from the BMU sockets first, otherwise
the BMU may trip the fuse in the consumer unit.
If you are in any doubt, please contact us before setting up your
BMU: mail@hfsaudio.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>