DaVinci M1921 Piedmont 4-In-1 Convertible Crib Instruction Manual

June 3, 2024
DaVinci

DaVinci M1921 Piedmont 4-In-1 Convertible Crib

DaVinci M1921 Piedmont 4-In-1 Convertible Crib

M1921 Piedmont 4-In-1 Convertible Crib

Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.davincibaby.com/support.
For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Our pieces are made from natural woods. Due to the nature of wood, some variation in color, grain, or texture is to be expected.
We hope you and your growing family enjoy our product.

With thanks,
DaVinci

  • You will need two people to assemble this crib.
    Two Persons Symbol

  • Tools Needed (not included)
    Screw Driver
    Phillips screwdriver

PARTS

  • A. Front / Back Top Rail (2)
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • B. Front Panel
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • C. Back Panel
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • D-1. Left Side Top Rail
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • D-2. Right Side Top Rail
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • E-3. Left Side Panel
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • E-4. Right Side Panel
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • G-1. Front Left Leg
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • G-2. Front Right Leg
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • H-1. Rear Left Leg
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • H-2. Rear Right Leg
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • J-1. Drawer Front
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • J-2. Drawer Back
    M1921 Piedmont 4-In-1 Convertible Crib Part

  • J-3. Bottom Board (2)

  • J-4. Drawer

  • J-7. Left Drawer Panel

  • J-8. Right Drawer Panel

  • M. Mattress Support III
    M1921 Piedmont 4-In-1 Convertible Crib Part

HARDWARE

  • H1. 3” Allen Head Bolt (14)
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib
Hardware

  • H3. 1-3/4” Allen Head Bolt (10)
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib
Hardware

  • H5. 3/4” Allen Head Bolt (Serrated) (4)

  • H6. 1-1/8” Wood Screw (12)
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib
Hardware

  • H8. Wood Dowel (8)

  • H10. Lock washer (24)

  • H11. Allen Wrench
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib
Hardware

  • H12. 3/4″ Bolt with metal cap (2)
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib
Hardware

ASSEMBLY INSTRUCTIONS

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

Do not overtighten the bolts.

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations
DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations
DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations
DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

**6**

  • Make sure the mattress support III (M) is installed properly.
    THE FLAT SIDE UP.
  • Make sure the smattress support III (M) is level.
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations
    DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

Do not overtighten the bolts.

DRAWER ASSEMBLY INSTRUCTIONS

Drawer Assembly Instructions illustration
Drawer Assembly Instructions illustration
Drawer Assembly Instructions illustration
Drawer Assembly Instructions illustration

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten.
Before using your crib, please read all cautionary statements on the insert sheet.

CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).


Please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase, the date of purchase and the wood finish in the box to the lower right.

WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL FOR FUTURE REFERENCE

Please read the Caution and Warning Statements insert before using your crib.


ATTENTION : TOUT MATELAS UTILISÉ DANS CE LIT DOIT MESURER AU MOINS 69 CM (27 1/4 POUCES) PAR 131 CM (51 5/8 POUCES) ET AVOIR UNE ÉPAISSEUR NE DÉPASSANT PAS 15 CM (6 POUCES).


| WARNING:
Failure to follow these warnings and the assembly instructions could result in serious injury or death.
---|---

READ ALL INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP THE MANUAL FOR FUTURE USE.

WARNING:
Parents should ensure a safe environment for the child by checking regularly, before placing the child in the product, that every component is properly and securely in place.

  • DO NOT use this crib if you cannot exactly follow the accompanying instructions.
  • Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
  • To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
  • Strangulation Hazard: Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT place cords, straps, or similar items that could become wound around the child’s neck in or near this crib. DO NOT suspend strings over a crib or attach strings to toys.
  • To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
  • DO NOT place a crib near a window where cords from blinds or drapes may strangle a child. DO NOT place this crib near a window or a patio door where a child could reach the cord of a blind or curtain and be strangled.
  • Fall Hazard: When a child is able to pull to a standing position, set the mattress to the lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.
  • DO NOT use this crib if the child is able to climb out unaided or is taller than 35 in. (89cm).
  • Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. DO NOT substitute parts. Contact DAVINCI for replacement parts and instructional literature if needed.
  • DO NOT use a water mattress with this crib.
  • For cribs equipped with teething rails, replace teething rail if damaged, cracked or loose.
  • If refinishing, use a non-toxic finish specified for children’s products.
  • Never use plastic shipping bags or other plastic films as mattress covers because they can cause suffocation.
  •  Infants can suffocate in gaps between crib sides when used with a mattress that is too small.
  • Follow warnings on all products in a crib.
  • Ensure that the sides are properly latched or locked in place when the crib is occupied.
  • The mattress used with this crib should not be more than 15cm thick and should be of such length with width that the gap between the mattress and the sides of the crib is no more than 3cm when the mattress is pushed into the corner of the crib.

| WARNING:
Please do NOT remove any wood screws in the normal disassembly of the crib.
---|---

ONE YEAR LIMITED WARRANTY

We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.

This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negligence, improper use or alteration to the finish, design, and hardware of the crib. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some states do not allow limitation on how long an implied warranty lasts.


Storage

  • Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents.
  • Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish.
    Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately

Care and Cleaning

  • Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a damp, soft rag. Rinse and dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products. If you choose to refinish this furniture, the warranty will be voided.

Toddler Bed Conversion Kit (3099 – Sold Separately)

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

Toddler Bed Conversion Kit (M3099) is not included and sold separately.
Please contact your retailer or purchase onwww.davincibaby.com

* Keep the footboard for full size bed conversion.

ASSEMBLY INSTRUCTIONS

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations
DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

DO NOT OVERTIGHTEN.

**Finish**

TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS AT LEAST 51 5⁄8 IN. (131 CM) IN LENGTH, 27 1⁄4 IN. (69 CM) IN WIDTH, AND A MAX THICKNESS OF 6 IN. (15 CM).


WARNING : STRANGULATION HAZARD
Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation.

Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. NEVER place bed near windows where cords from blinds or drapes may strangle a child. NEVER suspend strings over bed. NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords, around a child’s neck. These items may catch on bed parts.


Full Size Conversion Kit (5789 – Sold Separately)

DaVinci M1921 Piedmont 4-In-1 Convertible Crib Assembly Instructions
illustrations

This crib is convertible to a full size bed. M5789 Full Size Conversion Rail is recommended, please contact your retailer or purchase onwww.davincibaby.com

Registering your product is even easier than before.
You can register your product on our website at :
www.davincibaby.com/registrations
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.DAVINCIBABY.COM/PARTS
OR YOU CAN CONTACT US BY MAIL:
DAVINCI
8700 REX RD., PICO RIVERA, CA 90660
323-768-0183
www.davincibaby.com

DaVinci Logo

Documents / Resources

| DaVinci M1921 Piedmont 4-In-1 Convertible Crib [pdf] Instruction Manual
M1921, Piedmont 4-In-1 Convertible Crib, M1921 Piedmont 4-In-1 Convertible Crib
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals