FABER FTF REVO 9012BU 12 Inch Table Fan Instruction Manual

12” TABLE FAN
FTF REVO 9012BU
Instruction Manual  

FTF REVO 9012BU 12 Inch Table Fan

BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.

BEFORE FIRST USE

Read and follow all the instructions in this “Use And Care” manual even if you feel you are familiar with the products, and find a place to keep it handy for future reference. Your attention is drawn particularly to the sections concerning “IMPORTANT SAFEGUARDS”.

IMPORTANT SAFEGUARDS

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT. When using the electrical appliance, the following basic safety precautions should always be followed.
WARNING- to reduce the risk of fire. electric shock or injury to persons or property;

• Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate.
• Do not use this fan with any solid state speed control device to reduce the risk of electric slouch.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory, mental capabilities or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible by their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the fan running unattended.
• Do not operate the product if it is dropped, damag or showing signs of product malfunction. Do not operate the product with a damaged plug or cord. Return the complete product to the place of purchase for inspection, refund or replacement.
• If it is not working properly, contact a qualified electrician or service centre for examination and repair, never try to dismantle it by yourself.
• Do not immerse or expose the product or flexible cord to rain, moisture or any other liquid.
• This product should not be used in the immediate vicinity of water, such as bathtubs, washbowls, swimming pools etc. where the likelihood of immersion or splashing could occur.
• Never install the unit where it could be subject to:
  • Heat sources such as radiators, heat registers, stoves or other products that produce heat
  • Direct sunlight
  • Mechanical vibration or shock
  • Excessive dust
  • Lack of ventilation, such as a cabinet or bookcase
  • Uneven surface
• Switch off and unplug from outlet when the product is not in use, before assembling or disassem-bling parts and before cleaning. Fully assemble the fan before switching on.
• Avoid contact with moving parts. Do not insert any body parts (e.g. finger) or objects through the grill when the fan is operating.
• Do not cover the grille, or operate in close proximity to curtains, etc.
• This product is intended for normal domestic/household use only.
• Always disconnect the fan when moving it from one location to another.
• The use of attachments or accessodes not recommended or sold by the product distributor may cause personal or property hazards or injuries.
• Be sure fan is on a stable surface when operating to avoid overturning.
• Do not immerse in water.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent, or similar-ly qualified person, in order to avoid a hazard.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

FEATURES OF THIS PRODUCT

PRODUCT ASSEMBLY

ASSEMBLE OF BASE

• Insert the motor assembly into the base plate.
• Screw the base plate to the body part.
• Ensure the screw s fix well.

ASSEMBLE OF BLADE AND GRILLE

• Unscrew the plastic mounting nut from the front of the motor housing by rotating it anticlockwise.
• Position the rear grille against the front of the motor housing with the handle uppermost, ensuing that the locating pegs on the motor housing are engaged correctly in the holes of the rear grille.
• Tighten the Rear Grille Mounting Nut clockwise. DO NOT OVERTIGHTEN IT.
• Push the fan blade onto the motor shaft, locating the slot at the back of the blade on the drive pin that passes through the motor shaft.
• Tighten the blade cap by turning it anticlockwise.
• Position the front grille against the rear grille so that the holes in the rims that accept the small nut and bolt are in line. Insert the bolt through the holes and screw on the nut. Do not fully tighten at the stage.
• Push the grille retaining clips into position ensuring that they engage correctly on the rim of the grille.
• Fully tighten the small nut and bolt that passes through the rim of the grille.

OPERATION OF THE PRODUCT

Control Panel, SPEED SETTING
Switch Knob 0-1-2-3-1.

1. Speed setting by rotating knob with “1” — “2” — “3”.
2. To switch the fan off, rotating knob with “0”.
3. For oscillation, press the oscillation knob which located in the motor housing, the fan starts oscillat-ing. To stop oscillation, pull up the oscillation knob.
4. Always unplug the appliance when it is not used.

CLEANING

• Switch off and unplug from the power supply before assembling or disassembling and cleaning.
• Keep the air vents at the rear of the main body free from dust or fluff- use a vacuum cleaner to remove these when necessary. Do not probe any opening to remove fluff.
• Fan component parts should be cleaned using mild soap and a damp cloth or sponge. Do not allow any water or other liquid to enter the motor housing.
• Thoroughly remove soap film with clean water.
•   CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the fan components.

www.faberappliances.com.my| facebook.com/FaberAppliances
---|---
|

Dibuat untuk dan diedarkan oleh:
FIMACO SDN. BHD.
8-2, Wisma Fiamma, No. 20, Jalan 7A/62A,
Bandar Manjalara, 52200 Kuala Lumpur, Malaysia.
Tel: +603-6279 8888 (General Line)
Fax: +603-6279 8665 (Marketing Dept)
Email:enquiry@faberappliances.com.my
http://www.faberappliances.com.my

Documents / Resources

| FABER FTF REVO 9012BU 12 Inch Table Fan [pdf] Instruction Manual
FTF REVO 9012BU 12 Inch Table Fan, FTF REVO 9012BU, 12 Inch Table Fan, Table Fan, Fan
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>