QIYUE Mini Smartphone User Manual
- June 3, 2024
- QIYUE
Table of Contents
Mini Smartphone
User Manual
Mini Smartphone
1. Q: How to insert SIM and memory cards?****
– A: Double cards slot design, supports for 2 nano SIM cards or 1 nano SIM card and 1 memory card at the same time (as shownin the picture), and the memory card supports maximum 64GB; SIM card and memory card can be identified normally no matter it is inserted before or after switching on the device.
2. Q: How to switch on or off?****
– A: Press and hold the power button for 3 seconds to switch on the device;Press and hold the power button for 2-3 seconds to pop up the box with selections of “shut down” and “restart”. Click “shut down” to switch off the device.
3. Q: Do both SIM cards support for 3G network?****
– A: By default, the SIM slot 1 is 3G network while SIM slot 2 is 2G; However when only one SIM card is inserted in the device, even in the SIM slot 2, it will switch to 3G network.
4. Q: In which countries can this phone be used?****
– A: The first mini smart phone of global version, supports universal GSM and
WCDMA networks.
– WCDMA: 850MHz(B5)/900MHz(B8)/1700MHz(B4)/1900MHz(B2)/2100MHz(B1)
– GSM: 850MHz(B5)/ 900MHz(B8)/1800MHz(B3)/1900MHz(B2)
5. Q: How to modify IMEI?****
– A: Due to the restrictions of local communication policies, in some countries (India, Indonesia, Turkey, Azerbaijan, Colombia, etc.) the IMEI may have to be modified before using the mobile phone; Input # # 7101 # # to modify the IMEI, then save the IMEI, and restart the device. After that, the new IMEI can be used normally.
6. Q: What’s the RAM and ROM?****
– A: RAM is 2GB and ROM is 32GB. Since Android system and pre-installed apps will occupy some memory, it is normal to find that ROM is less than 32 GB.
7. Q: How to screenshot?****
– A: When device is on, press and hold the power button and volume – at the same time for 2 seconds.
8. Q: How to update the system?****
– A: The device comes with Android version 8.1, However it does not support to
upgrade to a higher Android version.
– But there will be new versions based on Android 8.1, and the user can
upgrade to the latest versions online.
9. Q: How to do if the system crashes?****
– A: Use a pin to push the reset hole, turn on the device to solve the system crash problem
10. Q: How to do if the device does not charge up?****
– A: Clean the connecting areas of the charging port. It is suggested to use
the original charging cable or a charging cable with a long head, because the
charging port is deep.
– B: Press the power button and volume – at the same time, press and hold for
more than 10 seconds, and then plug in the charging cable.
– C: Poke the reset hole with the card needle, and then plug in the charging
cable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications Commission (FCC) standards
that limit human exposure to radio frequency (RF) energy emitted by radio and
telecommunications equipment. These standards prevent the sale of mobile
devices that exceed a maximum exposure level (known as the Specific Absorption
Rate, or SAR) of 1.6W/kg. SAR information on this and other model devices can
be accessed online on the FCC’s website through
transition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be much lower, as the device has
been designed to emit only the RF energy necessary to transmit a signal to the
nearest base station. SAR test distance, Head:0mm, Body-Worn:10mm
By automatically emitting lower levels when possible, your device reduces your
overall exposure to RF energy.
The FCC has granted an Equipment Authorization for this model device based on
the compliance of all reported SAR levels with the FCC RF exposure guidelines.
This device has a FCC ID number : 2A9AU-A29 [Model Number : i14 and the
specific SAR levels for this device can be found at the following FCC website
: www.fcc.gov/oet/ea/.