ALPINE MZP563 Corporation 46-in L Wood Park Bench Instruction Manual
- June 3, 2024
- Alpine
Table of Contents
ALPINE MZP563 Corporation 46-in L Wood Park Bench
Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been removed from the packaging.
Components
Assembly
Fit the two bolts on the bottom on the Seat (A) into the tabs at the center
bar of the Left Side Panel (B). Insert the two bolts on the left side of the
seat with the two upper tabs at the back of the side panel and middle tab on
the front Left Side Panel (B). Place Cap Nuts (E) on two bolts and tighten
securely with the Wrench (F).
Repeat the process with the Right Side Panel (C) on the right end of the Seat
(A). Align the bolts on the back corners of the Backrest (D) with the two tabs
at the tops of the Left Side Panel (B) and Right Side Panel (C). Place a Cap
Nut (D) on each bolt and tighten securely with the Wrench (E).
Congratulations. Your bench is now completely assembled. Place it in a relaxing setting and enjoy!
Troubleshooting
If you have any questions or problems, please contact the retail store where
you purchased this Daisy Bench.
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided. Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please read below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures.
Improper storage that allows water to freeze within a product may cause damage
and is considered negligence and will, therefore not be covered under this
warranty. The use of “hard water” and/or caustic cleaners can affect the paint
or other finishes. Failure to keep the unit clean, and use of such
additives/cleaners, will also void the warranty. Please note: for fountains,
it is normal for some splashing to occur and protecting the immediate surfaces
is not the responsibility of Alpine
Corporation
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be
touched up using standard paint. The paint is designed to protect the entire
finish against breakdown of color. As with any product, all finishes with time
will gradually fade and discolor. The warranty will only cover against severe
or complete fading within the first year from date of purchase with the above
exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom
you purchased the product. If that is not an option, you can contact Alpine
Corporation at www.alpine4u.com. When contacting
Alpine Corporation, you must be prepared to show proof of purchase, provide
photographs and any other information needed to validate your claim. This may
be necessary to distinguish between a partial or complete replacement of a
defective product. The warranty does not cover any items with multiple parts;
the warranty will ONLY cover the individual component of the unit/item that
may be defective. Replacement parts can be made available to a consumer
through the original selling party, or an approved parts retailer. If this is
not an option, contact our customer service department. Item is covered under
one year limited warranty from the date of purchase. If your purchase was
after our 30-day grace period, payment information will be requested for
shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
- Inadequate care and/or neglect
- Environmental and/or natural elements
- Immersion in water, unless specified
- Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation and/or modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also does not cover any additional charges or installation, removal, disposal and/or shipping costs or consequential damage associated with any warranty claim.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>