nacon 1231 MG-X PRO MFi Gaming Holder User Manual

: June 3, 2024
: nacon

nacon 1231 MG-X PRO MFi Gaming Holder

nacon-1231-MG-X-PRO-MFi-Gaming-
Holder-product

Thank you for purchasing this NACON® product.

This product has been designed to enhance your gaming experience. Please keep this user manual in a safe place for future reference.

Warranty

To access the declaration of conformity, please go to:
https://my.nacongaming.com/fr/my-nacon/support/

Product Features

Nacon MG-X PRO Controller for iPhone® Asymmetrical joysticks Built-in battery, rechargeable via USB-C
20 hours of battery life Compatible with iOS14 and above Bluetooth® connection to your iPhone® (Bluetooth® 5.0) Universal compatibility up to 6.7” Maximum opening size 163 mm

Packaging contents

Nacon MG-X PRO Controller for iPhone® 80 cm USB-C cable
Quick IB
Quick Start Guide
Warranty
Use precautions
Compliance information

Control elements

nacon-1231-MG-X-PRO-MFi-Gaming-Holder-
fig-1

Turning the controller on/off

To turn on the controller, simply press the Home button, and the controller will connect to the last iPhone® it was synced with. To turn off the controller, simply hold down the Home button for 6 seconds.
Please note: the controller turns off after 15 minutes of inactivity to save battery power.

First start-up of the controller

Turn on the controller, and it will go straight into pairing mode. All 4 LEDs should flash at the same time.
Go to the Bluetooth® menu on your iPhone® and start a Bluetooth® device search. On your iPhone®, you should see the controller appear under the name ‘MG-X PRO MFI’, select it and wait until the controller is in the list of paired devices.

Syncing your iPhone® with the Nacon MG-X Pro controller

Go to the Bluetooth® menu on your iPhone® and start a Bluetooth® device Search. Press the Home button on your controller, the status LEDs should light up one by one. Press and hold the Bluetooth® button on the lower right-hand side for 2 seconds to initiate pairing. All 4 LEDs should flash at the same time. On your iPhone®, you should see the controller appear under the name ‘MG-X PRO MFI’, select it and wait until the controller is in the list of paired devices.The controller can store up to 5 devices. It will always try to connect to the most recent device first.
If you want to reset the list of devices stored in the controller:

Turn on the controller by holding down the Home button. Once it’s turned on, release the Home button.
Press and hold the Home and Bluetooth® buttons for 5 seconds.

The controller will return to pairing mode and should appear in the list of devices available for pairing.

Battery level indicator

You can see the battery’s charge level at any time while using the product. To do this, quickly double-click on the Home button.
The LEDs will toggle to indicate the battery’s charge level according to the code below:

Battery full (100%):
- all 4 LEDs are lit
Battery almost full (≥75%):
- 3 LEDs are lit
Medium battery (≥50%):
- 2 LEDs are lit
Low battery (≥25%):
- 1 LED is lit
Very low battery ( <25%):
- no LEDs light up
Critically low battery ( <10%):
- LED 1 will flash

Charging the controller

In this case, take the USB-C cable provided and plug it into the socket on the bottom of the left handle. Then plug the other end into one of the free USB ports on your PC or charger. The LEDs will light up one by one to indicate charging. Once all four LEDs are lit, your controller is fully charged.

**Quickly changing the iPhone® connected to your controller (TBC

game)**

You can switch from one iPhone® to the previously connected iPhone® at any time while using the product by quickly double-clicking the Bluetooth® button.

Product reset

If at any time during the use of the product you encounter difficulties with its operation, you can shut down the controller. To do this, take a paper clip or the tool for removing your SIM card from your phone, insert it into the hole on the back of your controller until you press the button there. After pressing the button, your controller will turn off and you will be able to turn it on again in the normal way via the Home button.

Compatibility

The Nacon MG-X PRO controller allows you to play on Microsoft’s cloud gaming service. An Xbox Game Pass subscription is required to access the gaming service. The Nacon MG-X PRO controller is compatible with games in the App Store that support controllers. To find out if the game you wish to play supports the MG-X Pro controller, please refer to the game’s page in the Apple App Store and look for the controller logo in the line where the game’s rating is located (you will need to scroll from right to left to see it).

Reconfiguring my controller buttons

The buttons on the Nacon MG-X PRO controller can be reconfigured. To do this you need to go to your phone’s options.
Example on iOS 15: go to Settings/General/Controller/Custom controls and select the button(s) you wish to change. You can restore the default values at any time by clicking on the ‘Restore default values’ button.
Please note: This option is only supported by the Apple® phone system, and Nacon® is not responsible for the availability or removal of this option.

Additional functions of the Options button

In your iPhone® menus, you can assign functions to the Options button on the Nacon MG-X PRO controller and provide quick access to the items listed below via a double tap or long press:

No
Take a screenshot
Start/stop recording
Capture a highlight

Example on iOS 15: go to Settings/ General/ Controller/ Custom Controls and scroll down the page to find the ‘SHARING GESTURES’ section, then set up the desired quick action.
Please note: This option is only supported by the Apple® phone system, and Nacon® is not responsible for the availability or removal of this option.

Mobile application

The Nacon MG-X PRO controller can be connected to the mobile application that can be downloaded from the phone’s App Store. To do this, look for the mobile application: ‘Nacon MG-X Series’. It will allow you to update your controller and much more!

Positioning your iPhone®

When using your iPhone® with the Nacon MG-X Pro controller, please place your phone in the dedicated slot to secure your device.

Please note: If your phone has a case, it may keep your phone from correctly fitting into the dedicated slot. In this case, to keep your phone from falling out, it is best that you remove your phone case.

Warning: Please be careful not to pinch your fingers in the sliding system when removing your iPhone® from the Nacon MG-X PRO.

Recycling

Your product contains a battery that falls under the EU directive 2006/66/EC and, therefore, cannot be disposed of with household waste. Please make sure you are aware of your local rules for separate collection of batteries, as proper disposal helps to avoid harmful effects on human health and the environment. The crossed-out wheelie bin symbol means that electrical and electronic waste and batteries may not be disposed of with the normal household waste but must be collected separately.

Important precautions

This product is designed for indoor use only. Do not expose it to direct sunlight or bad weather.
Do not expose the product to splashes, rain, drips or moisture. Do not immerse it in liquid.
Do not expose it to dust, high levels of humidity, extreme temperatures or mechanical shocks.
Do not use and do not open if the equipment is damaged. Do not attempt to repair it.
When cleaning the outside, only use a soft, clean, damp cloth. Detergents can damage the finish and get inside the product.
Never carry the product by holding it by the cable.
This product is not intended for use by people (including children) suffering from a physical, sensory or mental disability, or by users without the necessary and relevant experience or knowledge (unless they have been given advice and instructions beforehand on how to use the device from the person responsible for the user).Do not leave the product unattended, do not leave this product within the reach of children. Not suitable for children under the age of 7 (the cable can get wrapped around their neck).
The maximum operating temperature must not exceed 35°C

Precautions for using the battery

WARNING

If your product has a non-replaceable built-in battery, do not attempt to open the product or remove the battery as this may cause damage to the product and/or injury to yourself.
If your product has a replaceable built-in battery, use only the type of battery supplied by Nacon/RIG. Used batteries should be removed promptly and taken to appropriate waste collection centres.
RECYCLING: The product’s battery must be recycled or destroyed of in the appropriate manner.
Contact your local recycling centre for instructions on battery removal and disposal.
The battery has a limited lifetime. The time required to charge the battery increases gradually with use and over time. The life of the battery also depends on how it is stored, how much it is used, the environment and other factors.
Charging may not be as effective if done in other environments.
Battery life may vary depending on usage conditions and environmental factors.
If not used for a long time: When the controller is not used for a long period of time, it is recommended that you fully charge it at least once a year to keep it operational.
WARNING: Risk of fire, explosion and burns.
Do not leave your battery charged for an extended period of time without using the product
Do not allow metal objects, such as keys or coins, to come into contact with a battery or its holder.
Do not attempt to open or damage the battery. It may contain corrosive products which are dangerous if they come into contact with the eyes or skin and are toxic if ingested.
Never put a battery in your mouth. If ingested, contact a doctor or a poison control centre.
If the product contained in the battery comes into contact with your clothes, skin or eyes, please wash thoroughly with clear water and contact your doctor immediately.
Keep new and used batteries out of the reach of children.
Never throw a battery into a fire or oven because crushing or cutting a battery can cause an explosion;
The battery must not be subjected to extremely high or low temperatures, low air pressure at high altitudes during use, storage or transport, as this may result in an explosion or the escape of a flammable liquid or gas.

Ergonomics

Keeping your hand in the same position for a prolonged period of time can result in pain. If this happens repeatedly, please consult your doctor.As a precaution, take a 15-minute break every hour.

Technical specifications

Dimensions:
- 236 x 105 x 49 mm
Detachable cable length:
- 80 cm
Consumption:
- 5 V 500 mA
DC power supply
Battery life:
- 20 hours
Charging time:
- <2 hours
Voltage:
- 3.7 V
Power:
- 2.22 Wh
Type of battery:
- Lithium-ion
Battery capacity 600 mAh
The controller’s maximum operating temperature is 35°C
EIRP:
- Information on the emission power of the product:
- Frequency range:
  - (2.402 ~ 2.480) GHz
- Maximum radiofrequency emission power:
  - controller <13 dBm

Nacon hereby declares that the Nacon MG-X PRO radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.nacongaming.com

Technical support information

For any information you can contact a hotline. Beforeccalling, make sure you have gathered as much information as possible about the problem and thecproduct.

Email: support.fr@nacongaming.com
Website: www.nacongaming.com
Address: NACON, 396 – 466 Rue de la Voyette, CRT2 59273 Fretin, France
Monday to Friday (except public holidays): 10 am to 6 pm

In Belgium:
Email: support.fr@nacongaming.com
Website: www.nacongaming.com
Address: Bigben Interactive Belgium s.a./n.v. Waterloo Office Park / Bâtiment H Drève
Richelle 161 bte 15, 1410 Waterloo, Belgium