nacon NC1230 MG-X MFI Wireless Gaming Controller Instructions
- June 3, 2024
- nacon
Table of Contents
nacon NC1230 MG-X MFI Wireless Gaming Controller
The EIRP power values and the Frequency bands relating to this product, identified in the list below, comply with the requirements of Directive 2014/53/EU
- EIRP : NC1230 MG-X MFI Wireless Controller – <13dBm
- Frequency band :(2,402 ~ 2,480) GHz
UK RE Regulation ‘Informal DoC’ statement
NC1230 MG-X MF/ Wireless controller
Hereby Nacon declares that this product is in compliance with the relevant
statutory requirements. For details please access the following web address:
https://my.nacongaming.com/fr-FR/support
The frequencies used by the wireless networking feature of this product are
the 2.4GHz and/or Btuetooth•
range.
Wireless frequency band and maximum output power:
- Frequency Band: 2.402GHz – 2.48oGhz
- Maximum Output Power: < 13dBm / 20mW
CANADA
CAN ICES-3 (B)/NMB-3(B)
ICSTATEMENT:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused
MANUFACTURER/ FABRICANT:
NACON – 396- 466 Rue de 1a Voyette,CRT2 – 59273 Fretin, France
DISTRIBUTORS/ DISTRIBUTEURS:
Bigben lnteractive DEUTSCHLANO GmbH Walter Gropius Str. 28, 50126 Bergheim,
Deutschland
BigbenInteractive Belgiums.a./n.v. Waterloo Office Park/ Batiment H
Bigben Interactive NEDERLAND b.v. ‘s-Gravelandseweg 80, 1217 EW Hilversum,
Nederland Nacon Gaming ESPANA S.L.
Calle Velazquez, 31 3″ Dcha, 28001 Madrid, Espana BigbenInteractive ITALIA
s.r.l
www.nacongammg.com
SUPPORT:
FRANCE, du lundi au vendredi
10h00-18h00 ou support.fr@nacongaming.com
UK, support@lnacongaming.com
Tel.: +44 080B1010970
UNITED STATES, support.us@nacongaming.com
Disposal
- A crossed-out wheelie bin symbol denotes that waste electrical and electronic equipment and batteries must not be disposed of as unsorted municipal waste, but collected separately.
- Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative – consequences for the environmental and human health
- Nacon hereby declares that the radio equipment type “MG-X Wireless Controller’ complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following web address: https://my.nacongaming.com/support.
- Link to the full product declaration: https://my.nacongaming.com/support
FCC
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure conditions without restriction
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>