fatboy 346 Hotspot Pillow Instruction Manual
- June 3, 2024
- fatboy
Table of Contents
fatboy 346 Hotspot Pillow
Package Content
FIRST TIME USE
WASH INSTRUCTIONS
Fatboy® product
information Hotspot:
Hotspot is a battery powered heating product using infrared (FIR) technology.
Hotspot can easily be turned on by pressing the switch on the Fatboy label, it
has three heat settings indicated by the LEDs on the label.
- Step 1: 28-32 Degrees Celsius
- Step 2: 34-38 Degrees Celsius
- Step 3: 38-42 Degrees Celsius
There is also a battery indicator on the label showing the remaining battery capacity indicated by 4 LEDs.
- 100-75%
- 75-50%
- 50-25%
- 25-0%
The Hotspot can easily be charged using the USB charger included. On the back
of the Fatboy label there is a charging port. Just snap the magnetic charging
cable to the back of the label, insert the adapter into a suitable power
supply and the charging will start, this will take up to 3 hours. In the
meantime, the LEDs will indicate the battery status.
WARNING: READ CAREFULLY BEFORE USE!
- Please use the 5V 2.4A adapter included to charge your Hotspot.
- Only use the USB cable supplied to charge your Hotspot.
- Keep your Hotspot dry.
- Do not expose your Hotspot to excessive heat from external heat sources.
- This is not a toy, please keep away from children.
Instructions for use and maintenance
First time use:
- After unpacking, please connect the battery to the control panel inside the Fatboy® label. There is a Barrel plug inside the cover to which the battery can be connected.
- Hotspot Lungo: The battery itself can be stored in the front pocket of the pillow. After the battery has been stored, please put on the pillow cover and close the zipper.
- Hotspot Quadro: The battery itself can be stored in the front pocket of the pillow. After the battery has been stored, please put on the pillow cover and close the zipper.
- Hotspot Blanket: The battery can be stored in the pocket behind the Fatboy® label, which is attached with Velcro and can easily be removed to store and connect the battery.
General use:
- Charge the Hotspot by inserting the USB cable into the adapter and snap the magnetic charger to the back of the label.
- Connect the adapter to the power supply. It will take approximately 3 hours to fully charge the battery. The led indicators will show the battery status. The battery is charging when the indicator is blinking. When all four LEDs are lit and no longer blinking, the battery is fully charged.
- The Hotspot can be controlled by the switch on the Label.
- Press the button hidden underneath the ‘O’ of the Fatboy® logo once to turn it on.
- Press the button a second time to switch to the next heat setting (Medium).
- Press the button a third time to switch to the maximum heat setting (Hot).
- Press the button one more time to turn it off.
- When you press and hold the button for 2 seconds, the battery indicator will show the battery status.
- When the Hotspot turns off by itself (after a blinking battery indicator) it indicates the battery needs to be charged.
- Charging the Hotspot should always be done indoors.
Maintenance:
- If you don’t use the Hotspot for a longer period of time, please make sure you recharge the battery at least every three months to keep the battery in good condition.
Cleaning:
NOTE: THE FILLING AND ELECTRONIC COMPONENTS ARE NOT WASHABLE and should be kept dry.
- The Hotspot Lungo cover can be hand washed. Please remove the cover before washing, and take the inner bag and electronic components out.
- The Hotspot Quadro cover can be hand washed. Please remove the cover before washing, and take the inner bag and electronic components out.
- The Hotspot Blanket can be hand washed. Please remove the Fatboy label and battery before washing.
- Do not use cleaning agents which contain alcohol, benzene, abrasive substances or chemicals.
Trouble shooting:
The Hotspot is not working well:
The product is not responding at all when pressing the on/off switch:
- Try to charge the pillow/blanket using the adapter and USB cable provided with Hotspot.
- When you attach it to the charger, the indicator lights on the Fatboy® label should light up(blinking) indicating the charging process has started.
The product is still not responding:
- If the product is not responding when you connect the charger, please open-up the pillow cover and check the connection between the control panel inside the label and the battery. These two are connected by a barrel plug, please check to make sure they are connected properly.
- Also check the connection between the control panel inside the label to the heating pad at the same time.
- Please try to turn it on again, and check one final time to see if the product responds to the charger.
If these instructions didn’t resolve the issue, please get in touch with
Fatboy® or your
local Fatboy® dealer.
IMPORTANT!
Please contact your Fatboy® dealer if you have any problems.
Technical specifications:
- Model: Fatboy® Hotspot
- Secondary rating (adapter recommendation):
- 5 VDC 2.4 A
- Safety Class: Class III
- Connection: USB to Magnetic Pogo Pin charger
- Heat source: Carbon mesh heating pad
- Switch: Built-in three step heat control.
- IP value: 21
- Ambient temperature: -10 to 40 ºC
- Materials: Polyester
- Internal battery: Lithium-ion battery 11.1v 2600mAh.
- Duration: Step1: 7.5hrs, Step2: 4hrs, Step3: 2.5hrs Watt: Step1—-3W, Step2—-6W, Step3—-9W.
Dimensions:
- Fatboy® Hotspot Lungo: 40cm x 55cm x 17,5cm
- Fatboy® Hotspot Quadro: 45cm x 45cm x 17,5cm
- Fatboy® Hotspot Blanket: 200cm x 140cm x 2cm (thickness approx. 2cm)
Total weight:
- Fatboy® Hotspot Lungo: 1300 Grams
- Fatboy® Hotspot Quadro: 1300 Grams
- Fatboy® Hotspot Blanket: 1964 Grams
- Rating info Fatboy® Hotspot
- Charging rate 5V 2.4A (Charger included) Rating: 11.1v DC
- Heat Module: Carbon Mesh
- Made in China
Model no:
- Fatboy® Hotspot Lungo
- Fatboy® Hotspot Quadro
- Fatboy® Hotspot Blanket
This heating product contains a heat and power source, which can be replaced
by the end user and can be purchased from www.fatboy.com or from your local
Fatboy® dealer. We do not recommend to use the Hotspot with the adapter
connected for a long time, this can seriously reduce the battery life time!
NOTE: PLEASE MAKE SURE TO USE A 5V, 2.4A CHARGER to avoid damaging to
your Fatboy® Hotspot.
CE-Directive:
This product complies with the requirements and other relevant provisions of the current European RoHS and CE directives.
WEEE instructions:
This product is subject to the provisions of the WEEE directive 2012/19/EU. Do
not dispose of this Product together with regular household waste. Consult
your local waste disposal authorities for information on collection point for
electrical and electronic waste products.
Terms of guarantee:
We thank you for purchasing this Fatboy® product and trust that you will enjoy
its use. Should you need to use our guarantee service, please contact your
Fatboy® dealer. For more information about our dealers, please visit
www.fatboy.com
NOTE:
Changes or modifications which are not explicitly approved by the party
responsible
for compliance may void the user’s authorization to use the equipment.
THIS MANUAL IN OTHER LANGUAGES?
GO TO WWW.FATBOY.COM
Please contact your Fatboy® dealer or Fatboy® direct if you have any questions
or problems.