NEWSTAR LED-W420BLACK AV and IT Flat Screen Wall Mounts User Guide

AV and IT Flat Screen Wall Mounts
User Guide LED-W420BLACK

LED-W420BLACK AV and IT Flat Screen Wall Mounts

Caution

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.

2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.

3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personnel injuries arising out of human factors or acts of God, such as earthquake or typhoon.

4. It is recommended that the Wall mount bracket be installed by qualified personnel only

5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.

6. Please carefully inspect the area where the wall mount is to be installed:
   – Avoid places that are subject to high temperatures, humidity or contact with water.
   – Do not install the product near air conditioning vents or areas with excess dust and fumes.
   – Only install on vertical walls and avoid slanted surfaces.
   – Do not install in places subject to any shock or vibration.
   – Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue when viewing the display panel.

7. Maintain sufficient space around the display to ensure adequate ventilation.

8. To ensure safe installation, first check the structure of the wall and select a secure mounting location.

9. The wall should be strong enough to sustain a weight of at least four times of the display and Wall mount bracket combined. The mounting locationmust be able to withstand earthquake or other strong shock.

10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.

11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).

12. Drill holes and bolts will be left in the wall once the display and Wall mount bracket are removed. Stains may occur after extended use.

13. Since the manufacturer has no way to control the wall type and installation of wall mount, the warranty of the product shall only cover the body of the wall mount. The warranty period of the product is 5 years.

14. Please consult the English language manual for any dispute on conditions.

Part

Step 1
Remove the covers and VESA plate

Step 2a
Install the wall plate on a wood stud

Step 2b
Install the wall plate on a solid brick or concrete wall

Step 3
Place the covers![NEWSTAR LED W420BLACK AV and IT Flat Screen Wall Mounts

• fig 4](https://manuals.plus/wp-content/uploads/2022/11/NEWSTAR-LED- W420BLACK-AV-and-IT-Flat-Screen-Wall-Mounts-fig-4.png)

Step 4
Assemble the VESA plate

Step 5
Attaching the VESA Plate to the screen

Option

Use spacers if necessary

Step 6
Attach the TV onto the wall plate

Step 7
Run cable through the cable cover

Step 8
Adjust the mount to your desired position

www.newstar.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>