LENOX 3001919L Bi Metal Speed Slot Hole Saws User Guide

LENOX 3001919L Bi Metal Speed Slot Hole Saws

HOLE SAW SELECTION GUIDE

SPEED SLOT® HOLE SAWS WITH T3 TECHNOLOGY™

50% Longer Life. 2X More Durable.*

IMPROVED METAL CUTTING PERFORMANCE

Increased wall thickness improves durability and minimizes tooth loss
Optimized tooth design penetrates metal with ease

FAST, EFFICIENT CUTTING IN WOOD
Larger, sharper teeth remove more wood for fast cutting

EASY PLUG REMOVAL
SPEED SLOT staircase design for fast, easy plug ejection vs. Prior LENOX Generation

BI-METAL SPEED SLOT® HOLE SAW WITH T3 TECHNOLOGY™

DIaMeTer| 1 per boX| 1 per blISTer Seal| 1 paCk arboreD| pIpe Tap| pIpe eNTraNCe| USe arbor
---|---|---|---|---|---|---
IN MM| proD No| proD No| proD No| IN| MM| IN| MM| snap-BaCK ™| STaNDarD
9/16| 14.3| 300099L| 1787781| 1772423| —| —| —| —| 5L| 1L, 4L or 5L
5/8| 15.9| 3001010L| 1771823| 1772424| —| —| —| —| 5L| 1L, 4L or 5L
11/16| 17.5| 3001111L| 1787773| 1772425| —| —| —| —| 5L| 1L, 4L or 5L
3/4| 19.1| 3001212L| 1771952| 1772426| 1/2| 12.7| 3/8| 9.5| 5L| 1L, 4L or 5L
25/32| 19.8| 3009820MMHS| 1771962| 1772427| —| —| —| —| 5L| 1L, 4L or 5L
13/16| 20.6| 3001313L| 1787775| 1772428| —| —| —| —| 5L| 1L, 4L or 5L
7/8| 22.2| 3001414L| 1771953| 1772429| 3/4| 19.1| 1/2| 12.7| 5L| 1L, 4L or 5L
15/16| 23.8| 3001515L| 1787776| 1772430| —| —| —| —| 5L| 1L, 4L or 5L
1| 25.4| 3001616L| 1771954| 1772481| —| —| —| —| 5L| 1L, 4L or 5L
1-1/16| 27.0| 3001717L| 1771955| 1772482| —| —| —| —| 5L| 1L, 4L or 5L
1-1/8| 28.6| 3001818L| 1771959| 1772483| 1| 25.4| 3/4| 19.1| 5L| 1L, 4L or 5L
1-3/16| 30.2| 3001919L| 1787777| 1772474| —| —| —| —| 5L| 1L, 4L or 5L
1-1/4| 31.8| 3002020L| 1771960| 1772491| —| —| —| —| 2L, 6L| 2L, 3L or 6L
1-5/16| 33.3| 3002121L| 1787778| 1772492| —| —| —| —| 2L, 6L| 2L, 3L or 6L
1-3/8| 34.9| 3002222L| 1771961| 1772727| —| —| 1| 25.4| 2L, 6L| 2L, 3L or 6L
1-7/16| 36.5| 3002323L| 1787779| 1772728| —| —| —| —| 2L, 6L| 2L, 3L or 6L
1-1/2| 38.1| 3002424L| 1771963| 1772729| 1-1/4| 31.8| —| —| 2L, 6L| 2L, 3L, 6L or 7L
1-9/16| 39.7| 3002525L| 1787780| 1772730| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
1-5/8| 41.3| 3002626L| 1771964| 1772931| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
1-11/16| 42.9| 3002727L| 1787800| 1772932| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
1-3/4| 44.5| 3002828L| 1771967| 1772933| 1-1/2| 38.1| 1-1/4| 31.8| 2L, 6L| 2L, 3L, 6L or 7L
1-13/16| 46.0| 3002929L| 1787841| 1772935| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
1-7/8| 47.6| 3003030L| 1771968| 1772778| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2| 50.8| 3003232L| 1771970| 1772779| —| —| 1-1/2| 38.1| 2L, 6L| 2L, 3L, 6L or 7L
2-1/16| 52.4| 3003333L| 1787842| 1772780| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-1/8| 54.0| 3003434L| 1772003| 1772951| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-1/4| 57.2| 3003636L| 1771983| 1772952| 2| 50.8| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-3/8| 60.3| 3003838L| 1771984| 1772953| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-1/2| 63.5| 3004040L| 1771987| 1772954| —| —| 2| 50.8| 2L, 6L| 2L, 3L, 6L or 7L
2-9/16| 65.1| 3004141L| 1787843| 1772955| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-5/8| 66.7| 3004242L| 1771988| 1772956| 2-1/2| 63.5| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-11/16| 68.3| 3004343L| 1771989| —| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-3/4| 69.9| 3004444L| 1771990| 1772961| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
2-7/8| 73.0| 3004646L| 1787844| 1772962| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3| 76.2| 3004848L| 1772021| 1772963| —| —| 2-1/2| 63.5| 2L, 6L| 2L, 3L, 6L or 7L
3-1/8| 79.4| 3005050L| 1772022| 1772964| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3-1/4| 82.6| 3005252L| 1772023| 1772966| 3| 76.2| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3-3/8| 85.7| 3005454L| 1787845| 1772945| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3-1/2| 88.9| 3005656L| 1772012| 1772946| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3-5/8| 92.1| 3005858L| 1772013| 1772949| —| —| 3| 76.2| 2L, 6L| 2L, 3L, 6L or 7L
3-3/4| 95.3| 3006060L| 1787846| 1772950| 3-1/2| 85.7| —| —| 2L, 6L| 2L, 3L, 6L or 7L
3-7/8| 98.4| 3006262L| 1787847| 1773001| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
4| 101.6| 3006464L| 1772014| 1773002| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
4-1/8| 104.8| 3006666L| 1772018| 1773003| —| —| 3-1/2| 85.7| 2L, 6L| 2L, 3L, 6L or 7L
4-1/4| 108.0| 3006868L| 1772019| 1773004| 4| 95.3| —| —| 2L, 6L| 2L, 3L, 6L or 7L
4-3/8| 111.1| 3007070L| 1787848| 1773005| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
4-1/2| 114.3| 3007272L| 1772075| 1773006| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
4-5/8| 117.5| 3007474L| 1787850| —| —| —| 4| 95.3| 2L, 6L| 2L, 3L, 6L or 7L
4-3/4| 120.7| 3007676L| 1772076| 1773008| 4-1/2| 108.0| —| —| 2L, 6L| 2L, 3L, 6L or 7L
5| 127.0| 3008080L| 1772077| —| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
5-1/2| 139.7| 3008888L| 1787785| —| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L
6| 152.4| 3009696L| 1772121| —| —| —| —| —| 2L, 6L| 2L, 3L, 6L or 7L

RECOMMENDED HOLE SAW RPM

BI-METAL

DIaMeTer| M I l D

STeel

| T oo l / S T a I N l e S S STeel| CaST

IroN

| ****

braSS

| ****

alUM

---|---|---|---|---|---
IN| MM
9/16              14.3             580                   300 400            790              900
5/8| 15.9| 550| 275| 365| 730| 825
11/16| 17.5| 500| 250| 330| 665| 750
3/4| 19.1| 460| 230| 300| 600| 690
25/32| 19.8| 425| 210| 280| 560| 630
13/16| 20.6| 425| 210| 280| 560| 630
7/8| 22.2| 390| 195| 260| 520| 585
15/16| 23.8| 370| 185| 245| 495| 555
1| 25.4| 350| 175| 235| 470| 525
1-1/16| 27.0| 325| 160| 215| 435| 480
1-1/8| 28.6| 300| 150| 200| 400| 450
1-3/16| 30.2| 285| 145| 190| 380| 425
1-1/4| 31.8| 275| 140| 180| 360| 410
1-5/16| 33.3| 260| 135| 175| 345| 390
1-3/8| 34.9| 250| 125| 165| 330| 375
1-7/16| 36.5| 240| 120| 160| 315| 360
1-1/2| 38.1| 230| 115| 150| 300| 345
1-9/16| 39.7| 220| 110| 145| 290| 330
1-5/8| 41.3| 210| 105| 140| 280| 315
1-11/16| 42.9| 205| 100| 135| 270| 305
1-3/4| 44.5| 195| 95| 130| 250| 295
1-13/16| 46.0| 190| 95| 125| 250| 285
1-7/8| 47.6| 180| 90| 120| 240| 270
2| 50.8| 170| 85| 115| 230| 255
2-1/16| 52.4| 165| 80| 110| 220| 245
2-1/8| 54.0| 160| 80| 105| 210| 240
2-1/4| 57.2| 150| 75| 100| 200| 225
2-3/8| 60.3| 140| 70| 95| 190| 220
2-1/2| 63.5| 135| 65| 90| 180| 205
2-9/16| 65.1| 130| 65| 85| 175| 200
2-5/8| 66.7| 130| 65| 85| 170| 195
2-11/16| 68.3| 125| 60| 80| 160| 185
2-3/4| 69.9| 125| 60| 80| 160| 185
2-7/8| 73.0| 120| 60| 80| 160| 180
3| 76.2| 115| 55| 75| 150| 170
3-1/8| 79.4| 110| 55| 70| 140| 165
3-1/4| 82.6| 105| 50| 70| 140| 155
3-3/8| 85.7| 100| 50| 65| 130| 150
3-1/2| 88.9| 95| 45| 65| 130| 145
3-5/8| 92.1| 95| 45| 60| 120| 140
3-3/4| 95.3| 90| 45| 60| 120| 135
3-7/8| 98.4| 85| 40| 55| 110| 130
4| 101.6| 85| 40| 55| 110| 130
4-1/8| 104.8| 80| 40| 55| 110| 120
4-1/4| 108.0| 80| 40| 55| 110| 120
4-3/8| 111.1| 75| 35| 50| 100| 105
4-1/2| 114.3| 75| 35| 50| 100| 105
4-5/8| 117.5| 75| 35| 50| 100| 105
4-3/4| 120.7| 70| 35| 45| 90| 95
5| 127.0| 70| 35| 45| 90| 95
5-1/2| 139.7| 65| 30| 40| 85| 90
6| 152.4| 65| 30| 40| 85| 90

BI-METAL SPEED SLOT® HOLE SAW  WITH T3 TECHNOLOGY™ KITS

Convenient Storage for Trade-Specific Uses

DURABLE
Durable construction resists damage caused by drops and tough workplace environments

SECURE
Latches close case tightly and securely

LONG LASTING
Metal latches and metal pin hinges won’t break or tear

CONTRACTOR’S HOLE SAW 5 PACKS VALUE & CONVENIENCE

Unique packaging provides value and convenience for high-volume users

ARBORED KITS

• 34082600AP 6 Piece kit PLUMBER’S KIT
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″
  Large Kit

• 34081600AE 6 Piece kit Electrician’s KIT
  7/8″, 1-/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″
  Large Kit

CONTRACTOR’S Kits

• 30370400G 5 Piece kit
  2″, 3″, 3-3/8″, 4-1/8″
  Standard Arbor: 2L
  large Kit

• 30374500G 9 Piece kit
  2-1/8″, 2-9/16″, 3-1/4″, 3-3/4″, 4-3/4″
  Standard Arbor: 2L Three pilot drills
  Large Kit

• 308042000G 26 Piece kit –BIG DADDY ™
  3/4″, 7/8″, 1″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″, 2-11/16″, 3″, 3-1/4″, 3-3/8″, 3-5/8″, 3-3/4″, 4-1/8″, 4-1/2″, 4-3/4″
  Standard Arbors: 1L, 2L, 5L Three pilot drills
  Large Kit

• 308201200G 17 Piece kit
  5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/2″, 3″
  Standard Arbors: 1L, 2L Three pilot drills
  Large Kit

• 30807700G 9 Piece kit
  7/8″, 1″, 1-1/4″, 1-3/8″, 1-1/2″, 1-3/4″, 2-1/8″
  Standard Arbors: 5L, 6L
  medium Kit

• 1815140 7 Piece kit
  7/8″, 1″, 1-1/8″, 1-1/2″, 2-1/8″
  Standard Arbors: 2L, 5L
  mini kit

Electrician’s Kits

• 30856C600L 9 Piece Kit
  7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″
  Standard Arbors: 2L, 5L One Arbor adaptor
  medium Kit

• 30800600L 10 Piece kit
  7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″
  Standard Arbors: 2L, 5L One pilot drill One Arbor adaptor
  large Kit

• 308021200L 17 Piece kit
  3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″, 2-11/16″, 3″, 3-5/8″, 4-1/8″, 4-3/4″
  Standard Arbors: 2L, 5L Three pilot drills
  Large Kit

• 1815139 8 Piece kit
  7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″
  Standard Arbors: 2L, 5L
  mini kit

plumber’s Kits

• 30860C600P 9-PIECE KIT
  3/4″, 7/8″, 1-1/8″, 1-3/8″, 2″, 2-1/2″
  Standard Arbors: 2L, 5L One Arbor adaptor
  medium Kit

• 30808600P 10 Piece kit
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″
  Standard Arbors: 2L, 5L One pilot drill One Arbor adaptor
  large Kit

• 1853786 10 Piece kit
  2-1/8″, 2-1/4″, 2-9/16″, 2-3/4″, 3-5/8″, 4″, 4-5/8″
  Standard Arbor: 2L Two pilot drills
  large Kit

• 308011200P 17 Piece kit
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″, 2-9/16″, 3″, 3-1/2″, 4″, 4-1/4″, 4-1/2″
  Standard Arbors: 2L, 5L Three pilot drills
  large Kit

• 1815195 7 Piece Kit
  1-1/4″, 1-3/8″, 1-1/2″, 2″, 2-1/2″
  Standard Arbors: 2L, 5L
  mini kit

Refrigeration Kit

• 30830600R 8 Piece Kit
  5/8″, 7/8″, 1-1/8″ 1-3/8″, 1-5/8″, 2-1/8″
  Standard Arbors: 5L, 6L
  medium Kit

WELDER’S Kit

• 14789600W 9 Piece Kit
  3/4″, 7/8″, 1″, 1-1/4″, 1-1/2″, 2″
  Standard Arbors: 2L, 5L One Arbor adaptor
  medium Kit

Automotive Kit

• 30805500A 7 Piece kit
  3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″
  Standard Arbor: 5L One Arbor adaptor
  Compact Kit

SNAP-BACK™ ARBORS

No Tools. No Adaptors. No Screwing Around.

QUICK CHANGE
Faster and easier to engage/disengage hole saw

PREVENTS THREADS FROM STRIPPING
Drives off pins, not threads

NO TOOLS NEEDED
Prevents hole saw from locking on arbor

NO ADAPTOR REQUIRED
Standard Arbor threads directly into all hole saws

EASIER PLUG REMOVAL

proD No| DeSC| fITS Hole SawS| SIzeS| THreaD SIze| SHaNk Type| SHaNk SIze
---|---|---|---|---|---|---
IN| MM| IN| MM
1779772            2L                20L-96L                         1-1/4–6 31.8–152.4           5/8–18                    Solid Hex            1/2 & larger           12.7 & larger
1779669| 5L| 9L-19L| 9/16–1-3/16| 14–30| 1/2–20|  | Solid Hex| 3/8 & larger| 9.5 & larger
1779670| 6L| 20L-96L| 1-1/4–6| 31.8–152.4| 5/8–18|  | Solid Hex| 3/8 & larger| 9.5 & larger

|  |  |  |  |  |  |  |  |
 |  |  | ****

|  |  | ****

|  |  | ****

snap-back QUICK CHANGE EXTENSIONS

DURABILITY AND EXTENDED LIFE
Carbon steel collar and shaft for durability and extended life

ONE-HANDED RELEASE
SNAP-BACK Quick Change mechanism for quick and easy release

BIT HELD SECURELY IN PLACE
Holds bits securely on ball detent bits (Quick Change) 1/4″ extension works with 1/4″ arbors and insert bits. It is magnetic for additional holding power

1852050         5-1/2         140         7/16       11                  2L 1L, 2L, 3L
1906836| 12| 305| 1/4| 6.4| —| 4L
---|---|---|---|---|---|---
1852047| 12| 305| 3/8| 9.5| 5L, 6L| 5L, 6L, 7L
1852048| 12| 305| 7/16| 11| 2L| 1L, 2L, 3L
1852049| 18| 457| 7/16| 11| 2L| 1L, 2L, 3L

STANDARD ARBORS & ACCESSORIES

Arbors & Accessories for All Your Drilling Needs

ADDED DURABILITY
Hardened carbon steel for strength

STARTS ON CONTACT
Split point pilot drill for faster penetration and less walking

proD No| DeSC| fITS Hole

SawS

| SIzeS| SHaNk

Type

| SHaNk SIze| prIMary feaTUre
---|---|---|---|---|---|---
IN| MM| IN| MM
1779774         1L               9L–19L           9/16–1-3/16      14.3–30.2 Hollow Hex        1/2 & larger          12.7 & larger  Adjustable pilot bit
1779801| 2L| 20L–96L| 1-1/4–6| 31.8–152.4| Solid Hex| 1/2 & larger| 12.7 & larger| Use for enlarging holes
1779802| 3L| 20L–96L| 1-1/4–6| 31.8–152.4| Solid Hex| 1/2 & larger| 12.7 & larger| Solid shank
1779803| 4L| 9L–19L| 9/16–1-3/16| 14.3–30.2| 3 Sided| 1/4 & larger| 6.4 & larger| Adjustable pilot bit, 3 flats on shank
1779804| 5L| 9L–19L| 9/16–1-3/16| 14.3–30.2| Hex| 3/8 & larger| 9.5 & larger| Use for 9A-19A arbored hole saws
1779805| 6L| 20L–96L| 1-1/4–6| 31.8–152.4| Hex| 3/8 & larger| 9.5 & larger| Quick change arbor
1779806| 7L| 24L–96L| 1-1/2–6| 31.8–152.4| Hex| 3/8 & larger| 9.5 & larger| Plug ejection feature

ACCESSORIES

1/4                              6.4                            — 1L, 4L
1779841| 4-1/4″ Pilot Drill (25 pack)| 1/4| 6.4| —| 1L, 4L
---|---|---|---|---|---
1779810| 3-1/4″ Pilot Drill (1 pack)| 1/4| 6.4| 2L, 5L, 6L| 2L, 3L, 5L, 6L, 7L
1864904| 3-1/4″ Pilot Drill (25 pack)| 1/4| 6.4| 2L, 5L, 6L| 2L, 3L, 5L, 6L, 7L
30297123CT| Carbide Tipped Pilot Drill (1 pack)| 1/4| 6.4| —| 1L, 4L
3029865CTPD| Carbide Tipped Pilot Drill (1 pack)| 1/4| 6.4| 2L,5L, 6L| 2L, 3L, 5L, 6L, 7L
30857AA1| Standard Arbor Adaptor (1 pack)| —| —| 5L| 1L, 4L, 5L
3084818X| 18″ Extension (1 pack)| 1/2 & larger| 12.7 & larger| 2L| 1L, 2L, 3L
3084712X| 12″ Extension (1 pack)| 1/2 & larger| 12.7 & larger| 2L| 1L, 2L, 3L
3084310X*| 10″ Extension (1 pack)| 3/8 & larger| 9.5 & larger| 5L, 6L| 5L, 6L, 7L
3084655X| 5-1/2″ Extension (1 pack)| 1/2 & larger| 12.7 & larger| 2L| 1L, 2L, 3L
2910114| 1/4″ x 1/4″ Set Screw| —| —| 2L, 5L, 6L| 2L, 3L, 5L, 6L, 7L
29102516| 5/16″ x 5/16″ Set Screw| —| —                                — 1L, 4L, Extension
3087935PD| 1/4” Split point stubby pilot bit| —| — —                                       —
308803CHCAS| Plug ejection springs| —| —                               — —

LENOX DIAMOND™ HOLE SAW S

More Holes. Less Time.

LONG-LASTING
Continuous, brazed edge lasts longer in tile and stone

DURABLE
Robust design for greater durability in tough applications

FAST, EASY CUTTING
Low torque, little pressure required

EASIER PLUG REMOVAL
Over-sized slot in hole saw for easy plug removal
USE STANDARD ARBOR, SNAP-BACK™ ARBOR FOR BEST RESULTS USE THE LENOX ARBOR WITH RETRACTABLE PILOT DRILL

ONE PIECE HOLE

1 per paCk| IN| MM| pIpe Tap| pIpe eNTraNCe| **rpM*|
---|---|---|---|---|---|---
proD No| IN| MM| IN| MM| IN| MM**|
121063DGDS| 3/16| 5| —| —| —| —| 1500| 2000|
121074DGDS| 1/4| 6| —| —| —| —| 2000|  | 2500
121085DGDS| 5/16| 8| —| —| —| —| 2000|  | 2500
121096DGDS| 3/8| 10| —| —| —| —| 2000|  | 2500
121108DGDS| 1/2| 13| —| —| —| —| 2000|  | 2500
1211110DGDS| 5/8| 16| —| —| —| —| 1500|  | 2000
1211212DGDS| 3/4| 19| 3/4| 13| 3/8| 10| 1500|  | 2000
1211416DGDS| 1| 25| —| —| —| —|  | —|
1211622DGDS| 1-3/8| 35| —| —| 1| 25|  | —|

STANDARD HOLE SAWS

1 per paCk| IN| MM| pIpe Tap| pIpe eNTraNCe| USe arbor| **rpM*
---|---|---|---|---|---|---
proD No| IN| MM| IN| MM| r e T r a C T a b l e| snap-BaCK| STaNDarD| IN| MM**
1211314DGHS| 7/8| 22| 3/4| 19| 1/2| 13| —| 5L| 1L, 4L, 5L| 800| 1200
1225618DGHS| 1-1/8| 29| 1| 25| 3/4| 19| —| 5L| 1L, 4L, 5L| 500| 900
1211520DGHS| 1-1/4| 32| —| —| —| —| 5L 5/8-18| 2L, 6L| 2L, 3L, 6L| 500| 900
1211722DGHS| 1-3/8| 35|  |  | 1| 25| 5L 5/8-18| 2L, 6L| 2L, 3L or 6L| 500| 900
1211824DGHS| 1-1/2| 38| 1-1/4| 32| —| —| 5L 5/8-18| 2L, 6L| 2L, 3L, 6L, 7L| 500| 900
1211932DGHS| 2| 51| —| —| 1-1/2| 38| 5L 5/8-18| 2L, 6L| 2L, 3L, 6L, 7L| 400| 800
1212040DGHS| 2-1/2| 64| —| —| 2| 51| 5L 5/8-18| 2L, 6L| 2L, 3L, 6L, 7L| 200| 600

Suggested RPMs only: Porcelain, Ceramic, Slate, Granite, Marble, Glass, Fiberglass, Travertine, Cement Board, Laminates

ARBOR WITH RETRACTABLE PILOT DRILL

CENTERING PIN ELIMINATES WALKING

CARBIDE TIPPED FOR LONGER LIFE

proD No| DeSC| fITS dIamond

Hole SawS

| SIzeS| SHaNk Type| SHaNk SIze
---|---|---|---|---|---
IN| MM| IN| MM
1970538     5L 5/8-18           Standard             1-1/4–2-1/2  32–64  Solid Hex  3/8 & larger  9.5 & larger
proD No DeSCrIpTIoN| CHUCk SIze| fITS arbor
---|---|---
IN| MM| S o l I D HeX
1970540             Retractable Pilot Drill                      1/4 6.4                  5L 5/8-18

LENOX DIAMOND Kit

• 1853785 10 Piece kit
  1/4″, 3/4″, 7/8″, 1-1/8″, 1-3/8″, 2″, 2-1/2″
  Arbors: 2L, 5L. Hex Wrench
  Large Kit

CARBIDE GRIT HOLE SAWS

Best for Cutting Abrasive Materials

CUTS ABRASIVE MATERIALS
Tungsten carbide grit cuts through fiberglass, ceramic tile, laminates and other abrasive materials

CLEAN CUTTING
Carbide grit edge will not snag or chip when cutting thin materials

Use standard Arbor or SNAP-BACK™ Arbor

1 per boX| DIaMeTer| pIpe Tap| pIpe eNTraNCe| USe arbor| reCoMMeNDeD rpM oNly
---|---|---|---|---|---
__

proD No

| __

IN

| __

MM

| __

IN

| __

MM

| __

IN

| __

MM

| __

SNap-baCk

| __

STaNDarD

| brICk, D r y w a ll , porCelaIN, Marble, CeraMIC T I l e| S l a T e , fIberGlaSS, p a r T I C l e boarD, l a M I N a T e S , GraNITe, CeMeNT| __

CaST

IroN

2991212CG            3/4           19.1      1/2        12.7       3/8 9.5                   —                        1L, 4L 800                                                  900 600
2999820MMCG| 25/32| 19.8| —| —| —| —| —| 1L, 4L| 800| 900| 600
2991414CG| 7/8| 22.2| 3/4| 19.1| 1/2| 12.7| —| 1L, 4L| 800| 900| 600
2991616CG| 1| 25.4| —| —| —| —| —| 1L, 4L| 800| 900| 600
2991818CG| 1-1/8| 28.6| 1| 25.4| 3/4| 19.1| —| 1L, 4L| 500| 600| 400
2992020CG| 1-1/4| 31.8| —| —| —| —| 2L| 2L| 500| 600| 400
2992222CG| 1-3/8| 34.9| —| —| 1| 25.4| 2L| 2L| 500| 600| 400
2992424CG| 1-1/2| 38.1| 1-1/4| 31.8| —| —| 2L| 2L, 7L| 500| 600| 400
2992828CG| 1-3/4| 44.5| 1-1/2| 38.1| 1-1/4| 31.8| 2L| 2L, 7L| 500| 600| 400
2993232CG| 2| 50.8| —| —| 1-1/2| 38.1| 2L| 2L, 7L| 400| 500| 200
2993434CG| 2-1/8| 54| —| —| —| —| 2L| 2L, 7L| 400| 500| 200
2993636CG| 2-1/4| 57.2| 2| 50.8| —| —| 2L| 2L, 7L| 400| 500| 200
2993838CG| 2-3/8| 60.3| —| —| —| —| 2L| 2L, 7L| 200| 300| 100
2994040CG| 2-1/2| 63.5| —| —| 2| 50.8| 2L| 2L, 7L| 200| 300| 100
2994141CG| 2-9/16| 65.1| —| —| —| —| 2L| 2L, 7L| 200| 300| 100
2994848CG| 3| 76.2| —| —| 2-1/2| 63.5| 2L| 2L, 7L| 200| 300| 100
2995252CG| 3-1/4| 82.6| 3| 76.2| —| —| 2L| 2L, 7L| 200| 300| 100
2995858CG| 3-5/8| 92.1| —| —| 3| 76.2| 2L| 2L, 7L| 100| 200| 100
2996464CG| 4| 101.6| —| —| —| —| 2L| 2L, 7L| 100| 200| 100
2996666CG| 4-1/8| 104.8| —| —| 3-1/2| 88.9| 2L| 2L, 7L| 100| 200| 100

plumber’s Kit

• 29984600CGP 9 Piece
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 2-1/8″, 2-9/16″
  Arbors: 1L, 2L One arbor adaptor
  MEDIUM Kit

CONTRACTOR’S Kit

• 29985700CGK 10 Piece
  7/8″, 1″, 1-1/4″, 1-3/8″, 1-1/2″, 1-3/4″, 2-1/8″
  Arbors: 1L, 2L One arbor adaptor
  MEDIUM Kit

CARBIDE-TIPPED HOLE SAWS

Designed for Cutting Tile and Stainless Steel

LONG TOOL LIFE
Heat resistant carbide teeth for long life in tile and stainless steel

ADDED DURABILITY
Thick backing plate resists damage and increases life

UNIQUE TOOTH CONFIGURATION
Engineered design provides ability to cut in stainless steel like no other

Use standard Arbor or SNAP -BACk™ Arbor

1 per paCk| DIaMeTer| pIpe Tap| pIpe eNTraNCe| USe arbor| reCoMMeNDeD  rpM
---|---|---|---|---|---
proD No| IN| MM| IN| MM| IN| MM| snap- BaCK| STaNDarD| alUM| S T a I N l e S S STeel| fIber- GlaSS| CeraMIC T I l e| CaST

IroN

3021111CT| 11/16| 17.5| —| —| —| —| 5L| 1L ,4L, 5L| —| —| —| —| —
3021212CT| 3/4| 19.1| 1/2| 12.7| 3/8| 9.5| 5L| 1L ,4L, 5L| 1700| 410| 250| 500| 410
3021414CT| 7/8| 22.2| 3/4| 19.1| 1/2| 12.7| 5L| 1L ,4L, 5L| 1500| 180| 210| 430| 180
3021616CT| 1| 25.4| —| —| —| —| 5L| 1L ,4L, 5L| 1300| 150| 190| 370| 150
3021818CT| 1-1/8| 28.6| 1| 25.4| 3/4| 19.1| 5L| 1L ,4L, 5L| 1100| 140| 170| 330| 140
3022020CT| 1-1/4| 31.8| —| —| —| —| 2L| 2L, 3L 6L| —| —| —| —| —
3022222CT| 1-3/8| 34.9| —| —| 1| 25.4| 2L| 2L, 3L 6L| 900| 110| 140| 270| 110
3022424CT| 1-1/2| 38.1| 1-1/4| 31.8| —| —| 2L| 2L, 3L, 6L, 7L| 900| 110| 140| 270| 110
3022626CT| 1-5/8| 41.3| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3022828CT| 1-3/4| 44.5| 1-1/2| 38.1| 1-1/4| 31.8| 2L| 2L, 3L, 6L, 7L| 700| 90| 110| 210| 90
3023232CT| 2| 50.8| —| —| 1-1/2| 38.1| 2L| 2L, 3L, 6L, 7L| 600| 80| 90| 190| 80
3023434CT| 2-1/8| 54.0| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3023636CT| 2-1/4| 57.2| 2| 50.8| —| —| 2L| 2L, 3L, 6L, 7L| 600| 70| 80| 170| 70
3023838CT| 2-3/8| 60.3| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3024040CT| 2-1/2| 63.5| —| —| 2| 50.8| 2L| 2L, 3L, 6L, 7L| 500| 60| 70| 150| 60
3024141CT| 2-9/16| 65.1| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3024242CT| 2-5/8| 66.7| 2-1/2| 63.5| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3024343CT| 2-11/16| 68.3| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3024848CT| 3| 76.2| —| —| 2-1/2| 63.5| 2L| 2L, 3L, 6L, 7L| 400| 50| 60| 120| 50
3025252CT| 3-1/4| 82.6| 3| 76.2| —| —| 2L| 2L, 3L, 6L, 7L| 400| 50| 60| 120| 50
3025454CT| 3-3/8| 85.7| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3025656CT| 3-1/2| 88.9| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3025858CT| 3-5/8| 92.1| —| —| 3| 76.2| 2L| 2L, 3L, 6L, 7L| 400| 40| 50| 100| 40
3026060CT| 3-3/4| 95.3| 3-1/2| 88.9| —| —| 2L| 2L, 3L, 6L, 7L| 300| 40| 50| 100| 40
3026464CT| 4| 101.6| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3026666CT| 4-1/8| 104.8| —| —| 3-1/2| 88.9| 2L| 2L, 3L, 6L, 7L| 300| 40| 50| 90| 40
3026868CT| 4-1/4| 108.0| 4| 101.6| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3027272CT| 4-1/2| 114.3| —| —| —| —| 2L| 2L, 3L, 6L, 7L| —| —| —| —| —
3027676CT| 4-3/4| 120.7| 4-1/2| 114.3| 4| 101.6| 2L| 2L, 3L, 6L, 7L| 300| 30| 40| 80| 30
3028080CT| 5| 127.0| —           —            —            — 2L| 2L, 3L, 6L, 7L| 200| 30| 40| 80| 30
3028888CT| 5-1/2| 139.7| —           —            —            — 2L| 2L, 3L, 6L, 7L| 200| 30| 40| 70| 30
3029696CT| 6| 152.4| —           —            —            — 2L| 2L, 3L, 6L, 7L| 100| 30| 30| 60| 30

Note:
We recommend the use of a carbide tipped pilot drill when cutting ceramic tile. Pilot drill 123CT fits the SNAP-BACK 2L or standard arbors 1L, 2L, 4L or 7L. Pilot drill 65CTPD fits the SNAP-BACK 2L or standard arbors 5L and 6L.

PLUMBER’S KIT

• 30294600CTP 8 PIECE
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″
  Arbors: 1L, 2L
  MEDIUM Kit

ELECTRICIAN’S KIT

• 30294600CTP 8 PIECE
  3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″
  Arbors: 1L, 2L
  MEDIUM Kit

CONTRACTOR’S KIT

• 302901100CTG 15 Piece
  3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-9/16″, 3″. Arbors: 1L, 2L Two pilot drills
  LARGE Kit

CARBIDE HOLE CUTTERS

Designed Specifically for Sheet Metal Hole Cutting

ACCURATE, BURR-FREE HOLES
Precision ground carbide teeth for fast cutting of clean, round holes

WILL NOT DAMAGE WORK
Over-drill stopper prevents the tool from penetrating beyond the hole

STARTS ON CONTACT
Split point pilot bit for faster penetration and less walking

—
308803CHCAS| Plug ejection springs| —                               —

ELECTRICIAN’S KITS

• 30877300CHC 12 Piece kit
  7/8″, 1-1/8″, 1-3/8″. Arbors: 3L, 5L 1/4″ split point pilot bit. Plug ejection springs, 1/8″ hex wrench
  compact Kit

• 30878500CHC 15 Piece kit
  7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ Arbors: 3L, 5L. 1/4″ split point pilot bit Plug ejection springs, 1/8″ hex wrench
  medium Kit

CARBIDE GRIT RECESSED LIGHTING Hole SawS

Best for Cutting Abrasive Materials
LONG LIFE
Hard tungsten carbide grit edge for a long life in abrasive materials

FAST, EASY CUTTING
Continuous cutting edge for smooth cutting

LIMITS DUST / DEBRIS
Solid back design collects dust and debris

30861438RL            4-3/8               111             Capri, Marco, Halo, Mini-Juno 2L                                  2L
12100538RL| 5-3/8| 137| Capri, Marco, Halo, Mini-Juno, Lightolier®| 2L| 2L
30862638RL| 6-3/8| 162| Capri, Halo, Pathway & Thomas| 2L| 2L
30863658RL| 6-5/8| 168| Juno, Progress & Pathway| 2L| 2L
30864678RL| 6-7/8| 175| Capri, Hubbell®, Lightolier®, Lithonia®, Marco, Prescolite®, & Progress| 2L| 2L

Use 123CT or 1779771 Pilot Drill
HALO is a registered trademark of Halo Lighting, JUNO is a registered trademark of Juno Lighting Inc., LITHONIA is a registered trademark of Lithonia, Inc., LIGHTOLIER is a registered trademark of Lightolier, Inc., and PRESCOLITE is a registered trademark of Prescolite, Inc.

ONE TOOTH® ROUGH WOOD HOLE CUTTER

Drills Faster Than Self-Feed Bits

LONG LASTING
High speed steel tooth provides long tool life

CUTS FAST / LOW TORQUE
Designed to run at high speeds with very little torque

DURABLE WOOD CUTTING TOOL
Cuts wet, frozen, pressure treated and hard wood without binding

EASY PLUG REMOVAL
Patented design allows easy plug removal

CUTS AT AN ANGLE
Unique design provides the ability to cut at an angle

USE STANDARD Arbor or Snap-back ™ Arbor
For optimal performance use a 3/8″ Stubby Spade Bit with Standard Arbor

1 per paCk| CUTTer SIze| CUTTING DepTH| applICaTIoN| USe arbor
---|---|---|---|---
proD No| IN| MM| IN| MM| snap-BaCK STaNDarD
2542222HC            1-3/8             34.9            2-7/16″              62 1″ pipe & lock installation 2L                           2L, 3L
2543434HC| 2-1/8| 54.0| 2-7/16″| 62| 1-1/2″ pipe & lock installation| 2L| 2L, 3L
2543636HC| 2-1/4| 57.2| 2-7/16″| 62| 1-1/2″ pipe & 45°/90° bend couplings| 2L| 2L, 3L
2544141HC| 2-9/16| 65.1| 2-7/16″| 62| 2″ pipe| 2L| 2L, 3L
2544444HC| 2-3/4| 69.9| 2-7/16″| 62| 2″ pipe & 45°/90° bend couplings| 2L| 2L, 3L
2545454HC| 3-3/8| 85.7| 2-7/16″| 62| 3″ duct pipe & bendable duct pipe| 2L| 2L, 3L
2545656HC| 3-5/8| 92.1| 2-7/16″| 62| 3″ pipe| 2L| 2L, 3L
2546464HC| 4| 101.6| 2-7/16″| 62| 3″ pipe & coupling & dryer vent| 2L| 2L, 3L
2546969HC| 4-5/16| 109.5| 2-7/16″| 62| 4″ duct pipe & bendable duct pipe| 2L| 2L, 3L
2547474HC| 4-5/8| 117.5| 2-7/16″| 62| 4″ pipe| 2L| 2L, 3L
2548080HC| 5| 127.0| 2-7/16″| 62| 4″ pipe & coupling| 2L| 2L, 3L
2548787HC| 5-1/2| 139.7| 2-7/16″| 62| Toilet flange| 2L| 2L, 3L
2550000HC| 6-1/4| 158.8| 2-7/16″| 62| 6″ duct pipe| 2L| 2L, 3L
25310SB38| —| —| —| —| 3/8″ stubby spade bit| 2L| 2L, 3L
25312DIAF1| —| —| —| —| Diamond file for re-sharpening| —| —

ONE TOOTH HOLE CUTTER

• 25476301G 7 Piece
  2-1/8″, 2-9/16″, 3-5/8″ Arbor: 2L, Diamond file Two 3/8″ stubby spade bits
  large Kit

• 25477701G 11 Piece
  2-1/8″, 2-1/4″, 2-9/16″, 2-3/4″, 3-5/8″, 4″, 4-5/8″ Arbor: 2L, Diamond file Two 3/8″ stubby spade bits
  large Kit

Customer Service: 800-628-8810
Technical Support: 800-642-0010
lenoxtools.com
LENX1082
301 Chestnut Street, East Longmeadow, MA 01028-0504 USA
©2016 LENOX, Newell Brands

References

• LENOX® | Hand Tools & Power Tool Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>