INDeSIT INC18 T311 F163023 Built In Refrigerator with Freezer User Guide
- June 3, 2024
- INDESIT
Table of Contents
INDeSIT INC18 T311 F163023 Built In Refrigerator with Freezer
THANK YOU FOR BUYING AN INDESIT PRODUCT In order to receive more complete assistance, please register your product at www.indesit.com/register
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply it starts the operation automatically. The ideal storage temperatures for the food are preset in the factory After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be reached for a normally filled appliance. Position the antibacterial anti-odor filter in the fan as demonstrated in the filter packaging (if available). If the audible signal sounds, it means that the temperature alarm has intervened: press the button to switch off the acoustic alarms.
CONTROL PANEL
- Refrigerator Temperature / Freezer Temperature button
- Temperature Indicator setting
- Freezer Indicator
- Refrigerator Indicator
- Push & GO indicator
- Push & GO Button
SETTING THE TEMPERATURES
Press the button (1) for 3 seconds to choose between Refrigerator (3) and the
Freezer compartment (4). Press the same button to modify the temperature of
the zone you have previously selected.
Recommended setting for Refrigerator compartment: MED
Recommended setting for Freezer compartment: MED
- High Temp
- Med-High Temp
- Med Temp
- Med-Low Temp
- Low Temp
- Fast Cooling/Fast Freezing
PUSH &GO FUNCTION
Press the Push&Go button (6) to activate the fast temperature recovery
function to better preserve your food after a large food shopping. When
activated, the led indicator turns on (5). The function is automatically
disabled after 10 hours or can be manually disabled by pressing the Push&Go
button (6).
ON/STAND-BY FUNCTION
Press the Push & GO (6) button for 3 seconds to turn the appliance on stand-by
mode. During Stand-by mode the light inside the cavity of the refrigerator
compartment does not work. Press the Push&Go button to switch on again the
appliance.
SUPER FREEZE FUNCTION
In order to preserve at best, please use the Super Freeze function before
putting a large quantity of food in the freezer cavity. Press the button (1)
until all three LEDs are on in order to set the function. The function turns
off automatically after 26 hours, or manually by selecting different freezer
temperatures.
Note: Please avoid direct contact between the fresh food and the food already
frozen. To optimize freezing speed and get more storage space, the freezer
compartment can be used without the freezer drawers. To avoid food waste,
please refer to the recommended setting and storage found in the online user
manual.
HOW TO STORE FRESH FOOD AND BEVERAGES
Legend
MINOR COOL ZONE
Suggested for the storage of tropical fruit, cans, drinks, eggs, sauces,
pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat, and fish.
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested freezing fresh/cooked food The load limits are determined by the
particular construction (baskets, containers, flaps, drawers, shelves, etc.),
or the load limits are determined by natural load limits.
Light system (depending on model)
This product contains a light source of energy efficiency class G
This product contains a light source of energy efficiency class G
This product contains 2/4 lateral light sources of energy efficiency class F and a top light source of energy class G
This product contains a top light source of energy efficiency class G
REFRIGERATOR COMPARTMENT
Multiflow Air Distribution
The multiflow helps to distribute evenly the cold air in the cavity for better
food preservation. Foods can be placed on any shelf of the appliance. Please
pay attention to not obstruct the air distribution vents thus ensuring its
free movement.
Extra strong glass
Indesit’s extra strong glass shelves are thicker than average supporting a
staggering up to 100 kg of weight so they can hold even the heaviest of pans.
Extra load of up to 100 kg can be placed on one single shelf, where the shelf
is loaded up to a full capacity of 100 kg, this can result in the shelf itself
bowing
**Humidity control***
Turn on the humidity regulator (position B) if you want to store food in a
less humid environment, like fruit, or turn it off (position A) if you want to
store food in a more humid environment, like vegetables.
FREEZER COMPARTMENT
**Ice cubes***
Fill the ice tray with water and put it in the freezer compartment. Do not use
sharp or pointed objects to remove ice cubes from the ice tray
Easy Take Freezer Tray
Easy access zone in the freezer: easy to find and grab your favorite items.
GENERAL INFORMATION
The drawers, baskets, and shelves should be kept in their current position
unless otherwise specified in this quick guide. The light system inside the
refrigerator compartment uses LED lights, allowing for better lighting than
with traditional light bulbs, as well as for very low energy consumption. The
quantity of fresh food that can be frozen in 12 and 24 hours is written on the
rating plate.
DISPOSAL
Doors and lids of the refrigeration appliance should be removed before
disposal in the landfill, to avoid children or animals getting trapped inside.
Total No Frost system
The Total No Frost system effectively prevents ice formation, avoiding the
hassle of manual defrosting both in freezer and fridge cavity. Its ventilation
system provides perfect circulation of cold air in both cavities thus avoiding
ice builds up.
REMOVING THE DRAWERS
Pull the drawers outwards as far as they will go, lift them up and remove
them. To get more volume, the freezer compartment can be used without the
drawers. Make sure that the door is closed properly after putting the food
back on the grilles/shelves.
TROUBLESHOOTING
Available only on certain models
Policies, standard documentation, and additional product information can be found by:
- Visiting our website docs.Indesit.EU
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>