Baseus Bowie P1x Neckband Wireless Earphones User Manual

June 3, 2024
Baseus

Baseus-logo

Baseus Bowie P1x Neckband Wireless Earphones

Baseus-Bowie-P1x-Neckband-Wireless-Earphones-
product

Connection Steps

Baseus-Bowie-P1x-Neckband-Wireless-Earphones-
fig-1

  1. Power on
    Press and hold the multifunction button for 2s. The earphones automatically enter the power-on state.

  2. Wireless connection
    Turn on wireless mode on your phone to search and pair the earphones. Select device modelBaseus Bowie P1x

  3. Power off
    Press and hold the multifunction button for 4s. The earphones will turn off.

Operation Instructions

  • Music mode:
  • Play/Pause: Press the multifunction button.
  • Previous: Press and hold the Volume- button for 1.5s.
  • Next: Press and hold the Volume+ button for 1.5s.
  • Volume down: Press the Volume- button.
  • Volume up: Press the Volume+ button.
  • Switching to low latency mode: Double-press the multifunction button.
  • Activating Voice Assistant: Press the multifunction button three times.
  • Call mode:
  • Answer/Release a call: Press the multifunction button.
  • Reject a call: Press and hold the multifunction button for 2s.

Charging power indicator

Connect to the power supply to charge the earphones (the red indicator is on during charging. The blue indicator is on when the battery is fully charged). 08

Restore to default settings
Turn off the wireless on the mobile phone. Press and hold the Volume+ and Volume- buttons simultaneously for 4s. When the blue indicator blinks 3 times, the operation is successful.

Product safety information

Improper use of the product can easily cause damage to the product or may endanger personal and property safety.

  1. The battery is included in the product. Please avoid exposing your product to the sunlight, electric heater or similar overheating enviroments. Do not store the product in high temperature, strong light and strong magnetic places.
  2. Do not keep it in other harsh environments such as fire source. Intense physical actions such as knocking, throwing, trampling on and squeezing etc. shall be avoided. Do not use it in case of expansion.
  3. The ambient temperature of product is 0~45 .
  4. Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage the product or may endanger personal and property safety. Consumer shall bear for all the consequences, to which our company will not assume any legal liability.
  5. Decomposition of this product by non-professionals is strictly prohibited.
  6. Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
  7. Please use a clean cotton cloth to clean the charging contacts of earphones regularly to prevent it from failing to charge or turn on due to missing cleaning for a long time.
  8. Do not put this product in water (or washing machine). If water enters the product, let it dry naturally before using it.

Product Specifications

  • Name : Baseus Neckband Wireless Earphones
  • Model No.: Baseus Bowie P1x
  • Wireless Version : V5.3
  • Communication distance : 10m
  • Music playing time : About 25 hours (volume at 70%)
  • Battery capacity: 170mAh/0,629Wh (earphones)
  • Earphone rated input : DC5V 100mA
  • Earphone rated consumption current : 7mA
  • Fully charging time : About 1.5 hours
  • Frequency response range : 20 Hz-20 kHz
  • Charge interface: Micro-USB
  • Suitable for : Compatible with most of wireless devices

The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances.

Package Including

Baseus-Bowie-P1x-Neckband-Wireless-Earphones-
fig-3

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • ­Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver. ­
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This equipment complies with the provisions of Directive 2012/19/EU2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment. It is hereby declared that Baseus Bowie P1xa product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com

Warning
FCC ID: 2A482-P1X 2008B GB4943.1-2011 4000-712-711 www.baseus.com Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Hotline: +86-4000-712-711 Website : www.baseus.com

PB3822Z-P0A0 1000053578 /Designed by Baseus /Made in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals