bikefinder Tracker for All Bikes Electric or Non Electric User Manual

June 3, 2024
bikefinder

User Manual
bikefinder Tracker for All Bikes Electric or Non
Electric

About
This manual describes the propet use of the BikeFinder tracker and all accessories. Make sure to read this before installation and activation of the tracker. Ensure that all  arnings are read and understood before use.

Technical specifications

Product Name: biketinder Model: nror Network frequency[ 891/90031900/1900 Mhz. 2.4Ghz Satellite system: Oland GLOHASS Battery Rechargeable< 960 man Won bailee, Hardware wthdon: 142 Fineware ~don: 31/y7.1.9 Maximum Radiatkre Pomo BT 0.6etem GPRS900 29.18dBm GFIZSISICO 2/3A3dI3m
Compatibility
Mandeb” Inner diameter. • 151-19.9mm (mount Weis without adapt& • 20.0-270mm (mount track. with adapter,
![About This manual describes the propet use of the BikeFinder tracker and all accessories. Make sure to read this before installation and activation of the tracker. Ensure that all warnings are read and understood before use. Technical specifications Product Name: biketinder Model: nror Network frequency[ 891/90031900/1900 Mhz. 2.4Ghz Satellite system: Oland GLOHASS Battery Rechargeable< 960 man Won bailee, Hardware wthdon: 142 Fineware ~don: 31/y7.1.9 Maximum Radiatkre Pomo BT 0.6etem GPRS900 29.18dBm GFIZSISICO 2/3A3dI3m Compatibility Mandeb" Inner diameter. • 151-19.9mm (mount Weis without adapt& • 20.0-270mm (mount track. with adapter,](https://manuals.plus /wp-content/uploads/2022/11/bikefinder-Tracker-for-All-Bikes-Electric-or-Non- Electric-Fig-1.png) Requires BikeFinder subscription to function
Contact
Contact support through the app, or via supportaikefinder.com

Limitations and warranty

General Safety precautions

  • Do not bend tracker more than 45 degrees
  • Do not insert tools or pointy objects, other than those inculded, into USB socket or other openings in the tracker
  • Do not open or tamper with any internal components
  • Do not expose the tracker to water submersion or high-pressure water jets
  • Do not drop tracker onto hard surfaces or expose it to high-energy impacts
  • Do not charge the tracker outside of the allowed charging temperature (below 0°C or higher than 45°C)
  • Keep tracker and accessories away from high pressure places, potentially explosive atmospheres and extreme temperature conditions (below -20°C or higher than 45°C)
  • Keep away from medical electronic equipment

For full terms and conditions: www.bikefinder.com/terms
BikeFinder privacy policy www.bikefindencom/privacy
More Information and video Instructions: www.bikefindencom/manual
Getting started information: https://bikefinder.freshdesk.com

Installation

  1. Charge the tracker Remove USB cover and connect with USB cable. Connect USB cable to a power source with SV and 0.5-2A output. The tracker will need 2-15 minutes before it is ready to connect to the BikeFinder app, depending on your power source and your tracker’s battery level.bikefinder Tracker for All Bikes Electric or Non Electric - Fig

  2. Buy a subscription
    Go to www.bikefinder.com to buy your subscription.
    BikeFinder has different subscription offerings in different countries.
    Some include insurance in addition to tracking.
    If purchasing an insurance subscription, please note that the insurance policy depends on your country of residence.
    Note:Make sure you buy a subscription with the same email address you used to login to the BikeFinder app. See step 3.

  3. Downlod the App
    You can download the Bike Finder app from App Store and Google Play.
    After downloading the app, you must login with the same e-mail used when purchasing the subscription. The app will guide you through the necessary steps for activation of the tracker.bikefinder Tracker for All Bikes
Electric or Non Electric - Icon

  4. Activation of the tracker
    To activate your BikeFinder tracker, you must do the following steps:
    1 Make sure Bluetooth is activated on your phone
    2 Open the app
    3 Click the sign in the top right corner of the app Select your tracker from the list of trackers nearby
    5 After the trackers is added, the app will automatically connect it to your purchased subscription.
    When your tracker is successfully connected to a subscription, the credit card sign will turn green in your Bike Finder App.
    Inactive subscription
    Active subscription Tip: If your tracker has an inactive susbscription, check Buy a subscription step.

  5. Install the tracker
    Insert tracker into handlebar, if handlebar diameter is bigger than 20mm then see page 11 for fitting adapter and spacer.
    Mount the device and make sure that the direction arrows are pointing upwards to ensure correct installation.bikefinder Tracker for All Bikes Electric or
Non Electric - Fig 2

  6. Lock the tracker In place
    Fasten the screws using the tool. Tighten the two screws evenly until tracker is locked in place.
    Note: The expansion mechanism can damage the interior of the handlebar.
    Tip: lnsepct the fastening peroidically, and keep the tightning torque between 0.4-0.5 N · m to achieve optimal fastening result.bikefinder Tracker
for All Bikes Electric or Non Electric - Fig 4

  7. Plug in USB cover
    Plug in USB cover during normal use.
    Your tracker is now installed and ready to use.
    For troubleshooting and more information, go to www.bikefinder.com/manual
    Do not cover this area with metal. Signal strength will be affectedbikefinder Tracker for All Bikes Electric or Non Electric - Fig
5

FCC WARNING STATEMENT

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with timits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the nstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  ser s encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for he This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating conjunction with any  ther antenna or transmitter. The device is designed to meet the requirements for exposure to radio waves established by the Federal Communicaons Commission (USA). These requirements set a SAR limit of 4 W/kg averaged over one gram of ssue. The highest SAR value reported under this standard during product cercaon for use when properly worn on the Limbs is 2.612 W/kg.

CE WARNING STATEMENT

The device is designed to meet the requirements for exposure to radio waves established by the European Union. These requirements set a SAR limit of 4.0 W/kg averaged over ten gram of tissue when use in Limbs. This product was tested and recorded the maximum reported SAR value was 2.434W/kg for Limbs.

Use Member States
The radio equipment can be used in at least one of the member state.
Hereby, Bikefinder AS declares that the radio equipment is in compliance with Directive 2014/53/EU.
Please contact Support@bikefinder.com to receive full text of the EU declaration of conformity.

20mm+handelbar adapter set

Use the adapter set on handlebars with inner diameter larger than 20mm.bikefinder Tracker for All Bikes Electric or Non Electric - Fig
6

Expansion mechanism adapter installation:

  1. Remove the two expansion bolts using the screwdriver tool provided in the box
  2. Mount the two expansion adapters and reinstall the expansion bolts

Silicone spacer installation:

  • Slide the silicone spacer into the device until the spacer is located as shown to the right

Apple and the Apple logo are trademarks of Apple Inc. registrered in the U.S and other countries.
App store is a service mark of Apple Inc. registered in the U.S and other countries.
Google Play and the Google play logo are trademarks of Google Inc.
The Bluetooth word, mark and logos are registrered trademarks owned by the Bluetooth SIG. Inc. and any use of such marks by Bikefinder AS is under license.

Manufacturer
BIKEFINDER AS
Veritasveien 25, 4007 Stavanger
Postbox 4004, 4092 Stavanger
NORWAY
RoHS GPS
GLONASS GSM 960 mAh
Model: BFG1T
**FCCID:2ATRU-BFG1S
www.bikefinder.com/manual**

Documents / Resources

| bikefinder Tracker for All Bikes Electric or Non Electric [pdf] User Manual
BFG1S, 2ATRU-BFG1S, 2ATRUBFG1S, Tracker for All Bikes Electric or Non Electric, Tracker, Tracker for All Bikes Electric, Tracker for All Non Electric
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals