SPEKTRUM SPMXSE1040RX Brushed 25 Amp ESC Plus SLT Rx Combo Instruction Manual

: June 4, 2024
: SPEKTRUM

Table of Contents

Meaning of Special Language
Specifications
1-Year Limited Warranty
Warranty and Service Contact Information
**FCC Information
Documents / Resources

2-in-1 Brushed 25 Amp ESC + SLT Rx Combo
Instruction Manual

NOTICE

All instructions, warranties, and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.

Meaning of Special Language

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
NOTICE : Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.

WARNING : Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, and personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability.
Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use incompatible components, or augment the product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup, or use, in order to operate correctly and avoid damage or serious injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto.

Specifications

Continuous current	25A
Receiver Frequency	2.4G (SLT)
LiPo/NiMH Cells	2S Lipo, 6 Cells NiMH
BEC output	3A /6V (Switch Mode)
Battery Connector	IC3 (EC3 Compatible)
Motor Connectors	3.5mm Female Bullet Connectors
Weight	40g
Dimensions	36 x 25 x 15mm
Compatible Motors	380/390
Running Mode	Fwd/Rev/Br or Fwd/Rev

Features

Steering
CH3 (available if using SLT3 ™ Transmitter)
Selector for battery (LiPo or NiMH)

Components

A) ON/OFF Switch
B) +/- Battery connector, range 5-8.4V.
C) M+/M- Motor connector. Max current 25A
D) Steering servo
E) LiPo | NiMH Battery type selection
F) Running mode selection
G) LED

Factory Settings
Battery Type: LiPo
Running Mode: Fwd/Rev/Br
Binding

Make sure the vehicle is secure with vehicle wheels off the ground.
Insert the bind plug into the binding slot on the ESC/RX.
Power on the vehicle. The LED light will flash rapidly.
Power on SLT transmitter to bind to the vehicle. The LED light will stay ON when bound. If binding fails LED will turn OFF.
Once bound, remove the bind plug before operation.

Note: If using the external receiver, follow bind instructions for that product.
Alarms
Battery Mode
When powered ON:

1 beep indicates NiMH mode. (Remove the jumper to place in NiMH mode)
2 beeps indicate LiPo mode. (Lipo Mode is the default mode)

Battery Error: When powered ON and the total voltage of the LiPo cells is more than 8.8V or the total voltage of NiMH cells is more than 10.8V, the LED will flash slowly and emit a short beep. Replace the battery with a different battery that is not overcharged.
Low Voltage Warning
There are two conditions that activate the Low Voltage Warning.

When powered ON and the voltage of the battery is lower than 6V (Lipo) 5V (NiMH), the ESC does not turn ON and the LED flashes slowly. Replace the battery with a
charged battery.
During operation
LiPo
When the voltage goes below 6.6V (Lipo) for greater than 2 seconds, protection is activated to cut half the power of the motor. The LED flashes slowly for about 20
seconds after activation. If voltage does not recover, a hard cut-off will occur to stop the vehicle.
NiMH
When the battery voltage goes below 5.2V for greater than 2 seconds, protection is activated and a hard cut-off will occur to stop the vehicle.

Fail-Safe
Built-in Fail Safe feature: When the receiver stops communication with the transmitter, the ESC will stop throttle output. Steering output will maintain the latest position.

1-Year Limited Warranty

What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage,(ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation, or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations, or (vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION
OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICTLIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, the purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of law principles). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup, or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll-free telephone number referenced in the Warranty and Service Contact the Information section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant with the country you live and use the Product in, please use the Horizon Online The service Request submission process is found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking
and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/ service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge.
Service or replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition, you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content /service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging the return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Products for a period of 60 days from notification, after which they will be discarded.

Warranty and Service Contact Information

Country of Purchase| Horizon Hobby| Contact Information| Address
---|---|---|---
United States
of America| Horizon Service Center
(Repairs and Repair Requests)| servicecenter.horizonhobby.com/RequestForm/| 2904 Research Rd.
Champaign, Illinois
61822
USA
Horizon Product Support
(Product Technical Assistance)| productsupport@horizonhobby.com.
877-504-0233
Sales| websales@horizonhobby.com
800-338-4639
European Union| Horizon Technischer Service| service@horizonhobby.de| Hanskampring 9
D 22885 Barsbuttel, Germany
Sales: Horizon Hobby GmbH| +49 (0) 4121 2655 100

**FCC Information

**

Supplier’s Declaration of Conformity

2-in-1 ESC + SLT Rx Combo
(SPMXSE2025RX)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC
2904 Research Rd.,
Champaign, IL 61822
Email: compliance@horizonhobby.com
Web: HorizonHobby.com

IC Information

CAN ICES-3 (B)/NMB-3(B)
2-in-1 ESC + SLT Rx Combo
(SPMXSE2025RX)
This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following 2 conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Compliance Information for the European Union

EU Compliance Statement:
2-in-1 ESC + SLT Rx Combo
(SPMXSE2025RX) ; Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: 2014/30/EU EMC Directive; RoHS 2 Directive 2011/65/EU;
RoHS 3 Directive – Amending 2011/65/EU Annex II 2015/863.
The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/support- render-compliance.

EU Manufacturer of Record:
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA
EU Importer of Record:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany

WEEE NOTICE:
****This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this the product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. © 2021 Horizon Hobby, LLC. SLT3, EC3, IC3, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with the permission of Bachmann Industries, Inc.

Documents / Resources

| SPEKTRUM SPMXSE1040RX Brushed 25 Amp ESC Plus SLT Rx Combo [pdf] Instruction Manual
SPMXSE1040RX, Brushed 25 Amp ESC Plus SLT Rx Combo, SPMXSE1040RX Brushed 25 Amp ESC Plus SLT Rx Combo, 25 Amp ESC Plus SLT Rx Combo, ESC Plus SLT Rx Combo, SLT Rx Combo, Rx Combo, Combo
---|---