UPERFECT 15.6 Inch 4K Lapdock User Manual

UPERFECT 15.6 Inch 4K Lapdock User Manual

Checking the Package Contents

Note:

• If any of the above items is damaged or missing, please contact us immediately. PD Power Adapter User Guide
• the appearance of the components may differ from the images shown.

Monitor Introduction

Product Appearance & Interface Function Introduction

1. Pulley Button:
   Press to enter’MENU’;

2. Roll ‘up’ to quick adjust ‘brightness’;
   Roll ‘down’ to quick adjust ‘volume’;

3. Type-( OTG Port:
   Can be connected to mouse and keyboard

4. HPPort:
   3.5mm headphone jack

5. PD Port:
   Only for power supply

6. Type-C Port:
   For both signal transmission and power supply

7. Mini HDMI Port:
   Only for signal transmission

The functions of the bracket & keyboard

The keyboard is magnetic and can be directly attached to the monitor.

Specifications

Connecting

TYPE-C signal transfer

Note: 4K monitor needs higher voltage power, for a more stable power supply, it is recommended to use ouroriginal PD adapter to power.

Supported Devices & Models (Type-C)

HDMI signal transfer

Note: 4K monitor needs higher voltage power, for a more stable power supply, it is recommended to use our original PD adapterto power.

NOTE: No TOUCH & KEYBOARD function when connecting to game devices.

Note:

1. You have to use an USB A-C cable to connect for KEYBOARD & TOUCH function while you connect the lapdockto devices via mini HDMI port.
2.  lfthe Type-( port of your laptop/ phone is not full-featured orthe port of your phone is micro USB port, Lightning port, for example: Google Pixel 3, you need to buy the adapter below. In orderto enhance our customer experience, you can contact us and we will send you forfree.
3.  lfyou use an adapterto connect monitorto other devices, there will be no touch and keyboard function. However, you could also connect to the OTG port forotherbrands’ keyboard.

Setting Up(Windows10)

Extend Mode /Duplicate Mode/Display Mode

Way1: Set on the device’Display Settings
A: Verify that your cables are connected properly to the new monitors.
B: Right-click anywhere on your desktop and select Display settings to open the Display page.
C: Scroll down to Multiple displays, then select an option from the drop-down list to determine how your desktop will display across your screens. For the largest work area, select Extend desktop.

Note: If you cannot see the additional monitor(s) listed, click Detect. If does not work, try restarting your computer and do steps again.

Way2: Set via Windows key+ P keyboard shortcut

A: Verify that your cables are connected properly to the new monitors.
B: Enter the “Windows” key and “P” keyboard at the same time.
C: select an option from the drop-down list to determine how your desktop will display across your screens. For the largest work area, select Extend desktop

Note: If you cannot see the additional monitor(s) listed, click Detect. If does not work, try restarting your computer and do steps again.

How to get Keyboard & Touch fuction?

Set the Monitor As Main Screen

1. Verify that your cables are connected properly to the new monitors.
2. Right-click anywhere on your desktop and select Display settings to open the Display page.
3. Underthe “Multiple Displays” section, select the monitor that you want to adjust “Show only on 2”.
4.  Check the choice”Makethis my main display”, then the monitor screen is your main screen and you can touch.

Screen Adjustment

On-Screen Display Menu Introduction Press pulley button to enter ‘MENU’

On First OSD Menu, you can tap to choose:
Signal Source: Type-(/ Mini HDMI.
Charging logo: which means thatthe battery logo will be displayed on the screen when it is turned on when charging.
Volume.
Brightness.
ECO Mode: Standard, Movie, Game, Photo, FPS, RTS

Press forward button to the second 05D page

Tap to choose:
ContrastRatio:4: 3, 16: 9, AUTO.
HOR: OFF, 2084, AUTO.
RGB: 6500, 9300, USER.
Color Balance: Red, Green, Blue.

Press forward button to the third 05D page

Tap to choose:
Free Sync.
Reset.
Language: Chinese, English, German, French, Korean, Japanese.
Eyecare.
Mute.
Sleeping Mode: Power Saving Mode. The monitor will be off automatically without signal input.
Revese Charging to your device: ON by default.
(NOTE: If it is turned off, reconnect the Samsung phone, the desktop mode will not be activated, so please let it be on.)
3D Sound Effects: Mild change of sound.

Save settings

How to save all the settings of the monitor?
1.lf it is an HDMI signal source, the monitor settings can be directly
2.lf it is a TYPE C signal source, the monitor need to connected to an external power supply
first, then you can save the settings.

Q&A

Q: The monitor keeps switching and flicker, although it connected to outlet for extra power supply.
A: This situation is generally caused by insufficient voltage; Please check whether the factory-packed cables are used, and then check whether an external PD power supply is used. The power consumption of 4K monitor is relatively larger, and an external PD power supply is required.
Q: Can we supply energy from power bank without using self power adapter?
A: That depends on the output of the power bank, because this monitor requires at least 15W power supply.
And if the output of your power bank is only 10W, this power bank will not supply enough energy for the monitor.
The output of power adapter we provide is 30W, so a power bank with output above 30W is recommended.
Q: Is it possible to set the default contrast? I have to adjust each time from 10% to 70%, each time I connectto my Macbook Pro laptop.
A: How to save the settings of brightness, volume, etc.
-When the HDMI port is used for display and monitor powered by PD port, all the settings will be saved automatically.
·But when the Type-C port is used for display without external power supply, brightness and volume will not be saved after the monitor is powered off, this design is to avoid that the monitor doesn’t work when connected to phones which could not provide enough power for monitor with high brightness setting. So to avoid the brightness is reset everyday, please give the monitor an external power supply with “PD” port and do not cut off the power. Actually, all the portable monitors on Amazon all have this same design.
Q: Does the monitor support Free Sync function?
A: Yes, it does. Please note that this feature must be in “Game Mode” mode. Please refer to the “Introduction to OSD” in the instruction manual, and set the display to “Game” mode.
Q: The output resolution of the monitor is less than 4k 6Ohz, what is the reason?
A :

1. Check the display settings on the device and adjust the resolution to 4k;
2. Connect to another device and check if the output resolution is 4k;
3. If it still cannot be adjusted, please check whether the graphics card of the device supports 4K. If your graphics card does not support 4K, the output resolution of the monitor will also be lower than 4K;
4. If the above methods can not solve the problem, please contact us. Our professional team will give you a satisfactory answer within 12 hours.

Q: The power indicator is on, but the screen is black or the screen is fixed.
A :

1. Please use the factory-packed cables we have equipped;
2. Please check whether there have video signal transmission;
3. Check whether the monitor is in the default extended mode, please change to duplicated mode/mirror mode, and then the screen will be displayed;
4. If possible, please try to connect to another device. 4.lf the above methods can not solve the problem, please contact us. Our professional team will give you a satisfactory answer within 12 hours.

Q: Touchscreen isn’t responsive or not working.
A :

1. For mobile phones <D Touchscreen is not working when connecting to a mobile phone supporting USB3.1. Please contact us to upgrade the display program.
   Touchscreen isn’t responsive or not working if the phone doesn’t support USB3.1. Please check the phone model to ensure if it supports USB3.1.

2.  For game devices (Nintendo, XBOX, PS4, etc.), the touch-function is unresponsive.

3. For Computer/Micro-host. Please check the connection. Please use the genuine cable provided. Incorrect connection may arouse touch-function unresponsive in most cases. The following picture is an example. The left picture is the correct connection, and the right picture is the wrong connection. SPlease refer to the picture.

4. If the connection is correct and the touch-function is still unresponsive. Please try another computer. If it failed, please contact us for the replacement of the touch cable.

Service Support

Dear Customer,
Thank you for purchasing the Portable USB Monitor!
We otter100% money back guarantee in 30 days and 90 days replacement, 12 months warranty for any issue, professional tech support to ensure no-worry service. Any query or problem, please contact us via

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>