LINDY USB 3.0 to SATA Converter User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY USB 3.0 to SATA Converter
Safety Instructions
Please read the following safety information carefully and always keep this
document with
the product.
Failure to follow these precautions can result in serious injuries or death
from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which
may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing into
a power socket.
To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
To connect the adapter
Slide the desired plug adapter into the power supply and rotate clockwise
until it locks into place.
To remove the adapter
Press the push button latch.
While pressed, rotate the adapter anticlockwise.
Introduction
Thank you for purchasing the Lindy USB 3.0 to SATA Converter. This product has
been designed to provide trouble free, reliable operation. It benefits from
both a LINDY 2 year warranty and free lifetime technical support. To ensure
correct use, please read this manual carefully and retain it for future
reference.
This versatile converter allows you to connect your SATA disk drives to your
computer´s USB Type A port without the need for dedicated drive housing.
Package Contents
- LINDY USB 3.0 to SATA Converter
- Multi-Country Power Supply DC12V 2A
- This manual
Features
- USB 3.2 / 3.1 Gen 1 / USB 3.0 Standard (5Gbps)
- USB Type A connector
- Compliant to SATA Specification Rev. 3.0
- Supports 2.5”, 3.5” and 5.25” SATA drives
- Power Socket (DC 5.5mm/2.1mm)
- Compatible with USB Type A equipped computers
Installation
Connect your SATA drive to the USB 3.0 to SATA Converter.
Next connect the USB Converter to an available USB Type A port on your
computer. Your computer will recognize the new hardware and install any
required drivers automatically.
For hard drives with high power requirement a power supply might be necessary.
The USB 3.0 to SATA Converter provides a 12V DC power socket for this
purpose. A suitable 12V DC 2A Multi-Country Power Supply is included.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>