makemate BKM200 Digital TV Headphones User Guide

makemate BKM200 Digital TV Headphones

Included Items

1. 1x Bluetooth Headphone
2. 1x Bluetooth Transmitter
3. 1xUSB Android cable
4. 1x USB Type-C cable
5. 1x 3.5mm-3.5mm audio cable
6. 1x RCA audio cable
7. 1x Coaxial cable
8. 1x Optical Digital cable
9. 1x Charger

Charging

Headphone is charging via USB cable, when finished, LED indicator light will be changed from red (Long bright) to blue (Long bright).

• Charging time: when charge it for the first time, it should be more than 4 hours and less than 8 hours, to activate the best use of the battery, and after that, each charging only needs 2-3 hours.
• Low battery: flashing a red light once from each 5 seconds, alarming once for each 5 minutes and accompanied by a “Battery Low” voice prompt.
• Please disconnect the USB cable when the headset is fully charged, since overcharge will shorten the battery life.

Check your Device’s Output Ports

Connection and Use

Following Hookup: A
You need:

You need to setup after hookup:

1. Get to wall charger and Power on
   Get power to the transmitter with a wall charger, then turn on the headset (press 3 seconds).
   Note: Please don’t get power to it with USB cable directly, may cause noise sound when using to watch TV.

2. Auto connect
   Wait several seconds, blue light on the transmitter stays solid and a slow blue light on the headset. They are paired.

3. Play
   Turn on TV and play sound,enjoy it.

4. IF not paired

One: Please double-click the pair button on the transmitter. Normally, it will pair successfully.
Two: IF still not paired, please make sure other Bluetooth devices nearby are turned off, then turn off the headphone wait 3 seconds, turn it on, do the upper steps from 1-3 again.

IPTV doesn’t output sound, please adjust your TV setting, refer to “5. TV SETTING
NOTE: If you still cannot receive audio on the headphones while at the same time hearing audio from the television speakers, please connect the transmitter to Cable Box / Satellite Box.

Following Hookup: B
You need:

You need to setup after hookup:

1. Get to wall charger and Power on
   Get power to the transmitter with a wall charger, then turn on the headset (press 3 seconds).
   Note: Please don’ t get power to it with USB cable directly, may cause noise sound when using to watch TV.

2. Auto connect
   Wait several seconds, blue light on the transmitter stays solid and a slow blue light on the headset. They are paired.

3. Play
   Turn on TV and play sound,enjoy it.

4. IF not paired

• One: Please double-click the pair button on the transmitter. Normally, it will pair successfully.
• Two: IF still not paired, please make sure other Bluetooth devices nearby are turned off, then turn off the headphone wait 3 seconds, turn it on, do the upper steps from 1-3 again.

If TV doesn’t output sound, please adjust your TV setting, refer to “5. TV SETTING”
NOTE: If you still cannot receive audio on the headphones while at the same time hearing audio from the television speakers, please connect the transmitter to Cable Box/ Satellite Box.

Following Hookup: C
You need:
You need to setup after hookup:

1. Get to wall charger and Power on
   Get power to the transmitter with a wall charger, then turn on the headset (press 3 seconds).
   Note: Please don’ t get power to it with USB cable directly, may cause noise sound when using to watch TV.

2. Auto connect
   Wait several seconds, blue light on the transmitter stays solid and a slow blue light on the headset. They are paired.

3. Play
   Turn on TV and play sound,enjoy it.

4. IF not paired

• One: Please double-click the pair button on the transmitter. Normally, it will pair successfully.
• Two: IF still not paired, please make sure other Bluetooth devices nearby are turned off, then turn off the headphones wait 3 seconds, turn it on, do the upper steps from 1-3 again.

If TV doesn’ t output sound, please adjust your TV setting, refer to “5. TV SETTING”
NOTE: If you still cannot receive audio on the headphones while at the same time hearing audio from the television speakers, please connect the transmitter to Cable Box/ Satellite Box.

Following Hookup: D
You need:
You need to setup after hookup:

1. Get to wall charger and Power on
   Get power to the transmitter with a wall charger, then turn on the headset (press 3 seconds).
   Note: Please don’ t get power to it with USB cable directly, may cause noise sound when using to watch TV.

2. Auto connect
   Wait several seconds, blue light on the transmitter stays solid and a slow blue light on the headset. They are paired.

3. Play
   Turn on TV and play sound,enjoy it.

4. IF not paired

• One: Please double click the pair button on the transmitter. Normally, it will pair successfully.
• Two: IF still not paired, please make sure other Bluetooth devices nearby are turned off, then turn off the headphone wait 3 seconds, turn it on, do the upper steps from 1-3 again.

If TV does’t output sound, please adjust your TV setting, refer to “5. TV SETTING”
NOTE: If you still cannot receive audio on the headphones while at the same time hearing audio from the television speakers, please connect the transmitter to Cable Box/ Satellite Box.

TV Setting

NOTE: Other TVs are similar to the settings. Or contact your TV manufacturer for more details.

SONY TV:

SAMSUNG TV:

LG TV:

If doesn’t Work with the optical connection, Please try below:

1. connect the transmitter to your phone with 3.5mm aux cable, and make sure the headphone works.
2. Make sure the blue light on the transmitter is on.
3. The plastic caps need to be removed.
4. Make sure the optical cable connects correctly to your TV.
5. Do not tie it up and fold it into 90 degrees, since Optical cable is made of glass and plastic.
6. Ensure your TV audio format is set to “PCM/LPCM and TV audio OUT setting to “External Speakers.

Release Headphones Pressure

If too tight on your head, the headset strap which is made of stainless steel can be straightened to relieve pressure.

Technical Specifications

BKM200 Headphones Specification

Transmitter Specification

LED Indicator

BKM200 Headphones LED Indicator

FCC ID: 2AHTV-BKM200
15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

1-Year Full Warranty

If the product fails to work, it will be replaced at no fee. Please e-mail us: at [email protected]
We will reply you within 1 working days.

BKM200 YouTube Video

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1b of the Fuu Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions may cause harmful interterence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>