niceboy ORBIS Bridge Smart Sensor User Manual

niceboy ORBIS Bridge Smart Sensor

PRODUCT INTRODUCTION

Niceboy ION ORBIS Bridge is a smart home control center, which connects Zigbee 3.0 and Bluetooth devices to Wi-Fi network. Users can design and implement smart application scenarios by adding ZigBee devices.

OVERVIEW

1. WIFI indicator light
2. Status indicator light
3. Reset button
4. Micro USB socket

WIFI INDICATOR LIGHT (RED LIGHT)

• Steady on Successful connection
• Blinks Ready for connection
• Steady off Successful configuration but the network is disconneted

STATUS INDICATOR (BLUE LIGHT)

• Steady on Activate, not connected
• Blinks Pairing mode, ready to connect
• Steady off Connected

QUICK SETUP

1. Plug the hub into the socket and wait until red and blue indicator lights turn on. Make sure your mobile Phone is connected with 2.4 GHz Wi-Fi network and that Bluetooth is on.
2. Hold the reset button for 5 seconds until the status indicator light (blue light) starts flashing rapidly. If the blue light wont start flashing rapidly, press once the reset button and then hold the reset button for 5s.
3. Open the Niceboy ION app and then tap “+” in the top right corner to enter “Add Device page“. The app will find the Bridge automatically. If not, select “Sensors”, then click on „Bridge“. Confirm that you reseted the device and that its blinking rapidly (step 2). The app will start looking for a new device. Once the device is found, just add it to the app.

INSTALLATION

1. To ensure steady communication between the hub and its accessories, it is recommended to install the hub at the center of the area where the accessories are located.
2. Depending on the local environment, the indoor transmission distance reaches up to 90 meters between the hub and bridge accessories without barriers, such as walls.

WARNINGS

• This product is NOT a toy. Please keep children away from this product.
• This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
• Beware of moisture, do NOT spill water or other liquids onto the product.
• Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
• Do NOT attempt to repair this product by yourself.
• All repairs should be performed by an authorized professional.
• This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for home, building, warehouse or any other places.
• If a user violates the product use instructions, the manufacturer will NOT be liable for any.

SPECIFICATIONS

• Model: ORBIS Bridge
• Dimensions: 60 x 60 x 15 mm
• Wireless Protocol: Wi-Fi IEEE 802.11 b/g/n (2412-2472 MHz), Zigbee 3.0 (2405-2483,5 MHz), Bluetooth 5.0 (2,4 GHz)
• Input: 100—240V~, 50/60Hz, 1A 5V
• Operating Temperature: -10° – +50°C
• Operating Humidity: 10 – 90% RH, no condensation
• Maximum Transmit Power (Zigbee): 9.99 dBm
• Working Frequency: 2400 MHz – 2483.5 MHz
• Packing list: Sensor unit, magnet unit, 3M sticker, manual
• MESH Support: YES
• Maximum devices: 128
• Range without barriers: up to 90 meters

RTB Media s.r.o. hereby declares that the type of radio equipment ORBIS Bridge sensor complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/cs/podpora/ prohlaseni-o-shodemM38CtmYvX693lHvvu4CWpk3vJGrvnC

DISPOSAL

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)
This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given outto anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices. (Business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller. Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.

MANUFACTURER:
RTB media s.r.o., 5. kvetna 1746/22, Nusle, 140 00, Praha 4, Czech Republic,
ID: 294 16 876.
Made in China

References

• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>