niceboy PARTY BOY 2 100W Speaker User Manual

PARTY BOY 2 100W
User Manual / Party Speaker

PRODUCT DESCRIPTION

1. Speaker on / off / mode change
2. Microphone/guitar control switch
3. Microphone/guitar volume control
4. Microphone ECHO effect control
5. Decrease volume / Previous song
6. Play / Pause
7. Increase volume / Next song
8. Equalizer for microphone bass
9. Equalizer for microphone treble
10. Bass boost button
11. Multisession button
12. Lighting control
13. Bluetooth button
14.  6.3mm input for guitar or another musical instrument
15. 6,3mm input for microphone
16. Speaker reset
17. 3,5mm input for AUX cable.
18. USB disc input / powerbank output
19. Micro SD card slot
20. USB-C input for speaker charging

CHARGING
We recommend that you fully charge the speaker before using it for the first time to maximize battery life. It takes approximately 6 hours to charge fully. To charge the loudspeaker battery, connect the supplied USB-C cable to the charging port (20) and connect it to any charging adapter (5V voltage and at least 2A output current) or a USB in a PC. The progress of charging is indicated by a red LED next to the charging port. When fully charged, the diode turns off. While in standby mode, an acoustic signal will indicate a low battery.
Note: Use a quality adapter to charge the speaker. We recommend using the 5V 2A adapter specification.
POWER ON / OFF
To turn on/off the speaker, press the turn on/off button (1) for approximately 3 seconds. Each time you turn the speaker on, the volume will be set to approximately 50%. The speaker is always in Bluetooth mode after being switched on.
Note: When turned off and on again, the speaker remains at the previous volume and light mode settings and will automatically connect to the last paired device. To reset the speaker, read the FACTORY SETTINGS section.

BLUETOOTH MODE

1. The speaker is automatically set to Bluetooth mode after being switched on. If the speaker is in a different mode, it is necessary to actívate the Bluetooth mode by briefly pressing the (1) button. The Bluetooth pairing mode is indicated on display by a flashing Bluetooth symbol.

2. Activate Bluetooth on your device. Select “Niceboy PARTY Boy 2 100W” in the list of available devices.

3. The device will connect to the loudspeaker. The device will connect to the loudspeaker. An acoustic prompt announces a successful pairing, and the Bluetooth symbol is permanently lit on the display.

4. After switching it on again, the speaker automatically connects to the last paired device.
   To disconnect from the paired device, press and hold the button (6).

5. Use your paired device or speaker buttons (5) (6) (7) to play music.

Note:
You can connect two devices to the speaker simultaneously. The speaker is inactive during phone calls. Use a connected device to make the call. To clear the memory of previously connected devices, press and hold (1) and (6) at the same time.
PLAYBACK
To start or pause a track, briefly press the button (6). To control the volume, briefly press buttons (5) and (7). Press and hold buttons (5) and (7) to skip to the next or previous track.

AUX MODE

1. Insert the 3.5mm jack cable into the audio input (17), and the speaker will automatically switch to the appropriate mode. This is announced by an acoustic prompt and „AUX“ will light up on the display.
2. Use the device to which you have connected the speaker to control the music being played. To control the speaker‘s volume, press and hold buttons (5) and (7). Press the button (6) to either mute or amplify the speaker – MUTE mode.

TWS FUNCTION

1. Turn Bluetooth off on your device.
2. Turn both speakers on and press and hold the Bluetooth button (13) on both speakers.
3. After a successful connection, the letter A will light up on the LED screen of the primary speaker, and a letter B will light up on the secondary speaker.
4. Activate Bluetooth on your device. Select “Niceboy PARTY Boy 2 100W” in the list of available devices.
   The device will connect to speaker A. A successful pairing is announced by an acoustic prompt. The music will then play from both speakers simultaneously in stereo.
   To disconnect the speakers, press the Bluetooth button (13) on either of the two speakers.

BASS BOOST BUTTON
Press button (10) to switch between two sound modes – standard and boost.
Note:
In the active BASS BOOST mode, it is necessary to take into account the higher energy consumption.
USB MODE
Insert a USB flash drive into the USB slot (18), and the speaker will automatically switch to the appropria- te mode. This is announced by an acoustic prompt, and „USB“ will light up on display. To start or pause a track, briefly press the button (6). To control the volume, briefly press buttons (5) and (7). Press and hold buttons (5) and (7) to skip to the next or previous track.
Note:
File format support: MP3 / WAV / WMA / FLAC. The maximum capacity of the flash drive is 256GB.
MICRO SD CARD MODE
Insert the micro SD card into the slot (19), and the speaker will automatically switch to the appropriate mode. This is announced by an acoustic prompt, and „TF“ will light up on display. To start or pause a track, briefly press the button (6). To control the volume, briefly press buttons (5) and (7). Press and hold buttons (5) and (7) to skip to the next or previous track.
Note: File format support: MP3 / WAV / WMA / FLAC. The maximum capacity of the card is 64GB.
ILLUMINATION MODES
Briefly press the button (12) to switch between 4 rotating illumination settings or to switch them off.
Press and hold (12) to activate the monochrome mode. You can switch between the individual colours by briefly pressing the same button. Press and hold the same button to deactivate the mode.
MICROPHONE AND INSTRUMENTS
The speaker must be turned off before connecting a microphone or musical instrument. Switch the supplied microphone to the ON position. Connect a microphone to the input (15), guitar, or another instrument to the input (14), and turn the speaker on. Use the (3) button to control the microphone and instrument volume and the (2) button to switch between the microphone and instrument controls. Use the (4) button to control the ECHO effect for the microphone.
NICEBOY MULTISESSION MODE
Up to 98 other speakers can be connected to the Niceboy PARTY BOY 2 100W speaker.

1. Switch the speaker on and activate Bluetooth on your device. Select “Niceboy PARTY Boy 2 100W” in the list of available devices.
2. Press and hold the Multisession button (11); the letter A will appear on display.
3. Switch the second speaker on, then press and hold the Multisession button (11).  The letter B will appear on display and both speakers will connect successfully. If you want to connect a third speaker or more, repeat step 3.
   To disconnect the speaker, press the Multisession button (11).

POWERBANK FUNCTIONS
To charge your device, connect the USB-A cable to the USB port (18). The output voltage of the port is 5V, and the current is 2A.
FACTORY SETTINGS
In the event of technical problems, reset the speaker to the factory settings. Speaker must be turned on. Insert any narrow object (needle, pin) into the reset opening (16). The speaker will automatically turn itself off. When you turn the speaker manually on again, the process is completed.
PACKAGE CONTENTS
Niceboy PARTY BOY 2 100W speaker
USB-C charging cable
3.5 mm jack audio cable
Microphone
User manual

PARAMETERS

BT version:
Frequency band:
Radio frequency power:
BT profiles:
System power:
Power voltage:
Converters:
Frequency range:
Built-in battery:
Charging time until charged:
Battery life:
Degree of protection:
Dimensions:| 5.1 + EDR
2.4GHz
≤ 2,5mW
A2DP, AVRCP, HFP, HID, AVCTP, AVDTP, SPP
100W
DC 5V 2A
6.5” 4Ω woofer + 2 1.75” 6Ω tweeter
40 Hz – 20 KHz
5200 mAh
6 hours
20 hours at 50% power consumption
IPX4
356 268 * 265 mm
---|---

SAFETY INFORMATION

Listening to music at excessive volume can damage your hearing. Do not subject the equipment to fluids and moisture. Do not expose the device to excessively high/low temperatures, and do not attemptto disassemble it. Protect the device from sharp objects and falls from height. Batteries – Improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage. The battery or accumulator that may be included with the product has a life of
six months because it is a consumable item. This product complies with all the basic requirements of relevant EU directives.
Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.
RTB Media s.r.o. hereby declares that the type of radio equipment NICEBOY PARTY BOY 2 100W complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites:
https://niceboy.eu/cs/podpora/prohlaseni-o-shode- mM38CtmYvX693lHvvu4CWpk3vJGrvnC
USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)
This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the  ommunal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices.
(Business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

MANUFACTURER: RTB media s.r.o., 5. Kvetna 1746/22,
Nusle, 140 00, Czech Republic, ID: 294 16 876,
Made in China.

References

• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>