TEN TRONICS TTBT014 In-Wall CSR Bluetooth v5.0 Music Receiver Instruction Manual
- June 3, 2024
- Ten Tronics
Table of Contents
TEN TRONICS TTBT014 In-Wall CSR Bluetooth v5.0 Music Receiver
Features & Specifications
- Compact size wall plate design.
- Easy installation.
- Bluetooth version : 5.0 with apt-X
- Audio Inputs : Bluetooth receiver or stereo audio line level.
- Audio priority : Bluetooth >Aux In
- AUX IN_1 (Front) mixed with AUX IN_2(Back)
- Audio outputs : Stereo audio phone jack(Unbalanced) & 5-pin screw terminal(Balanced)
- Bluetooth receive distance : 30 Meters (open space)
- Power source : 5VDC/1A
Bluetooth Blue LED Status:
LED state| All profiles are standby but not connected with any Bluetooth
device yet.
---|---
Blue led on : 1 sec , off : 2 sec , repeat| A2DP or HFP is connected.
Blue led flash every 2 sec| On A2DP streaming state
Blue led On: 150ms, Off: 150ms repeat| Enter pairing mode.
Set Up
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a parcular
installaon.
If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2ACIA-TTBT014
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>