Ten Tronics WiFi Audio Receiver User Manual

WiFi Audio Receiver
User Manual

Introduction

This wireless audio streamer is of great performance and especially designed to meet the high demand of the installation market. This system uses free iOS and Android  applications to easily control the audio system. You can steam the same music to all zones or different music to different zones, no matter the music from call phone memory or online steaming services such as Spotify.

Content

• Wifi Audio Receiver
• 3.5mm audio cable
• USB Cable
• USB Power Adapter (5V, 1A)

Interface and Function

1. SPDIF : Audio Source Input for Digital Audio
2. AUX IN : Audio Source Input for 3.5mm Audio Cable
3. AUX OUT : Audio Source Output for 3.5 Audio Cable
4. DC 5V : For Power
5. LAN : For Network Router
6. WPS : Press to activate WPS, long press for factory reset
7. Indicator Link Status Light:
   a. No Light: Unit powered off or connected to line in input
   b. Blue flashing: Startup mode, searching for network
   c. Green flashing: In the process of connecting to internet
   d. Solid Green: Connected to internet and ready for use

Installation Guide

1. Unpack
   Verify all the accessories are included in the package.

2. Place
   Fix the amplifier at a safe and proper location.
   Note: The antenna should not be attached to metal and kept away from metal materials.

3. Connect
   -Power connection
   Power the amplifier with the power adaptor included in the accessories.
   -Audio connection
   Use the terminal provided by the product to connect speakers.

4. Download the APP
   Download the application (4STREAM or MUZO Player) from the App Store for iOS and Google Play for Android.
   

Configure

1. Connect your mobile device to your network.

2. Power the device.

3. After waiting for the blue light of the device to flash slowly, choose the hotspot (SoundSystem_xxxx) in the WiFi setting on your cell phone and connect.

4. Open the application (4STREAM or MUZO Player).

5. Application will search for the device. After the device is found, click the connect button in the app.
   

6. Choose the network you want the device to use (Only supports 2.4G networks), click continue.

7. Wait for the device to be configured.
   

Application Playback

Your device list will show all available zones. Press a zone to see the information on the current source. While on the view for the source, swipe right to reveal the available  sources. From there, you can select what source you want to hear next, or swipe left to return to the currently playing source. 

Streaming from cell phone memory/online Music Services：
These screens let you access your available music.

Device Settings

Through device settings you can get technical informtion on your speaker, or rename it.
(Note – Speaker info can confirm the firmware version.)

-Rename

1. Click “Gear” icon.
2. Click “Rename”.
3. Click “Custom…”.
4. Enter new name of the device and Click “Confirm”.
5. Click “Finish”, Complete the Rename.
   (Note – If there is an updated name and then initialize the device, the SSID will be changed to the last custom name plus the serial number of the product.)
   Firmware update
   Device will notify in your application when there is a new firmware version available. It’s recommended to update firmware whenever available as this might not only correct  bugs improve security.
   -Update process
6. Click “NEW” icon.
7. Click “Upgrade”.
8. Don’t turn off the power, the device will update automatically. (Note – Speaker info can confirm the firmware version.)
   

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates,  uses and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body:  Use only the supplied antenna.
FCC ID: 2ACIA-TTBT015
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment

Device Specification

Analog : 3.5mm mini Jack
Protocol| AirPlay, DLNA,Spotify Connect
THD+N| -86 dB
Dynamic range| 105 dB
SNR| 105 dB
Sample Rate| 24 bits / 48KHz
Dimensions| 118mm87mm25mm
Weight| 121g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>