Ten Tronics Bluetooth Adapter In-Wall CSR Bluetooth v5.0 Music Receiver User Manual
- June 5, 2024
- Ten Tronics
Table of Contents
In-Wall CSR Bluetooth v5.0 Music Receiver
User Manual
Specifications & Features
- Audio Inputs: Bluetooth receiver or stereo audio line level.
- Audio source select: Source is an auto switch, the priority is BT first when playing.
- Audio output: Stereo audio phone jack or 3-pin Screw terminal.
- Power input(5VDC): Power jack or 3-pin Screw terminal.
- Stereo audio output: For connection to any speaker system.
- Bluetooth version: v5.0.
- Bluetooth receives Distance:10 Meters.
- Power source:5VDC/1A
Bluetooth Blue LED Status :
- Pairing mode: 1s on/off(0.5ms/0.5ms) flash 1 times
- Linked mode: Always on
- Connectable mode: 5s on/off(0.5ms/4.5ms) flash 1 times
How about using the button to pair:
- Press the button 3 seconds to boot, press the button 3 seconds to off.
- For the first pairing, hold down the button for 5 seconds to make the Bluetooth pairing boot.
- The pairing timeout limit is 90 seconds.
- If pairing timeout, you need to hold down the button for 1 second to re-pairing.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
RF Exposure Statement:
For the product, under normal use conditions is at least 20cm away from the
body of the user,the user must keep at least 20 cm distance from the product.
Back View
Setup Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>