ENERGY SISTEM Earphones Eco True Wireless Beech Wood Headset User Manual
- June 4, 2024
- ENERGY SISTEM
Table of Contents
Earphones Eco True Wireless Beech Wood Headset
User Manual
Introduction
Thank you for trusting our company and buying the new Earphones Eco True Wireless Beech Wood. We hope you enjoy the product.
Care and maintenance
- Do not expose your Earphone’s Eco True Wireless Beech Wood to impacts, dust, humidity, or high temperatures.
- Use neither corrosive nor abrasive cleaning products.
- Do not dismantle the device. All repair works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
- Please make sure your Earphones Eco True Wireless Beech Wood are off when you are not using them. Do not store them with an empty battery for long periods of time.
Warning
Hearing Health
Listening to loud music can cause irreversible hearing loss. To avoid
hearing damage, we recommend the following guidelines:
- Do not listen to loud music for long periods of time.
- Turn the volume down on the source device before using the headphones, then gradually increase the volume to a safe volume level.
Safety
For safety reasons and to avoid possible accidents, we recommend the following
safety measures:
- Do not use the headphones while driving or carrying out any other activity that requires special attention.
- Keep the product, packaging, and accessories out of the reach of children and pets to avoid accidents and choking hazards.
Technical specifications
AUDIO
- Frequency response: 20 Hz ~ 20 kHz
- Driver diameter: 6 mm
- Maximum power: 5 mW
- In-ear design
- Type: Dynamic
CONNECTIVITY
- Bluetooth 5.1
- Frequency band: 2.4 GHz
- Maximum output power: < 20.00 dBm
- Compatible Bluetooth profiles: HFP / A2DP / AVRCP / AVCTP
- Up to 20 m distance range
- True Wireless Stereo function
MICROPHONE
- Type: built-in microphone
- Sensitivity: -42 dB ± 3 dB (@1 kHz)
- Hands-free function
- Voice assistant compatible with Google/Siri
BATTERY
Earbuds:
- Capacity: 50 mAh (each earbud)
- Type: lithium polymer
- Battery life: up to 8 hours*
- Charging time: 1 hour
- Charging method: charging case
Charging case:
- Capacity: 230 mAh
- Type: lithium polymer.
- Extra battery life: 12 hours
- Charging method: USB Type-C cable or wireless charging dock
- Charging time (with cable): 1 hour
- Charging time using a wireless charging dock: 1 hour
*This value is approximate. The battery life depends on the selected volume and the type of music.
Product content
- Earphones Eco True Wireless Beech Wood
- Charging case
- Set of ear tips
- USB Type-C charging cable
- Pouch
Important: We recommend trying out the provided ear tips in different sizes to choose the ones that fit your ears best. Using ear tips that don?t fit correctly may have an impact on the perceived sound quality.
General overview
- Left touch button
- Right touch button
- Earbud indicator
- Charging port
- Charging case indicator
Switching on and off the device
To switch on your Earphones Eco True Wireless Beech Wood, simply take them out
of the charging case or tap and hold the Right and Left touch buttons (1 and
2) for 10 seconds. At this point, the Indicator (3) on both earbuds flashes and
they pair automatically. When the Indicator (3) on one earbud flashes quickly,
you can pair your earphones with a Bluetooth music player. To switch off your
Earphones Eco True Wireless Beech Wood, put them back in the charging case or
tap and hold the Right and Left touch buttons (1 and 2) for 4 seconds. The
earbuds will charge automatically when you put them back in the charging case.
Bluetooth pairing
Remove both earbuds from the charging case. Select Earphones Eco True Wireless
Beech Wood from the list of Bluetooth devices on your smartphone or Bluetooth
music player. Both devices will be connected immediately and without codes.
You will hear a confirmation sound when both devices are paired. At this point,
the Indicator (3) on both earbuds turns white and blinks slowly. If you
previously paired the earbuds with a device, there is no need to repeat the
pairing process again. Just enable Bluetooth on your music player and switch
on your Earphones Eco True Wireless Beech Wood. They will sync with it
automatically.
Note: To optimize battery life, your Earphones Eco True Wireless Beech
Wood turn off automatically after 5 minutes in search mode, if not synchronized
with any other device.
Playback control
Play/Pause
Double tap the Right touch button (1) or Left touch button (2) to pause music
or resume playback.
Volume +/Volume –
Tap the Right touch button (1) to turn up the volume or the Left touch button
(2) to turn it down.
Skipping to the next or previous track
Tap and hold the Right touch button (1) for 2 seconds to skip to the next
track or the Left touch button (2) to switch to the previous song during music
playback.
Answering/Ending a call
To answer an incoming call or hang up, tap the Right or Left touch button (1)
or (2) once.
Rejecting an incoming call
To reject an incoming call, tap and hold the Right or Left touch button (1) or
(2) for 2 seconds.
Using the Voice Assistant feature
You can interact with your smartphone voice assistant using your Earphones Eco
True Wireless Beech Wood. To do so, tap the Left touch button (2) three times
in a row. You can give the voice command after hearing the confirmation sound.
Charging the battery
Earphones
When the battery level of your Earphones Eco True Wireless Beech Wood is
below 5%, you will hear a low battery warning sound. To charge the battery,
put the earbuds in the charging case. The Charging case indicator (5) flashes
white while charging the earphones. It will turn off once the charging process
is complete.
Charging case
When the charging case battery level is below 10%, the Charging case indicator
(5) flashes red. There are 2 ways of charging the battery:
Using a cable
Plug the USB Type-C end of the provided cable into the Charging port (4).
Connect the other cable end to a 5 V / 1 A or5 V / 2 A USB charging port. The
Charging case indicator (5) glows red while charging the case. It will switch
off once the charging process is complete. The charging time is approximately 1
hour.
Using a wireless charging dock
Place the charging case on a wireless charging dock (not provided with the
product). The Charging case indicator (5) glows red while charging the case.
The indicator will switch ff once the charging process is complete. The
charging time is approximately 1 hour. We recommend using a 5 V / 2 A charging
dock.
Important: We recommend not leaving either your Earphones Eco True Wireless
Beech Wood nor the charging case unused for long periods of time with an empty
battery. We advise charging the battery at least once a month.
Restoring factory settings
To reset the device to factory settings, follow the steps below:
- Put the earbuds in the charging case.
- Leave the case lid open and tap the top of both earbuds with your forefingers 6 times in a row.
- Repeat the steps in ? Bluetooth pairing? to pair the earphones with your smartphone or Bluetooth source device.
Warranty
You can check the warranty terms here: https://www.energysistem.com/terms-
warranty
CE Declaration of conformity
Issuer’s name: Energy Sistem Technology, S.A. – CIF: A53107488
Address: C/ Calpe, 1 – 03509 Finestrat, Alicante (Spain)
Tel: + 34 966 830 324
We declare under our sole and exclusive responsibility that the product:
Description: wireless earphones
Brand: Energy Sistem
Model: Earphones Eco True Wireless Beech Wood
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration complies with the essential norms and
standards:
EN 50663:2017
EN 62368-1:2019
EN 301 489-1 V2.2.3 (2019-11)
EN 301 489-17 V3.2.0 (2017-03)
EN 300 328 V2.2.2 (2019-07)
in conformity with the provisions of Directive 2014/53/EU of the European
Parliament and of the Council of 16th April 2014.
Finestrat, 1st May 2021
Miguel Ángel Aragüez García
Innovation and Technology Director
UKCA Declaration of conformity
Issuer’s name: Energy Sistem Technology, S.A. – CIF: A53107488
Address: C/ Calpe, 1 – 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
We declare under our sole and exclusive responsibility that the product:
Description: Bluetooth earphones
Brand: Energy Sistem
Model: Earphones Eco Bluetooth Beech Wood
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration is in compliance with the essential norms
and standards:
BS EN 50663:2017
BS EN IEC 62368-1:2020
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 300 328 V2.2.2 (2019-07)
in conformity with the provisions of the Directive UK: Radio equipment
Regulations 2017.
Finestrat, 1st May 2021
Miguel Ángel Aragüez García
Innovation and Technology Director
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>