ENERGY SISTEM Pop Kids Headphones User Manual

: June 3, 2024
: ENERGY SISTEM

ENERGY SISTEM Pop Kids Headphones

Pop Kids Headphones

Introduction

Thank you for trusting our company and buying your new Lol&Roll Pop Kids Bluetooth Headphones. We hope you enjoy the product.
Kids’ headphones with Bluetooth 5.1 technology for wireless fun. Maximum hearing protection with 85 dB volume limitation. Connect two headphones with the “Music Share” function to share music and series.
Removable cable and microphone.

Care and maintenance

Do not expose your Lol& Roll Sonic Kids Bluetooth Headphones to humidity or high temperatures.
Do not use neither corrosive nor abrasive cleaning products.
Do not disassemble your headphones. All repair works should be carried out exclusively by qualified staff of Energy System Technology, S.A.

Technical specifications

AUDIO

Frequency response: 20 Hz ~ 20 kHz
Driver diameter: 30 mm
SPL: 85 ± 3 dB
Type: dynamic
On-ear design
Impedance: 32 ohms
Limited to 85 dB to protect hearing. MICROPHONE
- Sensitivity: -42 dB ± 3 dB

CONNECTIVITY

Bluetooth® 5.1 technology
Frequency band: 2.4 GHz
Maximum output power: < 20.00 dBm
Compatible Bluetooth profiles: HFP / A2DP
Compatible with SBC codecs
Up to 20 m distance range
Hands-free function
Voice assistant compatible with Google / Siri

AUDIO INPUT

3.5 mm mini jack stereo audio-in (AUX)

MicroSD PLAYBACK

MicroSD decoder: reads MP3/WAV files stored on external units (up to 64 GB) with FAT/FAT32 file system.

CABLE

Length: 120 cm
Plug: 3.5 mm mini jack

BATTERY

Capacity: 300 mAh
Type: lithium-polymer battery
Battery life @ 50% volume: 15 hours
Charging time: 2 hours
Charging port: USB Type-C

OTHER FEATURES

Adjustable headband
Extra 3.5 mm mini jack to share music with other headphones

Product content

Lol& Roll Pop Kids Bluetooth Headphones
USB Type-C charging cable
Audio cable with microphone
Quick guide
LOL stickers
Cardboard toy

General overview

Driver
Headband
Line-in
Line-out
Bluetooth / MicroSD slider
Volume + / Next
Volume – / Back
Status indicator
Multifunction button
Charging port
MicroSD slot
Line-in jack
In-line microphone
Line-out jack
Built-in microphone

Main Functions

Switching on and off the device

To turn on your Lol&Roll Pop Kids Bluetooth Headphones, press and hold the Multifunction button (9) for 2 seconds. You will hear a confirmation sound and the Status indicator (8) will light up white. The Status indicator (8) keeps flashing white while your Lol&Roll Pop Kids Bluetooth Headphones are on. To turn off your Lol&Roll Pop Kids Bluetooth Headphones, press and hold the Multifunction button (9) for 3 seconds. You will hear a sound when yo switch them off.

Charging the battery

When the battery level is below 10%, the Status indicator (8) flashes red. You will hear a warning sound reminding you to charge it.

The Status indicator (8) glows red as the battery charges and turns off once the charging process is complete. To charge the battery, plug the USB end of the provided USB cable to your headphones’ Charging port (10), and the other USB end to any device with a USB charging port (PC, USB wall charger, car charger, etc.). It takes approximately 2 hours to charge it.

Important:
Do not store or leave the device completely discharged for a long time.

Bluetooth® pairing

Turn off your Lol& Roll Pop Kids Bluetooth Headphones and move the Bluetooth / MicroSD slider (5) to the Bluetooth position. Press the Multifunction button (9) for approximately 2 seconds until the Status indicator (8) starts flashing white. Your headphones are now ready to be paired with your Bluetooth device. Select Lol& Roll Pop Kids Bluetooth on your device screen and press “connect”. You will hear a confirmation sound when both devices are paired.
If you previously paired your Lol&Roll Pop Kids Bluetooth Headphones with a source device, they will synchronise with it automatically.

Using the Voice Assistant feature

Your Lol&Roll Pop Kids Bluetooth Headphones allow you to directly activate your smartphone’s voice assistant via Bluetooth connection. To do so, press the Multifunction button (9) twice. You can give the voice command after hearing the confirmation sound.

Auto power off function

To optimize battery life, your Lol& Roll Pop Kids Bluetooth Headphones will automatically turn off in the following situations:
After 5 minutes in search mode, if they are not synchronized with another device.

Bluetooth® playback control

Once your Lol& Roll Pop Kids Bluetooth Headphones are synchronized, you will be able to control basic playback functions such as turning up and down the volume and skipping to the next or previous song directly from your headphones.

Press Volume + (6) to turn up the volume or Volume – (7) to turn it down. You will hear a sound when reaching the maximum and minimum volume levels.

To skip to the next song, press and hold Next (6). You can also press and hold Back (7) to skip to the previous track.

Press the Multifunction button (9) once to pause or resume playback.

If you are using the audio cable instead of the wireless Bluetooth connection, you will have to control music playback from your music player and not from the headphones.

MicroSD player

Play .mp3 and .wav files stored on removable microSD cards (up to 64 GB). After inserting the memory card and moving the Bluetooth / MicroSD slider (5) to the SD position, playback will start automatically.

The track you are listening to will be saved to the internal memory when turning off the headphones or removing the storage card. If you connect the same removable storage unit once again, playback will resume from the last track you listened to.

Press and hold Volume + (6) or Volume – (7) to switch to the next or previous track.

The folders and files stored on your removable storage units will be read in chronological order.

Press the Multifunction button (9) twice to move to the next memory card folder.

Press the Multifunction button (9) three times to enable shuffle mode. Pressing the same button three times once again will disable this mode.

Important To prevent the microSD card from being easily removed or manipulated by children, insert or remove the card with a paper clip.

Call control (hands-free function)

Once your headphones are paired with your smartphone via Bluetooth connection, simply wear your headphones and you will be able to answer calls thanks to the Built-in microphone (15).

Press the Multifunction button (9) to answer an incoming call. When receiving a call, the song you are listening to stops and the ringing tone sounds instead. You can also press and hold this button for 2 seconds to reject the call.

Press the Multifunction button (9) once again to end a call. Playback will resume from the point at which it stopped.

Using the jack cable

To start using your Lol&Roll Pop Kids Bluetooth Headphones plug the Line-in jack (12) into the headphones’ Line-in (3) and the other cable end into your smartphone or PC.

Note: We recommend leaving a distance of approximately 5 cm between lips and microphone to ensure optimal performance.

Connecting two sets of Lol& Roll Headphones

To connect two sets of headphones to the same music player, connect the Line- in jack (12) to the headphones’ Line-in (3) and the other cable end to your smartphone or PC.

Then connect the Line-out jack (14) of the second cable to the Line-out (4) on the first set of headphones. Once you’ve done this, connect the Line-in jack (12) of the very same cable to the Line-in (3) on your second set of headphones. At this point you can listen to music through both sets.

Note: You will not be able to control playback from the second set of headphones while this mode is enabled. Use the control built into the cable connected to the music player instead to skip to the previous/next song or pause music.

Controls

Press the Multifunction button (9) to control music playback. Press this button once to pause/resume playback. Press it twice to skip to the next track. Press it three times to skip to the previous track.

Enjoy music together. You can do this using the Bluetooth connection, microSD cards or the audio jack. Just connect the

Line-out jack (14) of the cable to the Line-out (4) on the first set of headphones and plug the Line-in jack (12) of the very same cable into the Line-in (3) on your second set of headphones. At this point you can listen to music through both sets.