Motionblinds ZY4CM55 Wifi Matter Bridge User Guide

Motionblinds ZY4CM55 Wifi Matter Bridge

Product Specifications

• Device: Matter Wi-Fi Bridge
• Manufacturer: Coulisse B.V.
• Model: CM-55
• Serial Number: B8.0000.0000
• MAC Address: 40-66-7a-38-ea-44
• Power Supply: USB-C
• Location: Vonderweg 48, 7468DC Enter, The Netherlands
• Distance Requirement: >50 cm

Product Usage Instructions

Setup Process

1. Scan the QR code on the bottom of the bridge for setup.
2. Select your Wi-Fi network from the list and enter the network password.
3. Tick “Remember password” for convenience.
4. Observe the LED on the bridge changing to orange and then green upon successful connection.

Frequently Asked Questions (FAQ)
Q: What should I do if I lose the QR code on the bottom of the bridge?
A: It is recommended to store the QR code information securely, such as by taking a photo for backup.

Getting Started

1. Connect your bridge to power using the power adapter (connect only to easily accessible power outlet!). The LED will illuminate blue, indicating that the bridge is in pairing mode.
   

2. Install and start the Motionblinds Matter bridge App.

3. Scan the QR code on the bottom of the bridge.
   The QR code on the bottom side is essential for setting up the Matter Bridge and must therefore not be lost or damaged. Additional storage (e.g., as a photo) is recommended.

4. Select your Wifi network from the list and enter its network password. It’s recommended to tick „Remember password“.
   During the connection process, the bridge‘s LED will change to orange and finally to green after a successful connection. Now the Matter Bridge is connected to your Wi-Fi.

5. Now go to the home screen of the app. You can add home, rooms, devices, and additional bridges via the plus symbol.

For a detailed user manual of the app, scan the QR code below:

Reset

• To reset, you need to press and hold the reset button on the back of the  bridge with a thin object and release it in one of these reset modes.
• LED lights up green: WLAN credentials are reset.
• LED lights up red: Factory reset.
• Important: Only release the button when the LED is lit in the desired color to execute the corresponding reset mode.

Power adapter (USB-C) – This icon means voltage output positive and negative polarity

The power adapter model:
CW0501500 – Shenzhen Cenwell Technology Co. – Longhua, Shenzhen, Guangdong, China
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to= electrical earth.
Indoor use only
Direct current
Alternating current

Please observe the safety instructions on the back page

Documentation 2024, Coulisse B.V.
All rights reserved. Subject to errors and modifi cations.

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

Important Safety Instructions

Safety

• Please use the product only as intended. Any other use may result in damage to the product or its surroundings.
• Modifications or alterations may compromise product safety. Caution: risk of injury!
• Never open the product on your own. Do not attempt any repairs yourself.
• Handle the product with care; it may be damaged by shocks, impacts, or falls from even a low height.
• Keep the product away from moisture and extreme heat.
• Never immerse the product in water or other liquids, and keep it away from splashes, drips, and containers with liquids such as vases and drinks.
• The product must only be operated with the supplied power supply: CW0501500 – Shenzhen Cenwell Technology Co. – Longhua, Shenzhen, Guangdong, China.
• Ensure that ventilation slots are never covered. Do not place objects on them.
• Place the device away from heat sources, direct sunlight, and other electrical appliances.
• Protect the device from moisture, dust, aggressive liquids, and vapors. Do not use the device in damp areas (e.g., bathroom) or in explosive environments. Operate the device indoors only.
• Never leave children unsupervised when using electrical devices. Children may not always recognize potential hazards.
• Do not place open flames (e.g., burning candles) on or near the device.
• Connect the device to an easily accessible power outlet.

Safety Instructions for Wireless Transmission
Your device contains components for wireless transmission. Therefore, observe the following safety instructions when handling it:

• If the device is near a medical electronic system, it may potentially affect the functioning of medical devices.

• Keep the device at least 20 cm away from a pacemaker, as radio waves may interfere with the proper functioning of the pacemaker.
  Transmitted radio waves may cause interference in hearing aids.

• Do not expose the device to flammable gases or explosive environments (e.g., paint shops), as transmitted radio waves may potentially trigger an explosion or fire.

• The range of the wireless connection depends on environmental conditions and may be significantly affected by the environment and sources of interference.

• During wireless data transmission, unauthorized third parties may intercept data.

Data Transmission

• Your device communicates wirelessly with other devices (e.g., sensors, via the Internet and mobile networks). All wireless transmission paths and connections to the Internet are potentially susceptible to interference.
• We have carefully selected and tested all system components. Nevertheless, data loss during the transmission of information and messages cannot be ruled out. No liability is assumed for damages resulting from data losses, connection disturbances, and interruptions.
• This product may enable external access, incurring additional costs for data transmission from the service/mobile operator. Therefore, be sure to check your agreement with your mobile operator regarding your data plan. Check your service/mobile contract or contact your service/mobile operator before using the services.

Additional Notes
Please note that while this system can handle security tasks such as notifications when a sensor is triggered and sending alarm messages, it cannot replace a professional hazard warning system or alarm system.

Warranty

Upon purchasing this product, you receive a two-year warranty in accordance with German legal provisions. Please also refer to the General Terms and Conditions and warranty information.
ATTENTION! No liability is accepted for consequential damages. Technical changes and errors reserved.

Disposal
This electronic device must not be disposed of in household waste and must be disposed of in accordance with local regulations. For proper disposal, please contact the public collection points in your municipality. For details on the location of such collection points, any quantity restrictions per day/month/year, and any costs for collection, please refer to the information provided by the respective municipality.

Declaration of Conformity, Software Downloads, Manuals

The Coulisse B.V. declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The complete Declaration of Conformity can be found at: support.motionblinds.com
User manuals and further information can be found on the Internet at support.motionblinds.com

FCC Warning

1. FCC Information for User
   This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals.

2. FCC Electronic Emission Notices

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance separating the equipment and receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

References

• Home | Motionblinds Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>