Sentinel AAM0108 Radio Gate KIT Instruction Manual
- June 1, 2024
- SENTINEL
Table of Contents
Sentinel AAM0108 Radio Gate KIT
FEATURES
- Power supply: 12V or 24V AC/DC
- Frequency: 433,92 MHz
- Transmitted max. power: < 10mW
- Dimensions: 106x53x20 mm
- Maximum number of storable
- remote controls: 127
Wiring connection
The dry contact output has to be connected directly to the dry contact input of your automatism (entry normally used to connect a push button, key selector, video door input system, …)
Remote controls’ programming
- Press 1 second the learning button, and the blue LED light will turn on.
- When the blue LED light turns on, press one of the buttons of the remote control for 3 seconds (the blue LED light is flashing when you start to press on the remote control)
- When the blue LED light is turned off, the programming is finished.
Cancel remote control memory
Press and maintain the learning button, and the blue LED lights up. Maintain
the learning button until the blue LED light extinction (about 10 seconds).
WARRANTY
The invoice and barcode will be required as proof of purchase date during the warranty period.
ASSISTANCE TECHNIQUE
Keep the device away from fire. Do not use it in a tropical climate. Keep
the product and its packaging out of reach of children and animals. It’s a
potential source of danger. This equipment is intended for private consumer
use only. Handle the elements with care as their electronics are fragile. Do
not let children play with the product or with the packaging. Don’t throw
batteries or out-of-order products with the household waste (garbage). The
dangerous substances that they are likely to include may harm health or the
environment. Make your retailer take back these products or use the selective
collection of garbage proposed by your city. Do not let children play with the
product or with the packaging. This manual is an integral part of your
product. Keep it in a safe place for future reference. Refer to your late
owner manual for the remote control learning process.
CHANGING THE BATTERIES
- If the LED flashes for 1 second when the remote control is pressed, the battery must be changed.
- 2-year warranty, by French regulations. It is imperative to keep proof of purchase during the whole warranty period.
- For an individual answer, use our online chat on our website www.scs-sentinel.com
WARNING
Don’t throw batteries or out-of-order products with the household waste
(garbage). The dangerous substances that they are likely to include may harm
health or the environment. Make your retailer take back these products or use
the selective collection of garbage. Do not ingest battery, Chemical Burn
Hazard. This product contains a button-cell battery. If the button cell
battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death. Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using the product and keep
it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Do not clean the remote control with abrasive or corrosive substances.Use a simple cloth. Do not allow children to play with the product or packaging. Hereby, SCS Sentinel declares that this product complies with the essence-trial requirements and other relevant provisions of Directive 2014/53/UE. The UE declaration of conformity may be The declaration of contermine may be consulted on the website: www .scs-sentinel.com/downloads.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>