MOTIONBLINDS CM-03-E Roller Blind Motor User Guide
- June 9, 2024
- MOTIONBLINDS
Table of Contents
SETUP GUIDE
ROLLER BLIND
MOTOR CM-03-E
CM-03-E Roller Blind Motor
WARNING
Read the instructions carefully before assembling and using the product.
Assembly can be completed by non-professionals.
For indoor use only.
- Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings.
- To avoid strangulation and entanglement, keep cords out of reach of young children.
- Cords may ensnare a child’s neck.
- Move beds, cots and furniture away from window covering cords.
- Do not tie cords together.
- Make sure cords do not twist together and form a loop.
Cleaning
Follow these general rules when cleaning the outside of the device and its
components:
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Do not use aerosol sprays, solvents, alcohol, or abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt to open the device or
disassemble it. You run the risk of electric shock and voiding the limited
warranty.
No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the product appears to be damaged
or does not function properly, go to your local dealer for instructions on how
to obtain warranty service.
Recycle
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
**** Buttons and functions
-
Install the blind
Follow the steps in the installation instructions to install the blind.
-
Activate the blind
To activate the blind, connect it to a standard USB-C 5V power supply via a USB-C cable.
This can be your iPhone’s power adapter, for example.
-
Download the Eve app
Download the Eve app from the App Store.
-
Setup the blind
Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
If you have previously set up an accessory, go to Settings and tap Add Accessory.
The end positions of the blind, top and bottom, are pre-programmed. These can be adjusted by following the steps in the app.
-
Hide the HomeKit Setup Code
Slide the tassel up and rotate a quarter turn to hide the HomeKit Setup Code into the tassel.
**** Recharge the blind
To charge the blind, connect it to a standard USB-C 5V power supply via a
USB-C cable.
This can be your iPhone’s power adapter, for example.
Conforms to UL Std. 325
Certified to CSA Std. C22.2#247
Documents / Resources
|
MOTIONBLINDS CM-03-E Roller Blind
Motor
[pdf] User Guide
CM-03-E Roller Blind Motor, CM-03-E, Roller Blind Motor, Blind Motor, Motor
---|---