eve MOTIONBLINDS Select Blinds Motors User Guide

setup guide
ROLLER SHADE Select Blinds motors powered by
Eve MotionBlinds works with Apple Homekit technology.

Buttons and functions

1. Install
   Follow the steps in the installation instructions to install shade.

2. Activate
   To activate the shade, connect it to a standard USB-C 5V power supply via a USB-C cable.
   This can be your iPhone’s power adapter, for example.
   

3. Download the Eve app
   Download the Eve app from the App Store.

4. Setup the shade
   Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
   If you have previously set up an accessory, go to Settings and tap Add Accessory.
   The end positions of the shade, top and bottom, are pre-programmed. These can be adjusted by following the steps in the app.

5. Hide the HomeKit Setup Code
   Slide the tassel up and rotate a quarter turn to hide the HomeKit Setup Code into the tassel.

Recharge the shade

To charge the blind, connect it to a standard USB-C 5V power supply via a USB-C cable.
This can be your iPhone’s power adapter, for example.

| |
---|---|---
LED light flashes red during  operation; Charge the battery| LED light flashes green; battery is charging| LED light constantly green; battery is fully charged

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>