Tes Studio 21 Y Smart Electric Sunroof Shade Installation Guide
- September 29, 2024
- TES STUDIO
Table of Contents
Tes Studio 21 Y Smart Electric Sunroof Shade
Specifications:
- Model: Model Y intelligent electric sunroof shade
- Compatibility: LHD and RHD
- Processor: Does not distinguish between Inetl/AMD
Product Information
The Tesstudio Smart electric sunroof shade is a high-grade shade cloth
designed for easy installation in your vehicle. It offers lossless
installation, sun protection, insulation, and operates
silently without stuttering. With features like auto-scaling, pause/start
function, and one-click open/close, it provides convenience and comfort while
driving.
Installation Instructions:
Tools Required:
- Plastic trim removal board
- Phillips screwdriver
- Threading tape
Precautions:
Caution: Ensure the power is turned off to prevent any operational issues. Read the instructions carefully for faster installation.
Installation Steps:
- Turn off the main power in the vehicle settings.
- Press the rear-seat button from the trunk.
- Use plastic trim removal to take off the left trim of the trunk.
- Connect our product’s wiring harness to the original car’s cigarette lighter plug.
- Thread the wiring harness to the back window using threading tape.
- Secure the power plug to the back of the threading tape with tape.
- Lift the shade into the car (two people recommended).
- Connect the motor plug to the power plug passing through the front roof.
- Insert the pin behind the shade curtain into the rear trim board.
- Insert latches between the glass and trim above the front seat.
- Screw in the bolts with a Phillips screwdriver.
- Adjust the shade position and cover any exposed parts.
FAQ:
-
Q: Can I install this product on any vehicle?
A: The product is designed for special car models with non-destructive installation. Please check compatibility before installation. -
Q: How do I operate the smart electric sunroof shade?
A: Short press for forward/backward auto-scaling, press again for pause/start function. Use one click to open and close the shade.
Parts List
| | |
---|---|---|---
①| Smart electric sunroof shade| ⑤| Phillips screwdriver
②| Cigarette lighter switch cable| ⑥|
③| Latch and screw| ⑦|
④| Covering cloth| ⑧|
Tools required for installation
Plastic trim removal, Phillips screwdriver, threading tape
Installation precautions
Caution: Please ensure the power off operation, to prevent failure code.
Tips: For faster installation, be sure to read the instructions carefully
The smart electric sunshade-Product selling point
- Year: 21+Model Y
- Name: Model Y intelligent electric sunroof shade
- LHD and RHD: Not distinguish Processor: Does not distinguish Inetl/AMD
Product Features :
- Installation: special car, original car mold, non-destructive installation, no damage to the original car parts
- Experience: hot summer, sunshade solarization to protect the car, summer is to enjoy air conditioning level cooling
- Process: the use of car level 5 layer composite heat insulation shade cloth, original color
- Function: a key to open and close electric expansion, shading and cooling, avoid sunlight and heat insulation
Product Description :
- Special car, the original car opening mold and the original roof seamless combination of 100% cover no light leakage, one installation, convenient and fast, no installation experience, can achieve 15-20 minutes of rapid and non-destructive installation, will not damage the interior of the original car.
- Hot summer, all day long, shade to protect the car, summer is to enjoy air-conditioning level cooling sun protection is urgent, no deformation no noise.
- The use of car gauge level 5 layers of composite heat insulation sunshade cloth, the original color, into the car color is more beautiful, more harmonious, shading heat insulation without odor, comprehensive upgrade, simple and beautiful, to avoid high temperature exposure in the car, heat insulation and cooling.
- Intelligent electric free retractable, minimalist design, shading straight down temperature (cover and not cover at a glance), easy adjustment with one hand, want to cover where to cover where in one step, with the press, silent, anti-thermal insulation, full coverage of anti-light zero, fear of fierce summer.
Installation Instruction
- Installation tools: plastic trim removal board, Phillips screwdriver
- Turn off the main power in the vehicle setting
- Press the rear-seat button from the trunk
- Use plastic trim removal take off the left trim of the trunk
- After remove the trim, find the plug of the original car cigarette lighter
- Connect with our products wiring harness
- Take off the upper left panel
- Move the harness to the top
- Use the threading tape from the back to the back window
- Glass position on the top of the back window
- Use tape to tie the power plug to the back of the threading tap
- Pull down the upper glass in the back window and untie the tape
- Lift the shade into the car (two people are recommended to operate)
- Connect the plug on the motor into the power plug that passes through the front (hide the plug in the roof).
- Insert the pin behind the shade curtain into the rear trim board (hold it after inserting)
- Insert these two latches into the gap between the glass and the trim above the front seat (left and right).
- Insert the bolt (left and right the same
- Need to push the shade up the top, as shown in the figure, align the screw eye (left and right the same)
- Use a Phillips screwdriver to screw (left and right the same)
- Cover the bare parts of the front seat like silver (Restoration is enough)
Smart electric sunshade-FAQ guide
| issuse | reason | solution |
|---|---|---|
| After installation, press the button to not open or close | Check the cigarette | |
| lighter is connected | Reconnect the cigarette lighter | |
| Check that the pairings are connected | Connect the cable | |
| The installation does not match | Incorrect installation | Scan the QR code for |
installation instructions or installation video (front and rear bars are
correct)
Not stretch| Check the transverse bar is damaged during transportation|
Contact customer service processing
It’s gonna stall in the middle of it| The position is stuck| Pay attention to
the installation position
Crinkled| Installation technique| Straighten and fix the fold again
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>