NINJA BC200 Series Blast Max Portable Blender User Guide

NINJA BC200 Series Blast Max Portable Blender

Specifications

• Power Source: Battery
• Capacity: Up to 1 cup
• Max Fill Line: Do not exceed
• Liquid Line: Minimum and Maximum levels indicated

Product Usage Instructions:

Loading Ingredients
Do not blend without ingredients or lid. Ensure ingredients do not exceed the MAX FILL line when loading the vessel. Follow the order below:

1. Add liquid up to the MIN LIQUID line.
2. Add fresh fruits.
3. Add up to 1 cup of leafy greens.
4. Add dry or sticky ingredients like protein powders, nut butters, and seeds.
5. Finish off with ice or frozen ingredients.

Blending Process
Follow these steps for blending

1. Install the vessel onto the motor base by twisting clockwise until it clicks into place.
2. Turn the unit ON using the power button and ensure the indicator light is GREEN for a full battery.
3. Remove the lid and add ingredients in the specified order.
4. Secure the lid to the vessel.
5. Select the appropriate blending mode (BLEND or CRUSH).
6. If a smoother consistency is desired, blend again.
7. Once blending is complete, turn off the motor base, remove the vessel, and enjoy through the sip lid.

FAQ

• Q: Can I blend without adding liquid first?
  A: It is recommended to add liquid first up to the MIN LIQUID line before adding other ingredients to ensure proper blending.

• Q: What should I do if the battery indicator light is not turning GREEN?
  A: Ensure the vessel is properly secured on the motor base and try repositioning it. If the issue persists, refer to the troubleshooting section of the user manual or contact customer support.

• Q: Can I blend hot ingredients in this product?
  A: It is not recommended to blend hot ingredients in this product. Allow hot ingredients to cool down before blending to avoid damage to the blender.

LOAD IT UP

DO NOT blend without ingredients or without lid. DO NOT go past MAX FILL line when loading vessel.

PREP TIPS : For best results, cut ingredients in 1–2-inch pieces.

For how-to videos and getting started,  scan the QR code.

CARROT APPLE KALE WAKE-UP

PREP: 5 MINUTES

• TOTAL TIME: 6 MINUTES
• MAKES: 1–2 SERVINGS

INGREDIENTS

• 3/4 cup carrot juice
• 1/2 cup packed chopped kale, stems removed
• 1/4 cup green apple peeled, cored, cut into 1/2-inch chunks
• 1/2 cup frozen pineapple chunks

DIRECTIONS

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the GREEN indicating the battery is full.

3. Remove the lid and add ingredients to the blending vessel in the order listed.
   Secure the lid to the vessel.

4. Select BLEND.

5. After blending, if smoother consistency is desired, press BLEND again.

6. When blending is complete, power motor base off, remove the vessel from the motor base, and enjoy through the sip lid.

MIXED BERRY VANILLA PROTEIN SMOOTHIE

• PREP: 3 MINUTES
• TOTAL TIME: 4 MINUTES
• MAKES: 1–2 SERVINGS

INGREDIENTS

• 1 cup oat milk
• 1 scoop (1 ounce) vanilla whey protein powder
• 3/4 cup mixed frozen berries

DIRECTIONS

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the  is GREEN,  indicating the battery is full.

3. Remove the lid and add ingredients to the blending vessel in the order listed.
   Secure the lid to the vessel.

4. Select BLEND.

5. When blending is complete, power motor base off, remove the vessel from the motor base, and enjoy through the sip lid.

FROZEN MOCHA COLD BREW

• PREP: 3 MINUTES
• TOTAL TIME: 4 MINUTES
• MAKES: 1–2 SERVINGS

INGREDIENTS

• 3/4 cup cold brew coffee concentrate
• 1/2 cup whole milk
• 1/4 cup chocolate syrup
• 1/2 cup ice

DIRECTIONS

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the  is GREEN,  indicating the battery is full.

3. Remove the lid and add ingredients to the blending vessel in the order listed.
   Secure the lid to the vessel.

4. Select CRUSH.

5. When blending is complete, power motor base off, remove the vessel from the motor base, and enjoy through the sip lid.

NOTE

• Milk may expand during processing. If removing lid before drinking, do so carefully to avoid spilling.
• Unintentional blending can occur when the lid is removed.
• Turn the motor base off using the button when not in use.

MANGO MARGARITA

• PREP : 4 MINUTES
• TOTAL TIME: 5 MINUTES
• MAKES: 2 SERVINGS

INGREDIENTS

• 1/4 cup tequila
• 3 tablespoons triple sec
• 1/2 cup frozen lime cocktail mixer
• 3/4 cup frozen mango chunks
• 1/3 cup ice

DIRECTIONS

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the  is GREEN,  indicating the battery is full.

3. Remove the lid and add ingredients to the blending vessel in the order listed.
   Secure the lid to the vessel.

4. Select CRUSH.

5. When blending is complete, power motor base off, remove the vessel from the motor base, and enjoy through the sip lid.
   TIP: If a creamier output is desired, remove vessel from motor base after processing, shake, then reinstall vessel and press BLEND. Process until complete.

NOTE: Unintentional blending can occur when the lid is removed. Turn the motor base off using the button when not in use.

APPLE CINNAMON OAT BREAKFAST SMOOTHIE

• PREP: 5 MINUTES
• TOTAL TIME: 6 MINUTES
• MAKES: 1–2 SERVINGS

INGREDIENTS

• 1 cup whole milk
• 2 tablespoons maple syrup
• 1/2 cup green apple, peeled, cored, cut into 1/2-inch chunks
• 1/2 cup frozen banana slices
• 1/2 cup whole milk vanilla yogurt
• 1 teaspoon ground cinnamon
• 3 tablespoons quick oats
• Pinch kosher salt

DIRECTIONS

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the  is GREEN,  indicating the battery is full.

3. Remove the lid and add ingredients to the blending vessel in the order listed.
   Secure the lid to the vessel.

4. Select BLEND.

5. When blending is complete, power motor base off, remove the vessel from the motor base, and enjoy through the sip lid.

NOTE: Unintentional blending can occur when the lid is removed. Turn the motor base off using the button when not in use.

QUICK ASSEMBLY

For best results, ensure the blender is fully charged before use.
Clean before first use.

NOTE: Accessories and color vary by model.

WARNING: Handle the blade assembly with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

CONTROL PANEL

LED Indicators:
Displayed through power button icon and blending program LEDs.

Charging

• Use the provided charging cable to charge the unit.
• Charge the unit fully before first use.
• A full charge should take approximately 3 hours.

Ready to Blend
Blending Programs Solid White Power LED will illuminate with battery life color.

Blocked Blades Error
Selected Blending Program Flashes Purple Ingredients are stuck in the blades.
Add more liquid or shake the vessel to dislodge the blocked ingredients from the blades.

Vessel Improperly Installed Error
Blending Programs Flash White
Vessel is not properly installed onto motor base. Re-install vessel. Vessel will “click” when properly installed onto motor base.

Motor Overheating Protection Error
Blending Program Solid Orange
Motor base is overheating. Let sit at room temperature to cool down for 60 minutes.

NOTE: Unit will not charge if overheating error is present.

BLENDING INSTRUCTIONS

Before blending, ensure your blender is fully charged.

Check the battery LED color before blending. (Solid Green: fully charged,
Solid Red: low battery,
Flashing Red: no battery)

1. Install the vessel onto the motor base, twisting clockwise until the vessel clicks onto the motor base.

2. Turn the unit ON using the power button and ensure the power icon is GREEN, indicating the battery is full.
   Refer to LED guide on side of motor base for more battery information.

3. Remove the lid before loading ingredients.

4. Add your ingredients, starting with liquid ingredients, then adding softer ingredients, and finishing with tougher  ingredients (frozen fruit and ice).

5. Secure the lid to the vessel.

6. Select your blending mode:
   Blend: (30-second manual) for protein shakes and fruit smoothies
   Crush: for frozen drinks

7. When blending is complete, remove the vessel from the motor base and enjoy through the sip lid.

CLEANING INSTRUCTIONS

DO NOT expose the motor base to liquid during the cleaning process.
Remove vessel from motor base before cleaning vessel.

QUICK CLEAN

1. Remove vessel from motor base and remove lid from vessel. Add warm water to the 6 oz. line then add 1 small drop of dish soap.
2. Secure the lid onto the vessel, attach the vessel onto the motor base, and press BLEND.
3. After blend is complete, remove vessel from motor base, empty contents, and rinse vessel and lid with warm water.
4. If needed, wipe motor base with a damp cloth.

HAND-WASH

1. Remove the vessel from the motor base and wash the lid and vessel with warm soapy water.
2. Use a dishwashing utensil to clean the CrushBlade™ Assembly inside the vessel. Exercise care when cleaning the CrushBlade™ Assembly as the blades are sharp.
3. Empty contents and rinse vessel and lid with warm water.

DISHWASHER CLEANING

1. Vessel and sip lid are top-rack dishwasher safe. DO NOT use a heated dry cycle.

For additional recipes and information  on Ninja Blast™ Max, scan the QR code.

© 2024 SharkNinja Operating LLC.
AUTO-IQ and NINJA are registered trademarks of SharkNinja Operating LLC.
CRUSHBLADE and NINJA BLAST are trademarks of SharkNinja Operating LLC.
BC200Series_QSG_IG_MP_Mv5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>