BRILLIAN STD AD100 Standalone N2 Purge System Instruction Manual
- June 3, 2024
- Brillian
Table of Contents
Standalone N2 Purge System
Operation Manual Ver 1.0
Version STD AD100
The reproduction of any part of this user manual, in any from (by
photocopying, microfilming or any other process) or the processing and
distribution of the contents by electronic means is prohibited without the
expressed written consent of Brillian.
It is prohibited to copy the software or use it for other purposes. it is
expressly prohibited to distribute copies of the software to third parties.
Violators will be held liable for damage.
Brillian Network & Automation Integrated System Co., Ltd.
Brief introduction of equipment
Brillian Material Handling Solution(BMHS)
We provide a FAB semi-automatic material handling solution. Through a material
storage devices, integrating the BMHS system and database, product locations
and determine the transmission route, optimal throughput and increase
productivity.
Rack management collects all eRack status information, exchanges information
on behalf of all
Racks and MES. Provides admin search queries, work order inquiries,
statistical analysis, etc.
The eRack shelf can read the RFID tag on the foup by RFID antenna, transfer
the carrierID data to the background for unified management, and then receive
the foup information from the background to the operator.
Feature of Product
- The BMHS system centrally monitoring shelfs of STD AD100.
- Integrate MES and BMHS real time management systems to control all products in the factory.
- Significantly improve productivity.
- Flexible system’s configuration and higher utilization rate.
- Provide various statistical data to facilitate analysis and decision-making.
- RFID Reader helps to confirm whether the products and sites are correct before assisting production, which greatly reduce errors.
Description of safety rule of STD AD100
2.1 Instruction for use。
2.1.1 This manual is only written for Purge System Module。
2.1.2 Non-qualified or non-professional personnel are not allowed to operate
or maintain the machine。
2.1.3 “Operator” should read carefully the software operation in advance。
2.1.4 “Maintainer”, in addition to getting familiar with software operation,
should read carefully the maintenance manual and circuit diagram。
2.1.5 Before careful reading of operation manual or before thorough
understanding of machine function, it is not allowed to operate the machine
singly, and it needs an experienced guy standing beside for instruction。
2.2 Instruction for transport
When transporting or moving a machine, it is suggested to use a cart for the
transport, please also wear steel shoes for personal safety. The cart should
be able to carry a load of more than 100Kg
2.3 For scarping of equipment or disposal of waste, please follow the local
regulations
2.4 Instruction for illuminance in the work area: Please follow the lighting
environment provided by the plant of the client send.
2.5 The machine is not suitable to work in explosive circumstances
2.6 Before ex-factory, the level of noise should be less than 80dB (A).
2.7 About “Warnings and Cautions”
-
When power is supplied, non-professional personnel should not operate it to avoid electric shock hazard.
-
Before checking, maintenance and repair, please turn off the power.
-
Description of starting steps
3.1 Adapter to be AC 100~230V -
Description of stopping steps
4.1 Please remove Adapter -
Facility Requirement&SPEC
| Product Name | Standalone N2 Purge System |
|---|---|
| Model Type | STD AD100 |
| Rating(Adapter) | 100~230VAC, 50/60Hz, 1ɸ+PE |
| Length X Width X Height(mm) | |
| Weight | kg |
| Frequency | 134.2KHz |
FCC Rules
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation Warning: Changes or
modifications to this unit not expressly approved by the party responsible
for compliance could void the user authority to operate the equipment.
This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
STD AD100
| Module | Illustration |
|---|---|
| 
STD AD100 Hardware
8.1 Hardware Method
Operation Description
Put a FOUP fixed on the goods which you need to get goods information. The Transponder has a data record for the good During the Host computer sent a order message to the CIDRW through RS232 or HSMS The CIDRW will sent back the goods information which read from the Transponder by radio frequency.
Periodical Maintenance
10.1 Cleaning Plate
10.1.1 Purpose：Cleaning Plate Particle
Material：NA
Manual tool：Cleanroom wiper、DI Water
Notice：Before action, please confirm whether the machine is down
PM Step：Cleanroom wiper cloth into the DI Water from inside to outside and
from top to clean the Plate surface.
Manufacturer and publisher
Brillian Network & Automation Integrated System Co.,Ltd
Add: No.41, Keyi St., Zhunan Township, Miaoli County 350,
Taiwan, R.O.C.
Tel: 886-37-580708
Fax: 886-37-580728
Email：services@brillian.com.tw
Website： http://www.brillian.com.tw
Documents / Resources
|
BRILLIAN STD AD100 Standalone N2 Purge
System
[pdf] Instruction Manual
STDAD100, 2A583-STDAD100, 2A583STDAD100, STD AD100 Standalone N2 Purge System,
STD AD100, STD AD100 N2 Purge System, Standalone N2 Purge System, Standalone
Purge System, N2 Purge System, Purge System
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>