Brillian medipro Podiatry/Pedicure Drill with Built In Vacuum Instruction Manual

medipro Podiatry/Pedicure Drill with Built In Vacuum
Instruction Manual

medipro MANUAL

INTRODUCTION

Make sure to read this user manual before using.
This user manual is to assure proper installation and use.
Pay attention to read this manual in order to make the best use of this product and to assure the prolonged lifespan before using.
Especially, pay attention the contents with marks such as
< Classification of equipment>
• Type of protection against electric shock
– Control Box: Class II appliance
Design and specification of the product can be subject to be changed without notice for improving the quality.

USER GUIDELINES

WARNING

• Check the power watch before connecting the power coedit order to decrease the danger by sudden operatic.) of product.
• Do not use the damaged bur. It cases product’s matfaction and accident
• Replace the bur after stopped the handplece
• De careful not to crop the product as it may be damaged or broken h case that Is dropped check if the btr is bent or that any overheat is generated ythie carefully operating it.
• Follow the user manual by menufacttrer of big to use bur.
• Keep the recommended speed lint by matufacturer of bur to use tor. If exceed the speed linit it might casean aoident
• Contact to the manufacturer incase of damage of power cad and cable. It causes fire or electric stork.
• When unplugging the power cord. be sure to gasp the plug and do not hold the plug with wet hands.
• Do not use wide the poner plug s loose. It cases electric shock a fire.
• Do not bend or press the paver cord excessively. It caseselectric shock a fire.
• Do not install rear a hot air baloon or plate candes or cigarettes around It causes fire.
• Carefully observe whether tie elderly. the dsabled or children are rear the place where this product is entailed and do not lease chldren alone.
• If use the adenslon cord, do rot use many electnc dances at one we. It cases fire or electric shock.
• Do not install it n a humid place such as a bathroom or ha place exposed to snaky cr rah. It cases electric sled( or fire.

PRODUCT FEATURES & ADVANTAGES

• Max. 40,000 rpm
• Max 5.0 N-cm
• Vacuum
• Rotation Direction Select Function (Forward/Reverse)
• Use the standard Bur 02.35

PRODUCT COMPONENTS

• Please check all components are included.

1. Control box|  2. Handpiece| 3. ON/OFF foot controller

4. Power Cord| 5. Dust Bag| 6. Handpiece Holder

PART NAME OF CONTROL BOX

BUTTONS ON THE OPERATION PANEL

■ Power button:
When you push the power button, the power turns on and figures show on the rotation speed display and vacuum level display.
■ Rotation direction select button :
it is used to choose forward/reverse direction.
■ Hand/Foot select button:
When selecting ‘Hand”, adjust rotation speed or vacuum level by rotating the dial. : When selecting “Foot”, you can operate by pressing foot pedal.
■ Auto/Manual select button:
When selecting “manual”, rotation speed and vacuum level can be controlled separately, : When selecting “auto”, rotation speed and vacuum level can be controlled simultaneously.
■ Motor ON/OFF button :
You can operate production or stop.
■ Vacuum level ON/OFF button :
You can operate vacuum function or stop.

CONNECTION OF EACH PART

Control box connection

1. Dust bag connection : Assemble dust bag into the handpiece connector.
2. Handpiece connection : Connect pins of the hand-piece connector to the control box correctly. (Pins should be to the upper direction.
3. Foot pedal connection : Connect foot pedal.
4. Power cord connection : Connect power cord to the back part of the control box.

OPERATION PROCESS

1. Turn power on at the back of the control box.

2. Turn on at the front of the control box. (Figures show on the rotation speed display and vacuum level display when turning power on.)

3. Select rotation direction. When FWD lamp turns on, it rotates in forward direction and when REV lamp turns on, it rotates in reverse direction.

4. Select vacuum mode.
   • In the model of “AUTO”, rotation speed and vacuum level can be controlled simultaneously. (Speed changes simultaneously by turning rotation speed dial.)
   • In the model of “MANUAL, rotation speed and vacuum level can be controlled separately. (Adjustment by each dial)

5. Turn on vacuum function by turning on the vacuum ON/OFF button. (Turn off this function if you don’t use.)

6. Select hand/foot mode.

■ How to use when select the hand
– Motor rotates when pressing motor on/off button.
– Motor stops when pressing motor on/off button one more.
■ How to use when select the foot
– Press the foot pedal. Motor rotates during pressing the pedal.
– Motor stops when foot pedal is released.
Turn off the power when finished work.
– Change rotation direction when motor stops compeletely.
– Replace the bur when motor stops completely.
– Never operate the motor wihtout dust bag.

ERROR CODE

Reconnect handpiece. If not, contact to the seller.

■ Before requesting A/S
If an abnormality occurs during use, check the following.

Have you checked the power of control box?
Has there been a power outage?
Do you use the electric capacity correctly?
Have you checked the fuse?
Is the handpiece cord properly connected?
Are the burs not fixed or come off?
Are you using a bur that meets the specifications?
Have you not cleaned it with water?
Have you drop it while moving?

■ About A/S
We have major parts for A/S for consumer protection. If a failure occurs during use after purchasing this product, contact the place of purchase. I will kindly help you.

MAINTENANCE OF THE PRODUCT

■ HOW TO CHANGE THE DUST BAG

1. Turn off the power.
2. Hold the handpiece connection and pull it forward to separate it from the body.
3. Grab the motor and shake off the lake lightly to shake off the dust accumulated inside.
4. After replacing the dust bag with a new one, mark the pin of the handpiece connection well and insert it again.
   

■ When you can’t inhale dust
Hold the motor and shake the lake lightly to remove dust (do it every time you replacethe dust bag)
Still, please contact the place of purchase when there is no change.

PRODUCT SPECIFICATION

■ CONTROL BOX

| Model name| CMDV4
---|---|---
Input| AC 100-120V / 220-240V
Fuse| 5A / 2A
Rated Frequency| 50/60 Hz
Power consumption| 120W

■ HANDPIECE

| Model name| HMD03
---|---|---
Max. rpm| 40,000 rpm
Bur dimension| 02.35

■ Foot controller

| Model name| ON/OFF foot controller
---|---|---
Classification by degree of protection against water inflow| IPX 1

WARRANTY

The warranty for this product is guaranteed for the product as follows in accordance with the standards notified by the Fair Trade Commission of the Consumer Damage Compensation Regulations, and is carried out at the headquarters customer center and designated NS center upon request for service.
The free warranty period of this product is one year from the date of purchase and is guaranteed in accordance with the consumer damage compensation regulations. Failures within the warranty period are not subject to any technical fees and parts fees in the following cases.

• If there is a problem with the product itself when first installed
• In case of malfunction due to manufacturing abnormality in normal operating condition

Exception of warranty

• User’s misuse or improper use and treatment
• Use the product with incorrect input voltage (AC voltage) Drop the device during setting, moving and using.
• Use the not recommended consumables or accessories
• Malfunction after repairing the product at the not recommended repair shop
• Faulty by Act of God
• Attempt to disassemble or modify product

SYMBOL

| On (Power)| | Off (Power)
---|---|---|---
| Consult Instruction For Use| | General Warning Sign
| Serial Number| | Class II appliance
| Fuse| | Alternating Current
| This product should not be mixed with other commercial waste for disposal| | CE Marking

SRESHIrl SAESHIN PRECISION CO., LTD.
52, Sechearro 1-94 Dasa-eup, Ka TDelaisa?
2341 / Fax 82-53-580-0999
Tel 053-587-2345
Fax 053-580-092
www.saeshin.com
[email protected]
SOM-00595-KE lRey 0 j 2021-10-20
Kaitstud / Secured by https://mereneid.eu/

References

• Mereneid - All aspects of professional nail care

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>