COSTWAY CM24773 LED Stacked Ghost User Manual
- September 28, 2024
- COSTWAY
Table of Contents
COSTWAY CM24773 LED Stacked Ghost
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Parts Description
ASSEMBLY
MAKE SURE TO FOLLOW THE STEPS BELOW FOR A SUCCESSFUL & EASY ASSEMBLY
TIP : To ensure the final unit is secure and sturdy, it is highly
recommended to secure each component with the zip ties provided after
connecting each component together in the steps.
TO ASSEMBLE
- Remove all components from the box and lay flat on the floor.
- Insert the prongs of the Lower Arm into the corresponding rings on the Lower Ghost Connect (D). (FIG.A STEP 1)
- Insert the prongs of the Middle Arm into the corresponding rings on the Middle Ghost Connect (C). (FIG.A STEP 2)
- Insert the prongs of the Middle Ghost (C) into the corresponding rings on the Lower Ghost Connect (D). (FIG.A STEP 3)
- Insert the prongs of the Upper Arm into the corresponding rings on the Upper Ghost Connect (B). (FIG.A STEP 4)
- Insert the prongs of the Upper Ghost (B) into the corresponding rings on the Middle Ghost Connect (C). (FIG.A STEP 5)
- Insert the prongs of the Hat (A) into the corresponding rings on the Upper Ghost Connect (B). (FIG.A STEP 6)
- Secure the installing points with plastic ties (E) and secure the base to the soft ground by fully inserting the ground stakes (F) into the ground.
- Plug the light set into a power outlet.
Attention! Please do not change the power cord privately to avoid accidents. Unplug the power plug after use.
Return / Damage Claim Instructions
-
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted. -
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts. -
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged. -
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>