MINISO X62 Wireless Earbud User Manual
- September 27, 2024
- MINISO
Table of Contents
PRODUCT MANUAL
Wireless Earbud X62
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT IN A SAFE PLACE
Specification of Product
Model of Product: X62
Version: V5.4
Effective Distance: Approx. 10m
Speaker Diameter: 14.2mm
Impedance: 22Q
Frequency Respinse: 20Hz-20KHz
Microphone Sensitivity: -42dB+3dB
Earphone Input: 5V 50mA
Charging Case Input: 5V 600mA
Charging Case Output: 5V 100mA
Earphone Battery Capacity: 50mAh
Charging Case Battery Capacity: 600mAh
Duration: Approx. 5.5 H (Earphone)
Earphone Charging Time: Approx. 1.5 H
Charging Time of the Charging Case: Approx. 2 H
Item list
Welcome toMINISO Wireless Earbud
Take out and pair it
When using for the fest time, take out th left and right earphones at the sane
tire. When the blue light of th earphones flash, the earphones will enter the
automatic pairing mnode
How to wear headphones correctly
Product Description
Touch Operation
Connect with Bluetooth device
Open the Bluetooth settings option of the Bluetooth device to be paired, enter the options and find the Bluetooth pairing are of the headset MINIS0-X62″ .Click the pang hare to pair.
Indicator Light Description
- When the headset is turned on the blue light flashing
- When the headset is turned off: After the blue light is on, it goes out
- Pairing status. Blue light flashing
- Connection successful. no light
- Headphone Charging: The blue light on the digital display screen of the charging casis always on, ad the blue light on the earphones is always on. After being fully charged, the blue light on the earphones goes out, and at the sane tire, the digital display screen in the charging case goes out.
- Charging of the Charging case
The digital display screen of the charging case flashes, and after being fully charged, the digital display screen of the charging case always lights up at
Power On
Auto power o. The Earphone are taken out of the charging case, the Earphone
will be powered on, with the prompt sound of Du, Mau.al power-on Long press
for 3 seconds, the Earphone will be powered on, with the prompt sound o4 Du.
Power Off
Auto power off Put th Earphone in the charging case, the Earphone will be
powered off, with the prompt sound of D, Mual power off. Long press for S
seconds, the Earphone will be powered off, with the prompt sound of “Du Note
After powering on, if it is not paired with Bluetooth device for 3 minutes, it
will automatically shut down fit is not connected to a Bluetooth device after
minutes, it will automatically power off after 3 minutes, with the prompt
sound of Du.
Once Press
Double Press
Long Press
Wake up voice assistant
When using both ears, press ad hold the left ea multi function button for 2
seconds to activate the voice assistant.
When using one earphone, press ad hold the left (or right) earphonfor seconds
to activate the voice assistant.
Phone mode
Press and hold the left (or right) ear multi-function button for two seconds
call rejection
Triple Press
Switch between game mode and music mode
Note 1. When using one earphone, you cannot switch between gare mode and music
mode
Note 2 The factory setting defaults to music mode
Clear Bluetooth pairing history
When both ears canot be paired, you need to clear all connected devices and clieke the left ad right earphones 5 tires at thesarne tire.
Wireless pairing mode
When there is no pairing record for the left and right earphones, the left ad
right earphones will automatically pair after they are turned on. After
successful paining, there will be two beeps 2When the left and right earphones
have pairing records, they will automatically connect back when they are
turned on, ad the prompt will sound beep.
FCC ID: 2BHJR-X62
FCC Warning:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no uarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
US REP
Company nanee REP Arica LL€
Address 1942 Br0acdwry St. STE 314C,
Boulder, CO 80302, United States
Contact Person. Ben Xu
Email: d.zeng@rep-rope.de
Contact hone (719) 201.3314
The above guarantee does not apply to the following situations
- The validity period of the three guarantees has exceeded,
- Altering of the warranty cards and product code do not match theproduct itself;
- Failure of damages caused by misuse, abuse or improper transportation, use, maintenance or storage
- Failure of danags caused by force majeure (such as earthquake, war, fire, etc) or accident,
- Zippers and tower buckles are damaged due to excessive force;
- 0ff.4lee or tear caused by overloading
- Ary darn.age caused by sharp objects;
- Products with signs of burn darn.age or water logging,
- Drage caused by unauthorized dismantling ad modification,
- Aging, discoloration, wear, cracking and other losses that occur during normal us of the product.
- If fthe product’s original logo or label is changed or damaged this warranty will be invalid
The completeness and appearance of the product and accompanying materials are not covered by the warrant. You should inspect the product on site when receiving it and raise objections to any discrepancies.
MINISO Prodict service policy
fyou encounter a problem, please contact our customer rvice to solve ft After.sales email- 7@hifi.earphone.com
Warranty Policy
Disclaimer
Thi4 manual does not come with an form of warranty,position expression or
other implication. The products, specifications ad information mentioned
inthis manual are for reference only, and the content will be updated on the
website at any tire without prior notice Warranty statement:
The following guarantee is made for the products attached to this document f
the product is damaged due to quality defects under normal use within
twelve12) months from the date of your purchase (th Warrant Period), ad if it
can be repaired, it will be repaired free of charge If th manufacturer
confirms thart it cannot be repaired, it will be replaced free of charge; the
repaired product will continue to be covered by the warranty for the remaining
warranty period(a minimum of not less tha 30 drys. The purchase date shall be
based on the sales inwoice date if the purchase date cot be determined,the
warranty period shall be calculated as thirteen(13) months from the product
production date.
you want to apply for warranty, please call the product service hotline first
and follow our instructions. Whee applying for a warranty you are rquired to
provide a valid sales invoice that is accurate, comp/et and clearly filled
out.
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth headset.If the user makes modifications or modifications to this Bluetooth headset without permission, the user will lose the right to continue to 0joy the services included in the device Electromagnetic interference
- Electronic devices To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device in accordance with regulations in places with clear instructions Civil Aviation After boarding the plane, pleas turn off your Blue-tooth headset according to the flight attendant’s instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft orenunication system.
- safety matters
Placement. It is recommended that when you are not using the Bluetooth headset, place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury Children.Do not let children play with Blutooth headsets.Some of the small parts are detachable and mary be swallowed and cause danger.
Important safety tips
-
Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
-
This product contains a built-in rechargeable battery, It is prohibited to hit, squeeze, Puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation,bulging,or leajage, please stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as the sun,heaters.
or stoves. After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight or other high-temperature and high- pressure environment to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one.However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type. battery usage. -
After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
-
During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
-
When charging, please use a charging device with an output voltage of DC SV/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause The battery is damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
MINISO
Product warranty card
Product number| | SN number|
---|---|---|---
User info| name| | Purchase date|
telephone|
address|
Invoice number|
Sales unit information| name| (stamp)
address|
telephone|
Enjoy the company of MINIS
Copyright@2024 MINISO Group affiliated
companies and its licensors. All rights reserved
Documents / Resources
|
MINISO X62 Wireless
Earbud
[pdf] User Manual
2BHJR-X62, 2BHJRX62, X62 Wireless Earbud, X62, Wireless Earbud, Earbud
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>