MINISO X29 Wireless Earbud Owner’s Manual
- June 1, 2024
- MINISO
Table of Contents
PRODUCT MANUAL
Wireless Earbud X29
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE
PRODUCT AND KEEP IT IN A SAFE PLACE.
Welcome to MINISO
Clip on wireless earphones
Take out and pair it
X29 Wireless Earbud
When using for the first time, take out the left and right earphones at the same time. When the white light and ice blue light of the earphones flash alternately, the earphones will enter the automatic pairing mode.
How to wear headphones correctly
|
---|---
|
Product Description
|
---|---
Specification of Product
Model of Product: X29
Version: V5.4
Effective Distance: Approx. 10m
Speaker Diameter: Φ13.2mm
Impedance: 16Ω
Frequency Respinse: 20Hz-20KHz
Microphone Sensitivity: -42dB+3dB
Earphone Input: 5V 30mA
Charging Case Input: 5V 350mA
Charging Case Output: 5V 60mA
Earphone Battery Capacity: 30mAh
Charging Case Battery Capacity: 350mAh
Duration: Approx. 3.5 H (Earphone)
Earphone Charging Time: Approx. 1 H
Charging Time of the Charging Case: Approx. 1.5 H
Touch Operation
Connect with Bluetooth device
Open the Bluetooth settings option of the Bluetooth device to be paired, enter the options and find the Bluetooth pairing name of the headset “MINISO-X29″.Click the pairing name to pair.
Indicator Light Description
-
When the headset is turned on: the white light and the ice blue light flash alternately
-
When the headset is turned off: the white light flashes 3 times quickly and then goes out
-
Pairing status: white light and ice blue light flash alternately
-
Connection successful: no light
-
Headphone Charging: The charging case display screen shows the battery level, and when fully charged, the charging case screen shows 100%
-
Charging of the Charging case: The charging case display screen shows the battery level, and when fully charged, the charging case screen shows 100%
*Note: After the charging status is displayed on the display screen of the charging compartment, it will automatically turn off after about 15 seconds of inactivity. Sliding can enter the display screen.
Power On
Auto power on: The Earphone are taken out of the charging case, the Earphone
will be powered on, with the prompt sound of “Du”. Manual power-on: Long press
for 3 seconds, the Earphone will be powered on, with the prompt sound of “Du”.
Power Off Auto power off: Put the Earphone in the charging case, the Earphone
will be powered off, with the prompt sound of “Du”.
Manual power off: Long press for 5 seconds, the Earphone will be powered off,
with the prompt sound of “Du”.
Note: After powering on, if it is not paired with a Bluetooth device for
3 minutes, it will automatically shut down; If it is not connected to a
Bluetooth device after 3 minutes, it will automatically power off after 3
minutes, with the prompt sound of “Du”. “
Once Press
| Music mode | Phone mode |
|---|---|
| Play/Pause | Call Answer/End |
Double Press
Music Mode
| Double press the right ear: Volume up
---|---
| Double press the left ear: Volume decreases
Long Press
| Wake up voice assistant
When using both ears, press and hold the left ear multi-function button for 2
seconds to activate the voice assistant. When using one earphone, press and
hold the left (or right) earphone for 2 seconds to activate the voice
assistant
---|---
| Phone mode
Press and hold the left (or right) ear multi-function button for two seconds:
call rejection
Triple Press
Music mode
| Triple press on the left ear: Previous song
---|---
| Triple press on the right ear: next song
*Note: When using one ear, when you click the left (or right) earphone triple-clicking, it will be the next song.
Clear Bluetooth Pairing history
When both ears cannot be paired, you need to clear all connected devices and
click the left and right earphones 5 times at the same time.
Wireless pairing mode
- When there is no pairing record for the left and right earphones, the left and right earphones will automatically pair after they are turned on. After successful pairing, there will be two beeps.
- When the left and right earphones have pairing records, they will automatically connect back when they are turned on, and the prompt will sound “beep”
Switch between game mode and music mode (Mono/Binaural operation)
| Game mode
Press and hold the multi-function button on the right ear for 2 seconds
---|---
| Music mode
Press and hold again for 2 seconds
Note 1: When using one earphone, you cannot switch between game mode and
music mode.
Note 2: The factory setting defaults to music mode
Charging compartment operation
Lighting up the display screen
Method 1: Open the charging compartment cover and the display screen will
automatically light up.
Method 2: When the screen is off, click on the display screen to turn it
on.
Turn off display screen.
Automatic shutdown: After turning on the screen for 30 seconds without
operation, the display screen will automatically turn off.
Manual closing: Close the charging compartment cover and the display
screen will turn off.
Lock screen function: Swipe the screen from top to bottom, pop up the lock
screen interface, click the lock screen flag to lock the screen and close it.
Note 1: First time use, please activate power on
Operation method: Charge and activate the charging compartment through
the
TYPE-C interface.
Tip: This product defaults to shutdown mode when it leaves the factory,
and it needs to be activated and turned on by charging for the first time.
Note 2: In the case of a stuck charging compartment, in non charging
mode, press and hold the Reset button at the bottom for 1 second to forcibly
restart the charging compartment.
Icon Intorduction
Bluetooth status
White status: The charging compartment is not connected to the headphones
Green status: The charging compartment is connected to the earphones, but the
earphones are not connected to the phone
Blue status: The charging compartment is connected to the headphones, and the
headphones are connected to the phone.
Connection prompt
No.1: This interface represents the use of this function, which requires the
charging compartment to be connected to the headphones.
No.2: This interface represents the use of this feature, which requires
headphones to be connected to Bluetooth devices on the phone or computer.
Battery status
Charging status indicator icon for the charging compartment
Green: Charging in progress
Blue: fully charged
Red: Low battery
White: Normal battery level, not charging
Headphone charging status indicator icon
Green: The earphones are charging in the charging compartment
Blue: fully charged
White: The headphones are not charging
Lock screen interface Unlock: Slide to the right to unlock the screen
Music interface
Volume adjustment interface
| Reduce volume, minimum music is 0
---|---
| ncrease volume, maximum volume is 16
Equalizer interface
Switch between different EQ sound effects: Standard, Rock, Pop, Classic, Jazz
Space sound interface Alarm setting interface Switching requires setting the alarm time: 5 minutes, 10 minutes, 30 minutes, 60 minutes
Brightness setting interface Click the left button to decrease the screen brightness; Click the button on the right to increase screen brightness
Language switching interface Click to switch languages from different countries
Wallpaper switching interface
Click to switch between different lock screen wallpapers, the current screen is the selected lock screen wallpaper
Find the headphone interface
Click the L/R button, and the number ‘3: screen will appear
Click to cancel and exit this function, Click to start, the number ‘4) screen
will appear, and the headphone speaker will start emitting sound
Click the stop button to stop speaking
Flashlight interface
Click the button to turn on the
flashlight, the entire screen turns white and the brightness of the screen
increases
Time setting interface
Automatic update: When the charging compartment, headphones, and phone are
connected, the time on the phone will be automatically updated to the charging
compartment
Manual update: Click the button to enter manual settings
Reset interface
| Restart the charging compartment
---|---
| Two earphones are in the charging compartment.
Open the cover and click this icon to form a team connection between the
earphones.
Then, the charging compartment will automatically form a team connection with
the earphones
| Disconnect the earphones from the phone and clear the connection record
Incoming call interface
Lock Screen
| In the unlocked state, slide down on the main interface to pull out this
interface,
Click this icon, the screen will turn off, and if you do not click the icon,
swipe upwards to exit this interface.
---|---
Tiktok Page flipping and like function
This function is only available for use with TIKTOK software, and other
software may not be able to use it.
This feature may have compatibility issues with some phones, and some phones
may not be able to use it. Click this icon, the current short video will be
liked
| Clicking on this icon will switch to the previous short video
---|---
| Clicking on this icon will switch to the next short video
Photography function
This function is only available for taking photos with the built-in camera of
the phone. Other shooting software may not be able to use it.
This feature may have compatibility issues with some phones, and some phones
may not be able to use it.
Open the phone camera, click the button, and the phone will start taking
photos
Item List
|
---|---
|
FCC ID: 2A83K-X29
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
US REP| Company name: UUX GROUP INC
Address: 36 South 18th Avenue, Suite A Brighton, CO USA 80601
Contact Person: Jack Fu
Email: uuxforever@outlook.com
Contact Phone: 213-375-3998
---|---
Warranty statement
MINISO product warranty card
Product number| | SN number|
---|---|---|---
User info| name| | Purchase date|
telephone|
address|
Invoice number|
Sales unit
information| name| (stamp)
address|
telephone|
The above guarantee does not apply to the following situations
- The validity period of the three guarantees has exceeded;
- Altering of the warranty cards and product code do not match the product itself;
- Failure of damages caused by misuse, abuse or improper transportation, use, maintenance or storage;
- Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
- Zippers and tower buckles are damaged due to excessive force;
- Off-line or tear caused by overloading;
- Any damage caused by sharp objects;
- Products with signs of burn damage or water logging;
- Damage caused by unauthorized dismantling and modification;
- Aging, discoloration, wear, cracking and other losses that occur during normal use of the product.
- If the product’s original logo or label is changed or damaged, this warranty will be invalid.
The completeness and appearance of the product and accompanying materials are
not covered by the warranty. You should inspect the product on site when
receiving it and raise objections to any discrepancies.
Service supervision hotline:
400-812-0102
MINISO Prodict service policy
If you encounter a problem, please contact our customer service to solve
it.
After-sales email: 7@hifi-earphone.com
Warranty Policy
Disclaimer:
This manual does not come with any form of warranty, position expression or
other implication. The products, specifications and information mentioned in
this manual are for reference only, and the content will be updated on the
website at any time without prior notice.
Warranty statement:
The following guarantee is made for the products attached to this document: If
the product is damaged due to quality defects under normal use within
twelve(12) months from the date of your purchase (the “Warranty Period”), and
if it can be repaired, it will be repaired free of charge; If the manufacturer
confirms that it cannot be repaired, it will be replaced free of charge; the
repaired product will continue to be covered by the warranty for the remaining
warranty period(a minimum of not less than 30 days). The purchase date shall
be based on the sales invoice date; if the purchase date cannot be determined,
the warranty period shall be calculated as thirteen(13) months from the
product production date.
If you want to apply for warranty, please call the product service hotline
first and follow our instructions. When applying for a warranty, you are
required to provide a valid sales invoice that is accurate, complete and
clearly filled out.
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth
headset. If the user makes modifications or modifications to this Bluetooth
headset without permission, the user will lose the right to continue to enjoy
the services included in the device
-
Electromagnetic interference:
Electronic devices : To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device in accordance with regulations in places with clear instructions.
Civil Aviation: After boarding the plane, please turn off your Bluetooth headset according to the flight attendant’s instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft communication system. -
Safety matters:
Placement: It is recommended that when you are not using the Bluetooth headset, place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury.
Children: Do not let children play with Bluetooth headsets. Some of the small parts are detachable and may be swallowed and cause danger.
Important safety tips
-
Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
-
This product contains a built-in rechargeable battery, It is prohibited to hit, squeeze, Puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leajage, please stop using it. Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or in high-temperature or high-pressure environments such as the sun, heaters, or stoves. After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight or other high-temperature and high-pressure environment to avoid damage to the earphones and battery. The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one.
However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type. battery usage. -
After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification. Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
-
During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
-
When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification. Do not use a fast-charging charger to avoid excessive battery load, which may cause The battery is damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
Enjoy tje company of MINISO
Copyright@2024 MINISO Group affiliated
companies and its licensors. All rights reserved
Creating sound to live with
Documents / Resources
|
MINISO X29 Wireless
Earbud
[pdf] Owner's Manual
X29 Wireless Earbud, X29, Wireless Earbud, Earbud
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>