MINISO SX211 Lipstick TWS Earphones User Manual

USER MANUAL
Barbie Shining Collection
Lipstick TWS Earphones
MODEL: SX-211
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE
PRODUCT AND KEEP IT PROPERLY

Cautions

1. Reasonable control of the volume and time of usage is required to avoid hearing damage.
2. For your safety, do not use in potentially hazardous condition.
3. Do not listen to music, call up or answer the phone while driving to avoid danger caused by distraction.
4. Keep out of reach of children to avoid danger caused by improper use.
5. Do not throw to avoid damage caused by dropping.
6. Do not store it under 0°C or above 40°C to avoid shortening the lifespan of earphones and battery.
7. Do not modify, disassemble and repair the product.
8. lrreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by professional institute. Do not throw away or toss it into fire.
9. When not in use for a long time, charge the earphones once every 3 months to extend its service life.

Parameters

BT Version : 5.3
BT Name: MINISO SxX-211
Charging Port : USB-C
Earphone Battery Capacity: 35mAh
Music Playback Time: 4-4.5h
Charging Time: 1.5h
Transmission Distance: 10m
Charging Case Battery Capacity: 280mAh

Product Structure

1. Right Earphone
2. Touch Button
3. Audio Receiving Hole
4. Left Earphone
5. Charging Case

Accessories

Device1, User Manual1, USB-C Charging Cable*1

Usage

earphones enter into pairing mode automatically. Search for MINISO SX-211 and choose to connect, there is a prompt after the earphones are connected successfully. The next time you turn on, the earphones will connect automatically with the last device.
Manual Pairing| /
| Earphones Instructions
Play/Pause| Press one of the earphones once
Next Track| Press one of the earphones twice
Previous Track| Press one of the earphones three times
Answer/End Call| Press one of the earphones twice
Reject Call| Long press one of the earphones
Activate Phone’s Voice Assistant| Long press left earphone
Gaming Mode| Long press right earphone
Indicator Light| Charging: white light blinks slowly
Fully Charged: white light constantly on Low Battery: white light blinks rapidly

Troubleshooting

1. Wireless earphones fail to be paired with the phone.
   Solution: Check if the earphones are in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove earphones from the list, follow the instructions of user manual to pair the earphones with your phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.

3. Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

4. The wireless earphones got disconnected with the phone within 10 meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.

5. Cannot hear audio playing when the earphones are connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

6. Can | operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones due to their settings.

IC Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC Warning

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help,

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>