RC 82289 RAM 2019 24 LED Ditch Light Kit Installation Guide

September 27, 2024
RC

82289 RAM 2019 24 LED Ditch Light Kit

“`html

Product Specifications:

  • Model: RAM 2019-24 1500 Ditch Mount

  • Kit Contents: 1 – Driver Side Bracket, 1 – Passenger Side
    Bracket

  • Tools Required: 13mm Wrench

Product Usage Instructions:

Installation Instructions:

  1. Remove the hood nuts with a 13mm wrench. Retain hardware for
    reuse. See Photo 1.

  2. Place the bracket on the hood studs and secure with factory
    hood nuts. Tighten with a 13mm wrench. See Photo 2.

  3. Repeat for the other side.

  4. Install the light to the bracket using the hardware that came
    with the light. Ensure the bolt head is towards the hood as shown.
    See Photo 3.

Post Installation Instructions:

  1. Check all fasteners for proper torque.

  2. Ensure adequate clearance between all rotating, mobile, fixed,
    and heated members.

  3. Verify clearance between exhaust and brake lines, fuel lines,
    fuel tank, floorboards, and wiring harness.

  4. Perform light check and adjustment to proper settings.

  5. Retighten all kit components at 500 miles and then every 300
    miles after installation.

  6. Periodically check all hardware for tightness.

Frequently Asked Questions (FAQ):

Q: What torque specs should I follow when installing the

brackets?

A: Refer to the provided torque specifications based on the size
and grade of the bolts used.

Q: How often should I check the hardware tightness after

installation?

A: It is recommended to periodically check all hardware for
tightness and retighten all kit components at specific intervals as
mentioned in the post-installation instructions.

“`

921822880

RAM 2019-24 1500 Ditch Mount
Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.

KIT CONTENTS: 1 – Dr. Side Bracket 1 – Pass. Side Bracket

Tools Required: 13mm Wrench

Torque Specs:

Size 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″
3/4″

Grade 5 15 ft/lbs 30 ft/lbs 45 ft/lbs 65 ft/lbs 95 ft/lbs 135ft/lbs
185ft/lbs

Grade 8 20ft/lbs 35ft/lbs 60ft/lbs 90ft/lbs
130ft/lbs 175ft/lbs
280ft/lbs

Size 6MM 8MM 10MM 12MM 14MM 16MM
18MM

Class 8.8 5ft/lbs
18ft/lbs 32ft/lbs 55ft/lbs 85ft/lbs 130ft/lbs
170ft/lbs

Class 10.9 9ft/lbs
23ft/lbs 45ft/lbs 75ft/lbs 120ft/lbs 165ft/lbs
240ft/lbs

INSTALLATION INSTRUCTONS

1. Remove the hood nuts with a 13mm wrench. Retain hardware for reuse. See Photo 1. 2. Place the bracket on the hood studs and secure with factory hood nuts. Tighten with a 13mm wrench. See Photo 2.

Photo 1

Photo 2

Remove hood nuts.

Install bracket.

3. Repeat for other side. 4. Install the light to the bracket using the hardware that came with the light. Be sure the bolt head is towards the hood
as shown. See Photo 3.

Photo 3

Install light.
POST INSTALLATION INSTRUCTIONS 1. Check all fasteners for proper torque. Check to ensure for adequate clearance between all rotating, mobile, fixed,
and heated members. Verify clearance between exhaust and brake lines, fuel lines, fuel tank, floorboards, and wiring harness. 2. Perform light check and adjustment to proper settings. 3. All kit components must be retightened at 500 miles and then every 300 miles after installation. Periodically check all hardware for tightness.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals