GTW8103 Rugged Windows Tablet

“`html

Product Information

Specifications:

• Model: GTW8103

• SKU Options: Standard, Handle, RJ45A, RJ45AH

• Expansion Accessories: Varies based on SKU

• Connectivity: USB 3.2 Type-C, MicroSD card slot, HDMI, USB 3.2
  Type-A, RJ45, SIM slot

• Power: Battery operated with power indicator

• Features: Front and rear cameras, brightness control, volume
  control, stylus, speaker

Product Usage Instructions:

Installation and Removal of Battery:

Install Battery:

1. Make sure that the middle buckle is unlocked to the left.

2. Insert the battery into the connector from the left side and
   press down.

3. Push the middle buckle to the right to lock it.

Remove Battery:

1. Make sure that the middle buckle is unlocked to the left.

2. Unlock the long lock upward, and the battery automatically
   springs up.

3. From the right side, flip the battery up and remove it.

Configuration Differences:

The GTW8103 series has 4 SKUs with differences in expansion
accessories:

• Standard: No additional accessories
• Handle: Includes a handle
• RJ45A: Includes RJ45+USB 2 in 1 module
• RJ45AH: Includes RJ45+USB 2 in 1 module and handle

Frequently Asked Questions (FAQ):

Q: What are the main differences between the GTW8103 SKUs?

A: The main differences lie in the expansion accessories
included with each SKU. Standard has no additional accessories,
Handle includes a handle, RJ45A includes an RJ45+USB 2 in 1 module,
and RJ45AH includes both the RJ45+USB 2 in 1 module and a
handle.

Q: How do I know which SKU I have?

A: You can identify your SKU based on the additional accessories
mentioned in the product appearance section of the user manual.

“`

Quick Start Guide
GTW8103

SKU1 : GTW8103(Standard)

Appearance

Front camera Front camera indicator Light sensor Turn on the rear camera flash Volume down Volume up Brightness down Brightness up Home Power indicator Hard disk indicator Battery indicator 35 pogopins Power

Rear View

Heat emission hole Fan Rear camera&Flash Battery Stylus Speaker Optional: 4G Module
Built-in: SIM Slot

Left Side View

Right Side View
DC charging Type-C Charging USB 3.2 Type-C MicroSD card slot HDMI USB 3.2 Type-A USB 3.2 Type-A

Install a SD Card SD Card Slot

SKU2 : GTW8103(Handle)

Appearance

Front camera Front camera indicator Light sensor Turn on the rear camera flash Volume down Volume up Brightness down Brightness up Home Power indicator Hard disk indicator Battery indicator 35 pogopins Power Handle

Rear View

Heat emission hole Fan Rear camera&Flash Battery Stylus Speaker
Optional: 4G Module
Built-in: SIM Slot

Left side view

Right side view
DC charging Type-C Charging USB 3.2 Type-C MicroSD card slot HDMI USB 3.2 Type-A USB 3.2 Type-A

Install a SD card SD Card Slot

SKU3: GTW8103(RJ45A)

Appearance

Front camera Front camera indicator Light sensor Turn on the rear camera flash Volume down Volume up Brightness down Brightness up Home Power indicator Hard disk indicator Battery indicator 35 pogopins Power

Rear View

Heat emission hole Fan Rear camera&Flash Battery RJ45+USB2.0 Stylus Speaker
Optional: 4G Module
Built-in: SIM Slot

Left Side View

Right Side View
DC charging Type-C Charging USB 3.2 Type-C MicroSD card slot HDMI USB 3.2 Type-A USB 3.2 Type-A

Install a SD Card SD Card Slot

SKU4 : GTW8103(RJ45AH)

Appearance

Front camera Front camera indicator Light sensor Turn on the rear camera flash Volume down Volume up Brightness down Brightness up Home Power indicator Hard disk indicator Battery indicator 35 pogopins Power Handle

Rear View

Heat emission hole Fan Rear camera&Flash Battery RJ45+USB2.0 Stylus Speaker Optional: 4G Module
Built-in: SIM Slot

Left side view

Right side view
DC charging Type-C Charging USB 3.2 Type-C MicroSD card slot HDMI USB 3.2 Type-A USB 3.2 Type-A

Install a SD card SD Card Slot

Install Battery

Step 1 Make sure that the middle buckle is unlocked to the left

Step 2 Insert the battery into the connector from the left side
and press down

Step 3 Push the middle buckle to the right to lock it

Remove Battery

Step 1

Step 2

Make sure that the middle buckle is unlocked to the left Unlock the long lock upward, and the battery

automatically springs up

Step 3 From the right side, flip the battery up and remove it

Configuration differences of GTW8103 series: There are 4 SKUs in total. The main difference is expansion accessories.

Optional Accessory

SKU1 GTW8103(Standard)
NA

SKU2 GTW8103(Handle)
Handle

SKU3 GTW GTW8103(RJ45A)
RJ45+USB 2 in 1 module

SKU4 GTW8103(RJ45AH)
RJ45+USB 2 in 1 module + Handle

Picture

SKU1: Only the host. SKU2: Host with handle. SKU3: Host with RJ45+USB 2 in 1 module. SKU4: Host with handle and RJ45+USB 2 in 1 module.

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This Rugged Windows Tablet meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: GTW8103(Standard) (FCC ID: 2A96I-GTW8103) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 1.387W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt- clips,

holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>