Pro-Ject T1EVO BT Bluetooth Turntable User Guide
- September 27, 2024
- Pro-Ject
Table of Contents
T1EVO BT Bluetooth Turntable
“`html
Specifications:
- Model: T1 EVO
- Speeds: 33 RPM, 45 RPM
- Connectivity: RCA Cable, Line Out, Phono Out
- Included Accessories: Drive belt, Stylus pressure gauge,
Adapter for 7 singles, Allen key, Power supply
Product Usage Instructions:
Setup Guide:
-
Remove dust cover from the box.
-
Take the small boxes from the carton.
-
Unpack all items.
-
Lift the wrapped turntable out of the box. Remove the
protection covering. -
Unpack the felt mat and the platter from the bottom of the
packaging.
-
Connect the E (RCA cable) – Detachable cable only included with
T1 EVO Phono & BT -
Put the drive belt on the pulley & sub-platter. Beware of
breaking the stylus! -
Put the platter & felt mat on the turntable. Remove the
protective tonearm inlays. -
Remove tonearm twist tie.
-
Connect to your hifi-system and enjoy your music! Remove stylus
protector before playback!
How to Connect:
T1 EVO: Connect to any amp with integrated
phono amplifier or use an external phono preamp. Pre-mounted
Connect it E (RCA cable) included. Possible set: Pro-Ject Speaker
Box 5 S2 (bookshelf speaker) and Pro-Ject MaiA S3 (stereo
integrated amplifier).
T1 EVO Phono: Select Line Out to connect to an
amplifier without a phono stage. Select Phono Out if you have an
amplifier with a phono stage. Possible set: Pro-Ject Speaker Box 5
S2 (bookshelf speaker) and Pro-Ject Stereo Box S3 BT (stereo
integrated amplifier).
T1 EVO BT: Use Line Out to connect to an
amplifier without a phono stage. Use Phono Out if you have an
amplifier with a phono stage. Enjoy the warmth of vinyl with the
comfort of wireless technology. Possible set: Pro-Ject Speaker Box
5 S2 (bookshelf speaker) and Pro-Ject Stereo Box S3 BT (stereo
integrated amplifier).
Speed Change:
45 RPM – Speed change on left side.
33 RPM – Connect it E (RCA Cable).
Contact Information:
If you need help, feel free to contact us. Find your dealer
here.
Warranty Information:
The manufacturer accepts no responsibility for damage caused by
not adhering to these instructions for use and/or by transportation
without the original packaging. Modification or change to any part
of the product by unauthorized persons releases the manufacturer
from any liability beyond the lawful rights of the customer.
Faults caused due to using domestic products in commercial
environments or on commercial scales are not covered by warranty.
This turntable is intended for domestic use only. Using them for
business applications is done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H.
Lichtenegger.
The information was correct at the time of going to press.
The manufacturer reserves the right to make changes to the
technical specification without prior notice as deemed necessary to
uphold the ongoing process of technical development.
Qualcomm aptX is a product of Qualcomm Technologies, Inc.
and/or its subsidiaries. Qualcomm is a trademark of Qualcomm
Incorporated, registered in the United States and other countries.
aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries.
FAQ:
Q: What should I do if my turntable does not power on?
A: Make sure all connections are secure and check if the power
supply is functioning correctly.
Q: How do I clean my stylus?
A: Use a stylus brush or cleaning solution specifically designed
for stylus maintenance.
Q: Can I use my T1 EVO in a commercial setting?
A: No, this turntable is intended for domestic use only.
Commercial use may void the warranty.
“`
T1 EVO Setup Guide
Getting started:
· Make sure to have enough space to unpack your turntable.
· Always unpack and set up in a clean enviroment.
· Please Do NOT throw away the packaging! If you need a service or want to
return your product, please send them in the original packaging including all
inserts. In case of any damage in another packaging your dealer cannot
guarantee a full refund.
· Complete manual: https://www.project-audio.com/en/product/t1-evo
1 Remove dust cover from the box.
2 Take the small boxes from the carton.
3 Unpack all items.
c)
a) b)
d) e) f)
4 5 Lift the wrapped turntable out of the box.
Remove the protection covering.
6 Unpack the felt mat and the platter from the bottom of the packaging.
a) Connect it E (RCA cable)
Detachable cable only included with T1 EVO Phono & BT
b) Drive belt c) Stylus pressure gauge d) Adapter for 7″ singles e) Allen key
f) Power supply
7 Put the drive belt on the pulley & sub-platter.
Beware of breaking the stylus!
8 9 Put the platter & felt mat on the turntable.
Remove the protective tonearm inlays.
10 Remove tonearm twist tie.
11 Connect to your hifi-system and enjoy your music!
Remove stylus protector before playback!
How to connect your model and possible setups:
T1 EVO
Connect to any amp with integrated phono amplifier or use an external phono
preamp. Pre-mounted Connect it E (RCA cable) included. Possible set: Pro-Ject
Speaker Box 5 S2 (bookshelf speaker) and Pro-Ject MaiA S3 (stereo integrated
amplifier).
T1 EVO Phono
Select Line Out to connect to an amplifier without a phono stage. Select Phono
Out if you have an amplifier with a phono stage. Possible set: Pro-Ject
Speaker Box 5 S2 (bookshelf speaker) and Pro-Ject Stereo Box S3 BT (stereo
integrated amplifier).
T1 EVO BT
Use Line Out to connect to an amplifier without a phono stage. Use Phono Out
if you have an amplifier with a phono stage. Enjoy the warmth of vinyl with
the comfort of wireless technology. Possible set: Pro-Ject Speaker Box 5 S2
(bookshelf speaker) and Pro-Ject Stereo Box S3 BT (stereo integrated
amplifier).
45 RPM
Speed change on left side. 33 RPM
Connect it E (RCA Cable)
Speaker cable
Speaker cable
Connect it E (RCA Cable)
Speaker cable
Speaker cable
Connect it E (RCA Cable)
Speaker cable
Speaker cable
T1 EVO
Need help?
Feel free to contact us. We have experienced partners all over the world. Find
your dealer here:
www.project-audio.com/en/find-a-dealer/
Service Should you encounter a problem which you are not able to alleviate or
identify despite the above information, please contact your dealer for further
advice. Only when the problem cannot be resolved there should the unit be sent
to the responsible distributor in your country. Warranty repairs will only be
affected if the unit is returned correctly packaged. For this reason we
recommend keeping the original packaging. Never return a record player without
making sure that is it safely disassembled and correctly packaged in the
original packaging. Please remove these parts and pack them separately: lid,
counterweight, anti-skating weight and belt. Fit the cartridge protection cap
and the transport lock for the tonearm tube, prior to carefully packaging the
record player.
Warranty The manufacturer accepts no responsibility for damage caused by not
adhering to these instructions for use and/or by transportation without the
original packaging. Modification or change to any part of the product by
unauthorized persons, release the manufacturer from any liability over and
above the lawful rights of the customer.
Warranty: Terms and Conditions · A warranty is valid only for products
purchased from an authorized Pro-Ject Audio Systems retailer or dealer. · This
warranty offer is limited to the repair of the equipment (which could be a
repair or replacement at our discretion, neither of which affects
your original warranty). · Neither transportation or any other costs, nor any
risk for removal, transportation and installation of products is covered by
this warranty. · A warranty is only valid for the original owner. It is not
transferable. · To validate your warranty, you will need to provide the
original sales invoice or other proof of ownership and date of purchase. ·
Warranty must be claimed within two years of purchase from an authorized
dealer. After this period of time, the warranty will expire. · The legal
warranty obligation exists in addition to this warranty and is not limited by
this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials
and/or workmanship at the time of purchase. It does not cover: · Deterioration
of component parts, the nature of which is to become worn or depleted with
use, such as batteries and headphone ear pads,
drive belts and cartridges.
· Damages caused by incorrect installation, connection or packing. · Damages
caused by any use other than the correct use described in the user manual,
negligence, modifications, or use of parts that are not
made or authorized by Pro-Ject Audio Systems. · Damages caused by faulty or
unsuitable ancillary equipment. · Damages caused by accidents, lightning,
water, fire heat, war, public disturbances or any other cause beyond the
reasonable control of
Pro-Ject Audio Systems and its appointed distributors. · Products where the
serial number has been altered, deleted, removed or made illegible. · Repairs
or modifications that have been executed by an unauthorized person.
Commercial Use Faults caused due to using domestic products in commercial
environments or on commercial scales are not covered by warranty. This
turntable is intended for domestic use only. Using them for business
applications are done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems Copyright © 2024. All
rights reserved.
The information was correct at the time of going to press. The manufacturer
reserves the right to make changes to the technical specification without
prior notice as deemed necessary to uphold the ongoing process of technical
development.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in
the United States and other countries. aptX is a trademark of Qualcomm
Technologies International, Ltd., registered in the United States and other
countries.
SG036
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>