6273LM EchoDome Speaker

Product Information: EchoDome Speaker-6273LM

Specifications:

• Input: 5V, 1A
• Battery: 1 x 18650 1800mAh
• Bluetooth speaker: 4.5W
• Charging time: 3-4 hours
• Working time: approx. 3 hours (High mode)
• Light source: 20pcs SMD2835
• Light modes: Low-Medium-High-Off
• USB-C cable length: 19.7 inches (50cm)
• Size: Dia4.65 x 8.66 inches (Dia118x220mm)
• Weight: 0.73lbs (330g)

Product Parts:

• 1 x EchoDome Speaker
• 1 x USB-C cable

Charging EchoDome Speaker:

1. Insert the USB-C end of the provided charging cable into the
   charging port located on the bottom of the EchoDome Speaker.

2. Insert the other end into any USB power source (USB adapter,
   power bank, etc.).

3. The battery indicator light will light up red, indicating
   charging is in process.

4. It will take approximately 3-4 hours to fully charge your
   EchoDome Speaker.

5. Once the unit is fully charged, the battery indicator light
   will turn off.

Connecting to Bluetooth:

1. Press and hold the Bluetooth button to turn on the unit’s
   Bluetooth. A chime will sound, and the unit will enter Bluetooth
   mode.

Lamp Functions:

1. Tap the Touch Sensor on the top of the lamp to turn the Warm
   light on Low.

2. Keep tapping to select Warm light Medium, Warm light High, OFF,
   and back to Warm light Low.

FCC Statement:

The EchoDome Speaker complies with FCC regulations.

FAQ:

Q: How do I reset my EchoDome Speaker?

A: To reset your EchoDome Speaker, press and hold the power
button for 10 seconds until you hear a beep.

Q: Can I use the EchoDome Speaker while it is charging?

A: Yes, you can use the EchoDome Speaker while it is charging.
However, it is recommended to unplug it for outdoor use to avoid
damage from moisture.

User manual for EchoDome Speaker-6273LM

Specifications
Input: 5V,1A Battery: 1 x 18650 1800mAh Bluetooth speaker: 4 5W Charging time: 3-4 hours Working time: approx. 3 hours(High mode) Light source: 20pcs SMD2835 Light: Low-Medium-High-Off USB-C cable: 19.7inches(50cm) Size: Dia4.65 x 8.66 inches(Dia118x220mm) Weight: 0.73lbs(330g)

Product part:
1xProduct

1xUSB-C cable

CHARGING ECHODOME SPEAKER
1. Insert the USB-C end of the provided charging cable into the charging port located on the bottom of the EchoDome Speaker. Insert the other end into any USB power source (USB adapter, power bank, etc.). See picture as below.
2. The battery indicator light will light up red, indicating charging is in process. 3. It will take approximately 3-4 hours to fully charge your EchoDome Speaker. 4. Once the unit is fully charged, the battery indicator light will turn off.
CONNECT TO BLUETOOTH
1. Press and hold the bluetooth button to turn on the unit’s Bluetooth. Chime will sound

and the unit will enter Bluetooth mode. See picture as below.
2. Turn your phone’s Bluetooth function by accessing the Settings menu. Select “BELL+HOWELL BY DESIGN”from the Bluetooth device list and connect to it. Once connected, the chime will sound. 3. You will be able to control the sound, volume, etc. through your phone. Play music through this Bluetooth speaker. 4. Once the EchoDome Speaker has been successfully paired to your phone, it will automatically pair up the next time the unit is on. 5. If you need to pair the EchoDome Speaker to a different phone, you have to disconnect from the current phone and repeat the pairing process for the new phone. If the phone’s Bluetooth is turned off and then turned on again, you need to re- connect to product manually. 6. Turn off the Bluetooth by pressing and holding the bluetooth button.
LAMP FUNCTIONS
Tap the Touch Sensor on the top of the lamp to turn the Warm light on Low. See picture as right. Keep tapping to select Warm light Medium, Warm light High, OFF and back to Warm light Low.

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>