PopuMusic T1 36 Inch Popular Smart Guitar Kepma Co-Brand Edition User Manual
- June 5, 2024
- PopuMusic
Table of Contents
PopuMusic T1 36 Inch Popular Smart Guitar Kepma Co-Brand
Edition
Connect to the Populele via Bluetooth
- Download the “PopuMusic” APP in the APP/Google Store, install it and enable Bluetooth on your phone.
- Press the power button at the back of Poputar. If the LED lights flash in a dazzling mode, the Poputar has started up successfully.
- Open the “PopuMusic” APP, complete the registration and log in.
- Tap the icon of Bluetooth connection and wait. If the Poputar is found, a small guitar icon will appear on the screen.
- Tap the small guitar icon, then “Connected successfully” will pop up, which indicates that the Poputar is connected via Bluetooth successfully.
- After successful connection, the lights on the fret board stop flashing and the awaiting position continuously illuminates. You can then start to play!
Common Problems
What should you do when the Bluetooth connection fails?
- Make sure you connect via Bluetooth in the “PopuMusic” APP or through the Bluetooth screen of your phone.
- Make sure that the Poputar has started up. Press the button at the back of a Poputar to start it up. When the Poputar is not connected via Bluetooth, the LED lights on the fretboard flash in a dazzling mode. After successful connection via Bluetooth, the awaiting position continuously illuminates.
- The power of the batteries may be used up. Please change them with new ones.
- Please allow PopuMusic App access to the GPS, Microphone permissions of your phone or device.
What should you do when the APP cannot recognize or inaccurately recognize during operation?
- Check whether or not “Allow APP to record” is enabled in the settings of your phone.The APP can recognize only after this function is enabled.
- Strings may be not accurate. Please tune up strings and play again.
- Sound recognition of the Poputar is completed by the sound pickup element of your phone. If the playing environment is noisy, the accuracy of recognition will be affected,please try again in another place.
Notices:
- Do not place the Poputar in damp places or near radiators. Protect the Poputar from insolation to prevent deformation of the neck or cracks on the soundboard.
- Do not disassemble the internal structure purposely to prevent damaging the internal circuits of Poputar.
Specifications
Warranty Statement
Note: This warranty statement is only for Poputar smart guitars
(hereinafter called Poputar) sold in Mainland China (excluding Hong Kong,
Macau and Taiwan).
For Poputar encountering performance faults within 7 days from the date of
purchase, you can choose a one-time refund of the invoice amount, change it to
Poputar of the same model with the same specifications or repair the item;
Customer service Email : support@poputar.com
For Poputar sold in US and Canada, please refer to the additional warranty
card: “90 Days Limited Warranty”
For Poputar sold in other countries, please refer to the additional warranty
card.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.