DRAGON BREATH EA-050226 RGB Gaming mouse User Manual

DRAGON BREATH EA-050226 RGB Gaming mouse

Product Information:

The RGB Gaming Mouse is designed in Poland and manufactured in China by mPTech Sp. z o.o. The mouse operates on a wired or 2.4 GHz wireless connection with a range of up to 8m. It is compatible with Windows XP, Vista, 2000, 7, 8, and 10 operating systems and has a built-in rechargeable Li-ion battery with a capacity of 450 mAh. The mouse has an optical sensor with a sensitivity of 400 / 800 / 1600 / 2400 / 4800 DPI and comes with 7 buttons, including a scroll wheel.

Product Usage Instructions:

1. Ensure that the device is properly connected to the computer or laptop with the USB-C port.
2. Check if the operating system recognizes the device and installs the drivers.
3. Use the left and right buttons of the mouse for basic functions like clicking, double-clicking, and right-clicking.
4. Use the scroll wheel to move up and down on the web pages and documents.
5. Press the DPI button to switch between different sensitivity levels of the optical sensor.
6. Press the button to change the backlight color of the mouse.
7. Press the forward and backward buttons to navigate between web pages or documents.
8. Avoid looking directly at the light of the mouse’s diode to protect your eyes from damage.

Note: Only a qualified service center or authorized service point can repair this product. Repairs made by unqualified service or unauthorized service points or self-modifications can cause damage to the device and void the warranty.

Customer service:
mPTech Sp. z o.o.
street Krakowska 119
50-428 Wrocław
Poland
Helpline: (+48 71) 71 77 400
E-mail: pomoc@mptech.eu
Designed in UE

Manufacturer
mPTech Sp. z o.o.
street Nowogrodzka 31
00-511 Warsaw
Poland
Website: mptech.eu
Made in China

SAFETY

Read these guidelines carefully. Not following them may be dangerous or illegal. The manufacturer is not responsible for any consequences caused by improper usage of the phone and not obeying the below instructions.

DO NOT RISK
Do not switch on the device when the use of mobile phones is prohibited or if it might cause interference or danger. Always abide by any kinds of prohibitions, regulations and warnings conveyed by the staff of the entity where you wish to use the device.

2.4 GHz CONNECTIVITY

The device emits electromagnetic energy at a radio frequency that is lower than that of other devices, such as i.e. mobile phones. The product meets the requirements of safety standards and radio frequency recommendations. All wireless devices may cause interference to other devices. The maximum radio frequency power emitted in the frequency range 2402-2480 MHz equals -10.587 dBm EIRP (mouse) / -0.615 dBm EIRP (receiver).

QUALIFIED SERVICE

This product may only be repaired by qualified service personnel of the manufacturer or by an authorized service centre. Repairing by an unauthorized or unqualified service and make modifications yourself may cause device damage and warranty loss.

CHILDREN AND PHYSICALLY OR MENTALLY DISABLED PEOPLE
This device is not a toy. Keep the device, its accessories and packaging out of reach of children. Cables and plastic wrappings may wrap around the child’s neck or may be swallowed, resulting in suffocation or choking. This device should not be operated by people (including children) with limited physical or mental abilities, as well as by people with no earlier experience in operation of electronic equipment They may use the device only under supervision of people responsible for their safety.

SURROUNDINGS
The cable shall be so placed and secured that it cannot be trampled, damaged or pulled back from its position. The device should not operate in heavy dust – this may cause the particles to settle on the components, which may lead to product damage. Avoid operating the device in a high humidity environment and do not expose it to direct contact with water or other liquids, as this may lead to product damage. Avoid using the unit in direct sunlight and near heat sources (radiators, cookers, fans, etc.), as they may damage the housing and electronics. Avoid operating the devices near devices that generate magnetic field.

BATTERY

Avoid exposing the battery to very high/low temperatures. Extreme temperatures may influence capacity and battery life. Avoid contact with liquids and metal objects as it may cause partial or complete battery damage. The battery should be used according to its purpose. Do not destroy, impair or throw the battery into flames – it might be dangerous and may cause fire. Worn-out or impaired battery should be placed in a dedicated container. Excessive charging the battery can cause damage. Therefore a single battery charge should not last longer than it is required for its full charge. The battery in the device is not user-replaceable. Do not dismount or modify the battery. Do not short- circuit the battery terminals!
Keep small cells and batteries out of the reach of children. Swallowing them can lead to burns, perforation of soft tissues and death. Severe burns may occur within 2 hours of ingestion. In the event of ingestion, seek medical advice immediately.

EYE-SIGHT PROTECTION

• It is forbidden to look directly into the light of the mouse diode. It is harmful to the eyes and can result in permanent damage to vision.

Technical specification

Technical data

RGB Gaming mouse

Model| EA-050226
Lot number| 612736
Connectivity| Wired or 2.4 GHz radio (up to 8 m)
Mouse profile| For the right-handed
Number of buttons| 7 (including scroll button)
Life cycle of the buttons| 10 million presses
---|---
Sensor| Optical
Resolution| 400 / 800 / 1600 / 2400 / 4800 DPI
Compatibility| Windows XP, Vista, 2000, 7, 8, 10
Interface| USB, Power supply 5 V ⎓ 1 A (charging)
A built-in battery| Li-ion 3,7 V ⎓ 450 mAh, 1,665 Wh

Package content

• RGB Gaming mouse
• User manual
• If any of the above items is missing or damaged, please contact your dealer.

We advise to keep the container in case of any complaints.

• You can obtain a free printed version of the manual from the web address below:

https://mptech.eu/qr/dragon-breath Or by scanning the QR code placed below:

Overview of the device

Mouse operation

 Charging the battery

• Before switching on the device for the first time, charge the built-in rechargeable battery using the USB cable provided. In case of any problems with the battery or if in need of a replacement, the device should be delivered to the manufacturer’s service center. Use only the cable included in the set. Using incompatible cables can cause explosion of the battery or damage to your device. Incorrect connection of USB cable can cause damage to the device or the power source. No damages resulting from improper handling are not covered by the warranty. We recommend to shut down the device for charging.
• The device can heat up during charging. It is a regular occurrence and should not affect the stability or performance of the device. Do not leave the charging device unattended as this may result in fire, damage to equipment or surroundings.
• If the device does not charge properly, bring it and its accessories to the manufacturer’s service centre.

To charge your device, connect the USB-C plug of the included cable to the USB-C connector on the front of the device, and connect the other end of the cable to the connector on your computer, laptop, power bank, USB charger, etc., which guarantee 5V ⎓ 1 A or higher current on the output. Charging will be indicated by the red light inside the device. When charging is complete, the light turns off, then disconnect the power cord from the device and the power source. It is possible to use the device during charging, but this may increase the charging time of the built-in battery.

 Connection of the mouse

• Use only one type of communication with your computer when using the device.

The device is capable of both wired and wireless operation. Connect the included USB-C cable to the USB-C connector on the front of the device, and connect the other plug of the cable to your computer. For a wireless connection, use the transmitter on the underside of the unit – remove it and plug it into a USB port on your computer. Whichever type of connection you choose, turn on the mouse by setting the switch on the bottom of the device to the ON or position. The operating system will automatically search for device drivers and install them. Drivers searching may take a while. Setting the switch to ON turns the device on without RGB backlighting, while setting it to turns the mouse on with backlighting.

• Do not connect the device and its accessories with visible mechanical damage or if you notice the device is over.
• Do not connect the device “by force”, as this may damage the device or the USB port of your computer. In case the USB plug of the device does not fit into the computer port, reverse the plug by 180 degrees.

Adjusting the mouse resolution

Mouse resolution is expressed in DPI (Dots Per Inch) units. Resolution adjustment is via the DPI change button. The adjustment is six-step in the range of 400-800-1600-2400-3200-4800 DPI. The higher the resolution, the more sensitive the mouse is to movement. Each time you press the DPI change button, the resolution of the mouse increases. When the highest resolution is reached, the adjustment starts again (from the lowest value). Press the DPI change button while moving the mouse to check the sensitivity and if you are not happy with the level, select another.

Switching the mouse backlight on and off

• The RGB backlight on the device only works if it has been enabled by setting the switch on the bottom of the device to the RGB position.

The device offers ten different multi-colour backlight modes. Press the change button to switch from one backlight mode to the next. After switching all backlight modes, the backlight will turn off. The mouse will not remember the last used backlight mode if you unplug it or switch off the computer to which it is connected.

 Troubleshooting

If you have any problems with your device, please refer to the following tips.

The cursor cannot be moved around the screen.| Check that the mouse cable is correctly connected to the computer or laptop. Check that the operating system has recognized the device and installed the drivers. Check that the USB port on the computer or laptop is not damaged. Check that the mouse cable is not damaged.
---|---
Cursor moves too fast / too slow| Check the mouse resolution settings – the size of the mouse and how you can toggle them with the buttons.
The roller does not work.| Check that the operating system has recognized the device and installed the drivers.
I cannot connect the plug to the socket.| Check that you are not connecting the plug in reverse. Check that you are reversing the plug 180 degrees to connect it – do not force the plug in.
The backlight does not work| Check that the switch on the bottom of the unit is set to the RGB position. Check that the backlight has been switched on using the backlight change button.
If the problem persists, contact service centre.

Maintenance of the device

To prolong the lifespan of the device:

•  Keep appliances and their accessories out of the reach of children and pets.
• Avoid contact with liquids; it can cause damage to electronic components of the device.
•  Avoid very high temperatures, it can shorten the life of electronic components, melt the plastic parts and destroy the battery.
•  Do not try to disassemble the device. Tampering with the device in an unprofessional manner may cause serious damage to the device or destroy it completely.
•  To clean the device use only a dry, soft cloth. Never use any agent with a high concentration of acids or alkalis.

Explanations of the symbols

• The packaging of the device can be recycled in accordance with local regulations.
• Symbol for cardboard.
• Dispose of waste in the appropriate containers.
• Marking of the container into which the packaging – paper – should be disposed.
• The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2012/19/EU on used electrical and electronic Equipment (Waste Electrical and Electronic equipment – WEEE). Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use. The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling point in which dangerous waste are being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources. Proper disposal of used electrical and electronic equipment is beneficial to human health and environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or point of sale, where the equipment was purchased.
• According to the EU directive 2006/66/EC with changes contained in EU directive 2013/56/UE on the disposal of batteries, this product is marked with crossed-out garbage bin symbol. The symbol indicates that the batteries used in this product should not be disposed with regular household waste, but treated according to the legal directives and local regulations. It is not allowed to dispose of accumulators with unsorted municipal waste. Users of battery and accumulators must use the available collection points of these items, which allows them to return, recycle and disposal. Within the EU, the collection and recycling of batteries and accumulators is a subject to separate procedures. To learn more about existing procedures of recycling of batteries and accumulators please contact your local office or an institution for waste disposal or landfill.

The use of the manual

Without prior written consent of the manufacturer, no part of this manual may be photocopied, reproduced, translated or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in any systems of storing and sharing information. All brand names and product names are trademarks or registered trademarks of their respective companies.

Warranty

The product is covered by a 2 year warranty from the date of sale of the product. If you need warranty repair, please contact the manufacturer’s hotline or the point of sale. The product returned for warranty claim should be complete and packed in its original packaging.

Declaration of conformity with European Union Directives

• mPTech Sp. z o.o. hereby declares that the type of radio device RGB gamin mouse, model EA-050226 is compliant with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following Internet address:
https://mptech.eu/qr/dragon-breath

References

• mPTech Sp. z o.o.
• DRAGON BREATH | Instrukcje obsługi i Deklaracje UE / User manual and EU Declaration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>