Schuller 276092 LED Dimmable Lamp Instruction Manual

276092 LED Dimmable Lamp

Product Information

Specifications

• Model: 276092
• Weight: 12kgs
• Dimming: 0-10V and TRIAC dimming
• Includes: LED lights, dimming kit (Ref. 600811)

Product Usage Instructions

1. Remove the plastic piece and move the connection to the inside
   of the canopy.

2. Finish threading carefully to avoid scratching.

3. Assemble the lamp with the help of two people due to its
   weight.

4. Ensure proper fixation of the lamp as it is a heavy item
   (12kgs).

5. Use the included special screws for installation.

6. If using a wall dimmer, ensure it is compatible with 0-10V and
   TRIAC dimming. Use only this type of dimmers.

7. Utilize the provided dimming kit (Ref. 600811) which includes a
   wireless switch and dimmable receiver.

FAQ

Q: Can I install the lamp by myself?

A: It is recommended to assemble the lamp with the help of two
people due to its weight (12kgs).

Q: How do I dim the lights?

A: This product includes LEDS with 0-10V and TRIAC dimming. Use
the provided dimming kit (Ref. 600811) with a compatible wall
dimmer for dimming functionality.

Q: Where can I find the complete technical data sheet?

A: You may use the QR code provided with the product to view the
complete technical data sheet. For any technical questions, contact
our technical department at export@schuller.es.

INSTRUCCIONES DE MONTAJE ARTÍCULO 276092
ATENCIÓN: Schuller recomienda que utilice los balancines suministrados en la instalación de esta lámpara.

1 2
3

6 2

Introducir la pieza de plástico y la conexión al interior del plafón

7

4
Terminar de roscar con precaución de no rayar

NOTA IMPORTANTE

El montaje y la manipulación

5

de este artículo debe hacerse entre dos personas.

ATENCIÓN Articulo muy pesado (12Kg). Realizar un anclaje seguro.
ATENCIÓN Este producto incluye leds con dimado de 0-10V y TRIAC. Para utilizar con regulador de pared, usar sólo dimmers de estos dos tipos de regulación.
Este producto incluye kit de dimado (Ref. 600811): interruptor inalámbrico y receptor dimable.
Para ver la ficha técnica de producto completa, puede usar el siguiente código QR:

Para cualquier duda técnica póngase en contacto con nuestro Departamento Técnico. Estamos a su servicio en nuestro email mperez@schuller.es o en nuestro teléfono 961 601 051

Rev.05.24

INSTRUCCIONES DE MONTAJE ARTÍCULO 276092
5
Vista desde abajo del florón

ASSEMBLING INSTRUCTIONS ITEM 276092
ATTENTION: Schuller recommends to use included special screws when installing this lamp.

1 2
3

6 2
7

Remove plastic piece and move the connection to the inside of the canopy,

4
Finish threading pay attention to not scratch it

IMPORTANT NOTE

The assembly of this lamp

5

must be done by two people

WARNING Very heavy item (12kgs). Make sure it is properly fixed

ATTENTION This product includes LEDS with 0-10V and TRIAC diming. To use it with wall dimmer, use just this type of dimmers.
This product includes dimming kit (Ref. 600811): wireless switch and dimmable receiver.
You may use the following QR code to view the complete technical data sheet of the product:

If you have any technical questions, please do not hesitate to contact our technical Department. We are at your disposal in our email: export@schuller.es

Rev.05.24

ASSEMBLING INSTRUCTIONS ITEM 276092
5
View from below the canopy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>