Schuller 451052D 5 Light Pendant Lamp Instruction Manual
- May 15, 2024
- Schuller
Table of Contents
**Schuller 451052D 5 Light Pendant Lamp Instruction Manual
**
product instruction
ATTENTION : Schuller recommends to use included special screws when installing this pendant lamp.
Please adjust the length of the cables before fixing the canopy to the ceiling.
If the cable is twisted, please hold the bottom of the cable, and use a screwdriver or a metal rod to stroke the cable up and down to keep it straight.
MPORTANT NOTES To avoid damaging the wire cable with the set screw, just adjust the length of the cable for its final position.
In case you need to shorten the wires, keep the set of 3 capacitors in the original position.
ATTENTION
This product includes LED drivers with 0-10V or PWM diming, a receiver and a remote control by radiofrequency. To use it with wall dimmer, use just this type of dimmers. Any other type would damage the LED driver. The receiver installed in the product has channel 1 selected. Use this channel also on the remote control.
You may use the following QR code to view the complete technical data sheet of
the product:
If you have any technical questions, please do not hesitate to contact our
technical Department. We are at your disposal in our email:
irodriguez@schuller.es
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>