Schuller 793960K Lighting Large lamps Sphere Instruction Manual
- June 3, 2024
- Schuller
Table of Contents
Schuller 793960K Lighting Large lamps Sphere
ATTENTION: Schuller recommends to use included special screws when
installing this lamp.
WARNING
Very heavy item (24kgs). Make sure it is properly fixed
IMPORTANT NOTE
The assembly of this lamp must be done by two people
You may use the following QR code to view the complete technical data sheet of the product
If you have any technical questions, please do not hesitate to contact our
technical Department.
We are at your disposal in our email:
[email protected]
ASSEMBLING INSTRUCTIONS
ITEM: 793960K
BLUETOOTH DIMMABLE ITEM
IMPORTANT NOTICE:
If the cable is twisted, please hold the bottom of the cable, and use a
screwdriver or a metal rod to stroke the cable up and down to keep it
straight.
First steps with the “Smart Life” App
This product includes led drivers with Bluetooth wireless dimming functions, to be controlled by an app in your mobile phone or tablet. Search for Smart Life app in your device o use the following QR code
-
Create new account or Sign in (When creating new account, the message with the verification code may delay some minutes).
-
Tap on Set up new device.
-
Select Lighting devices.
-
Choose the type of lighting device (BLE type)
-
To enter Set up mode, switch the luminaire on and off as follows:
SWITCH OFF and wait for 10 seconds
SWITCH ON – OFF – ON – OFF – ON (around 1 second of time per switch)
The luminaire will flash to indicate is in Set up mode. -
If correct, check Verify light flashed, and tap Next.
-
The device will appear in message, tap on the + icon to add it (the luminaire will flash when it has been sucessfully added),
-
From the main menu, tap on the device and you can dim it now. You may edit the name of each device, create a group of luminaires or authorize another user to dim the product.