WMF 04_1649_0011 Kitche Nminis Blender Instruction Manual

**WMF 04_1649_0011 Kitche Nminis Blender Instruction Manual

**

OVERVIEW OF COMPONENTS

1. Cap
2. Lid
3. Glass jar with base
4. Sealing ring
5. Blade assembly
6. Locking screw
7. Drive unit
8. Selector switch

Important safety information

• Appliances may be used by persons with limited physical, sensory or mental capabilities and persons lacking experience and/or knowledge if they are supervised or have received instruction regarding safe use of the appliance and if they have understood the resulting hazards.

• This appliance must not be used by children. The appliance and its connecting cable must be kept out of the reach of children.

• Children should be supervised in order to ensure that they do not play with the device.

• Cleaning and user maintenance shall not be made by children, unless they are older than 8 years old and supervised.

• The appliance must always be disconnected from the mains by means of pulling out the mains plug when there is no supervision present, if a fault occurs during operation and prior to any assembly, disassembly or cleaning work.

• If the appliance’s supply cable is damaged, it must be replaced by the manufacturer, his customer service representative or a similarly qualified person to avoid hazards.

• Exercise caution when handling the sharp cutting blades, emptying the jug and performing cleaning work.

• After using the appliance and accessories, clean all surfaces/parts that have come into contact with food. Follow the instructions in the “Cleaning and care” section.

• Exercise caution when pouring hot liquids into a compact kitchen appliance or blender. The liquid could be expelled from the appliance again in the form of sudden flash steam.

• This appliance is intended for use in household environments and for similar applications, such as:

  • in kitchens – for employees in shops, offices and other commercial areas;
  • on agricultural property;
  • by customers in hotels, motels and other residential facilities;
  • in bed-and-breakfast establishments;
    The appliance is not intended for purely commercial use.

• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

• WARNING — Always operate the blender with the lid or the guard in position as indicated in the instructions. Never put a hand in the jar when it is placed on the base unit.
  If food needs to be pushed down, use a suitable tool e.g. spatula.

• Always use the appliance in accordance with these instructions.
  Improper use can result in electric shocks and other hazards.

• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Before use
The blender may only be used for its intended purpose according to this operating manual, so read it carefully before performing any start-up work. It contains instructions for using, cleaning and caring for the appliance. We accept no liability for any damages caused if this manual is not observed.
Keep the operating manual in a safe place and pass it on to any subsequent user together with the appliance. Please also note the warranty information at the end. The appliance is not intended for commercial use, but only for the preparation of household quantities of food.
Observe the safety information during use.

Additional safety information

• Only connect the appliance to earthed wall sockets that have been installed pursuant to regulations. The supply cable and plug must be dry.

• Do not pull or clamp the connecting cable over sharp edges. Do not leave it dangling and protect it from heat and oil.

• Do not place the appliance on hot surfaces, such as on hotplates or similar areas, and do not operate near naked flames.

• Never pull the mains plug out of the socket by the supply cable or with wet hands.

• Do not switch on the appliance when the glass jug is empty.

• Always operate the appliance with the lid closed. Always wait for the blades to come to a standstill before removing the lid and/or the glass jug.

• Never handle objects in the glass jug while the appliance is running.

• Do not reach into the jug before the mains plug has been unplugged.

• Always move the selector switch into the Off position before removing the glass jug.

• Attention! There is a risk of scalding when processing hot food. In extreme cases, the glass jug could be damaged. Only food with a maximum temperature of 60°C may be processed. In this case, do not fill the jug more than halfway and firmly press the lid onto the jug by hand during operation.

• The appliance must be switched off and disconnected from the mains before accessories or additional parts that move during operation are replaced.

• Stop using the appliance and/or pull out the mains plug immediately if:

  • the appliance or mains cable is damaged.
  • you suspect that there is a defect after the appliance has fallen or suffered a similar incident.
    In cases such as these, send the appliance to be repaired.

• Do not immerse the drive unit in water.

• We accept no liability for any damages caused in cases of misuse, incorrect operation or improper repairs. Claims under warranty are likewise excluded in such cases.

Use
The WMF KITCHENminis table blender is a space-saving and energy-efficient kitchen appliance.
You can use the appliance to prepare smoothies, shakes, soups, etc. Thanks to the appliance’s compact design and powerful motor, you can also process only small quantities. Easy and intuitive operation and the high-quality workmanship / materials guarantee convenient preparation.

| 38% Space savings
---|---
49% Resource savings
42% Energy savings”
100% Performance

• Compared to WMF Lineo table blender.
  Confirmed by technician use. de. Resource savings refer to material usage and transportation volume.
  Energy savings refer to the maximum power consumption at maximum filling capacity.

Start-up

• Clean the glass jug (3), lid (2) and closing cap (1) before starting up the appliance for the first time.
  Ensure that you do not injure yourself on the sharp blade.

• Place the appliance on an even surface and position the glass jug (3) on the drive unit (8).

• Add the ingredients to the jug (3) and close it with the lid (2) and the closing cap (1).
  Additional ingredients may be added by removing the closing cap (1), even while the motor is running.
  Note: Ensure that you do not exceed the maximum filling quantity of 0.8 l. If you are using hot, very liquid or slightly foaming food (e.g. milk), we advise using 0.5 l as the maximum filling quantity.
  Note: Never operate the appliance empty.

• Start the appliance by turning the selector switch (8) to the right. Start at a low speed and increase
  it if necessary.
  To use the Pulse function, hold the selector switch (8) to the left on the Pulse level. The motor will operate at maximum speed for as long as you keep the selector switch (8) on the Pulse level.

• As soon as the desired result has been achieved, switch the selector switch (8) to the Off position  Only then should you remove the jug (3).
  Attention! Risk of injury! Always wait for the blade to come to a standstill before removing the lid (2). Do not reach into the appliance before the mains plug has been unplugged.
  Completely empty the glass jug (3) following use. Do not leave any liquid in the jug (3).

• In case of overheating of the motor during use, the device will stop automatically for self-protection. Unplug the power cord from the wall outlet and allow the unit some time to cool down. Then, plug the power plug back in and start the mixing process again.

Examples| Speed| Maximum time| Maximum filling quantity
---|---|---|---
Instant drinks, cocktails| Low (min.)| 40–60 s| 500 ml
Soft fruits (e.g. bananas, apricots)| Low (min.)| 40–60 s| 250 g
Milkshakes / smoothies with soft fruits| Low (min.)| 1–2 mins.| 250 g of fruit

• 150 ml of milk / juice
  Soups, sauces| Medium| 1.5–2 mins.| 500 ml
  Milkshakes / smoothies with harder fruits| Medium| 1.5–2 mins.| 250 g of fruit
• 150 ml of milk / juice
  Vegetables| Medium| 1.5–2 mins.| 250 g
  Frappés| Medium| 1.5–2 mins.| 250 ml of coffee + 4 ice cubes
  Milkshakes / smoothies with frozen fruits, green smoothies| High (max.)| 40–60 s| 250 g of fruit + 150 ml of milk / juice

Crushing ice cubes
Fill the glass jug (3) no more than halfway with ice cubes and close it with the lid (2) and cap (1).
Move the selector switch (8) to the Pulse level for a few seconds and then back to the Off position .
As soon as the ice cubes have fallen back to the bottom of the glass jug (3), you can switch to the Pulse level again for a few seconds. Repeat the process until the crushed ice has the desired consistency.

Glass jug

Lid with closing cap
The closing cap (1) in the lid (2) can be removed and used as a measure (10 / 20 / 30 ml) by turning it anti-clockwise.
The lid (2) reliably and tightly seals the glass jug. The lid (2) has a tab which you can use to make it easier to remove the lid.
You can add more ingredients through the opening, even during operation.

Disassembling the glass jug
The glass jug (3) can be disassembled, especially for cleaning.
Remove the lid (2) and the closing cap (1). Place the glass jug (3) on the table with the opening facedown and turn the locking screw (6) on the blade unit (5) clockwise. You can now remove the blade unit (5) and the sealing ring (4).
To assemble the glass jug, the sealing ring (4) is first of all attached to the blade unit (5). When doing so, ensure that the sealing ring (4) is correctly positioned on the blade unit (5). Then insert the blade unit (5) into the glass jug. (3) and firmly turn the locking screw (6) anti-clockwise.
Note: To ensure the tightness of the glass jug (3), the blade unit (5) must be screwed on tightly. The blade unit (5) is easier to tighten if you apply a few drops of cooking oil on the sealing side of the glass jug.

Cleaning and maintenance
Remove the mains plug after use. Under no circumstances should you immerse the drive unit (8) in water. Simply wipe the outside with a damp cloth. Do not use any abrasive cleaning agents. Ensure that you do not injure yourself on the sharp blade when cleaning the glass jug (3). Immediately after blending, fill the jug with warm rinsing water and allow the motor to run for a few seconds. Then remove the glass jug (3) and clean with a washing-up brush. For thorough cleaning, you can disassemble the glass jug as described in the section entitled “Disassembling the glass jug”.
For quick and easy cleaning, you can place all loose parts in the dishwasher.

|
Dishwasher safe|
Can be rinsed under running water|
Wipe with a damp cloth
---|---|---|---
Closing cap (1)| | |
Lid (2)| | |
Glass jug with base (3)| | |
Sealing ring (4)| | |
Blade unit (5)| | |
Locking screw (6)| | |
Drive unit (7)| | |

For UK use only

• This product is supplied with a 13 A plug conforming to BS 1363 fitted to the mains lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the plug is a non-rewireable one, cut it from the mains lead and immediately dispose of it. Never insert it into a socket outlet as there is a very great risk of an electric shock.
• The replacement of the plug at the mains lead has to be done according to the following instructions:

Important: The wires in this mains lead are coloured in accordance with the following code:

blue : Neutral
brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

• the wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black,

  • the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
  • Do not connect any wire to the terminal which is marked with the letter E or by the earth symbol , or coloured green or green and yellow.

• If a 13 A (BS 1363) plug is used it must be fitted with a 3 A fuse conforming to BS 1362 and be ASTA approved. If any other type of plug is used, the appliance must be protected by a 5 A fuse either in the plug or adapter or at the distribution board.
  If in doubt – consult a qualified electrician.

• Never use the plug without closing the fuse cover.

Technical data

Rated voltage: 220–240 V~ 50-60 Hz
Power consumption: 340–400 W
Protection class: II

Technical information on the operating modes pursuant to EU Regulation 2023/826:

The appliance complies with European directives 2014/35/EU, 2014/30/EU and 2009/125/ EU

Environment

Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

These instructions are also available on our website: wmf.com
WMF Business Unit Consumer GmbH
WMF Platz 1
73312 Geislingen/ Steige
Germany
+49 (0)7331 256 256
contact@wmf.com
wmf.com
CMMF : 3200000029 | Model 04 1649 0011
CMMF : 3200002582 | Model 04 1649 0071
3200002579/01

References

• Technik zu Hause: Technik zu Hause
• WMF Onlineshop | Tradition und Qualität seit 170 Jahren

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>