SMARTGLO SL200 Smart LED Lights User Manual

SL200 Smart LED Lights

Specifications:

• SL200-SL: 200 LED String Lights
• SL400-SL: 400 LED String Lights
• SL200-ICL: 200 LED Icicle Lights
• SL210-CUR: 210 LED Curtain Lights
• SL10-FST: 10 BULB LED Festoon Lights

Product Usage Instructions:

Usage:

Ensure safety by checking for cut, damaged, or frayed wiring,
cracks in lamp holders. Keep away from children under 3 years due
to choking hazards.

Safety Information:

Avoid placing the lights near flammable materials, doors,
windows, or moving objects. Follow safety guidelines to prevent
accidents.

Downloading and Pairing with onesmart Home App:

1. Download the onesmart Home App from your app store.
2. Open the app and create an account.
3. Pair the light set with the app by following the on-screen
   instructions.

Operating Your Device from the App:

Use the app to control various settings such as power on/off,
color selection, brightness, music sync, and scheduling.

Control with Google Assistant:

1. Login to the Google Home App and follow the steps to link your
   device.

2. Select the device you want to control and assign it to a
   room.

Control with Amazon Alexa:

1. Login to your Alexa App and enable the one smart home
   skill.

2. Select the device you want to control and assign it to a
   room.

Care and Cleaning:

To clean, wipe the exterior of the lights with a damp cloth. Do
not immerse in water.

Proof of Purchase:

Retain your purchase receipt for all warranty claims.

Warranty:

Refer to the warranty documentation provided for details on
coverage.

FAQs:

Q: How do I reset my smart LED lights?

A: To reset your smart LED lights, turn them
off and on three times in quick succession. This will reset the
connection and settings.

SMART LED LIGHTS

MODELS:
SL200-SL SL400-SL SL200-ICL SL210-CUR SL10-FST –

200 LED String Lights 400 LED String Lights 200 LED Icicle Lights 210 LED Curtain Lights 10 BULB LED Festoon Lights

Instructions for the use of these lights – IMPORTANT PLEASE READ

USAGE
· This light set is suitable for indoor and covered outdoor use. However, please ensure the transformer is plugged into the indoor mains supply only or weatherproof outdoor socket.

SAFETY INFORMATION
· Remove light set from packaging before connecting to power supply. · Do not attempt to modify the transformer, wiring or controller in any way. · Ensure that all of the cable is uncoiled whilst set is in use. Failure to do so may
cause over-heating and subsequent malfunction. · Avoid damage to wire insulation (cable), as this could cause a short circuit and
damage the transformer and/or controller. · Disconnect from mains supply when not in use. · Before using or reusing the set, inspect it carefully for damage. Do not use any light
set which has cut, damaged or frayed wiring, cracks in any of the lamp holders,
loose connections or exposed wires. · Should the light set, transformer or controller become damaged, do not attempt to
repair them; consult an authorized electrician. · We do not consider the light set suitable for use in locations where unsupervised
children under the age of 3 years are present, as there may be a risk of choking on
small parts or entanglement. · Ensure the light set is not positioned where they can be inadvertently damaged by
doors or windows, moving objects, people or animals.

DOWNLOAD ONESMART HOME APP
· Open the APP Store or Google Play on your mobile phone. · Open ‘Search’ and enter `onesmart home’. · Click ‘GET’ and begin to download and install.

Open the app when this has downloaded.

Pairing the Light set to onesmart Home App

CREATE AN ACCOUNT
· Tap REGISTER near the bottom of the screen. · Read and agree to the Privacy Policy. · Add your email address. · Tap ‘Obtain verification code’. Enter the verification code from your email. · Create a password. Note: Please keep your account and password in mind for Alexa
or Google Assistant App pairing. · Tap confirm. · Your APP is now registered and ready for pairing to your device.

PAIRING THE LIGHT TO THE ONESMART HOME APP
· Before starting pairing to your phone, make sure you have Bluetooth and Wi- Fi turned on and you have your Wi-Fi password ready.
· Plug light set into socket. Lights will be red. · Press the button on the adaptor for +-10 seconds. When the button is released, it
will flash green and light set will also turn green.

Add the light to onesmart home app
1. In the onesmart home app go to the +’ button at the top right corner and selectAdd device’. Choose your Wi-Fi network and enter your password.
2. Once device is discovered click add. This might take some time to download. 3. Once downloaded you can edit the device name using the pencil icon. Click done
when finished. This will then open your device controller.

Operating your Device from the APP
Device main operation screen
Device settings See next page Scheduling
Favourite
Current Colour selection

Power On/Off

Modes Colour Stored and Favourites
Brightness

Music Sync

Device Settings

View compatible Voice Control devices & instructions on setting up.
Share device with family (see instructions on next page)
Read FAQs & submit feedback
Review device network
Remove device from app

Change the name, location & image of your device View your device information View your tap-to-run and Automation
Turn on notifications for when device goes Offline.
Create group of devices (see instructions on next page)
Add device shortcut to home screen
View device updates & turn on automatic updates

Grouping Light
HOW TO GROUP THE LIGHTS · Make sure all the lights have been paired to the onesmart home app. · Choose any light on the app, click the edit button on the top right corner, then click Create Group. · Choose the lights you want to group from the device list.
· When all items have been selected click Save. · Rename the group for example Lounge Lights and click Save. · This group can now be controlled together.

Scheduling
HOW TO SET SCHEDULES · Select the Clock Icon on the main control screen. · Click Add to add a new Schedule. · Select the time you would like the light to go on and select ON in the ON/OFF area. · Select the Repeat button if you would like this to repeat more than once and · Select the notification slider if you would like to receive a notification of the light turning on. Click Save
when done. Note: this is not available if you are scheduling a group of lights.
· Note: Once you have selected the days to be repeated click the back button to get out of this screen. · Repeat the previous instruction to select the time you would like the light set to go off . Note if you
don’t add this step, you will have to manually turn the light off. · Select the slider to easily turn on and off any schedules. To delete a schedule, hold down your finger
on the schedule until the delete button pops up.

Controls
SELECTING DIFFERENT MODES · Select the Power Icon to turn the light On and Off. · To access different light modes and colours select the icon. · To select a static colour select the icon. You can also control the brightness in this screen.
· Select the heart in the top right corner to select the current setting as a favourite. To access all your favourite setting select the icon.
· To sync your light to music or voice, select the icon. · Using Local mode you can select from a range of different effects. The adaptor of the light set will pick
up sounds in the room including music and voices. · Use the App mode to pick up music from your phone.

Control with Google Assistant
HOW TO CONTROL WITH GOOGLE ASSISTANT · First you will need to add the one smart home’ app to yourGoogle Home’
account.
1. Login to the Google Home App, click on Devices at the bottom of the screen and then on + Add Device’ or+ Add’.
1. Select Works with Google Home’ 2\. In the search bar typeone smart home’ and select.
4. You will then need to link your google account to one smart home.
5. Select the device you want to link. (You can add multiple devices here).
6. Then select the room where this device will be located.
· Exit out of Google home.
· You can now control the light on Google Assistant App by using the below voice commands: “OK Google, turn on the .” “OK Google, turn off the .” “OK Google, set the mode to colour/white/scene/music.” “OK Google, set the brightness to (10%, 25%, 50%, 75% and 100%). ” “OK Google, set the colour to (Red, orange, yellow, green, blue, purple or pink). ” “OK Google, turn off the