ZABBOW SL001A Scorpion Bluetooth Headset Instruction Manual

ZABBOW SL001A Scorpion Bluetooth Headset

Operating instruction

for F-SL001/002/041 series

Product name: Scorpion bluetooth headset
Model: F-SL001A

Diagram of Earphone

• Multi-function button
• Volume-/Previous Song
• Volume+/Next Song
• Charging port
• Indicator light
• Microphone
• Hi-Fi receiver
• Ear hang

1. Remove the transparent cove
2. Remove the hang
3. Install the alternative hang
4. Fasten the transparent cover

Brief Introduction
Bluetooth headset: using 5.0 Bluetooth chip, super noise reduction function, To ensure high fidelity sound quality, stability and superior call effect.

Volume+/Volume- key introduction
Volume+: Music mode: short press to previous song, long press to increase volume
Call mode: Short press for volume increased, long press to mute (some versions maydifferent)
Volume+:  Music mode: short press to next song, long press to reduce volume
Call mode: short press for volume reduced, long press for volume reduced (someversions may different)

Multifunction button

1. Power on: Long press the power button for 3 seconds until the blue light flicker and loosen.
2. Power off: long press the power button for 3 seconds until the green light flicker and loosen.
3. When Bluetooth headset connected mobile phone, short press the power button toplay/pause music, short press the power button to answer the incoming call, long press thepower button for 2 seconds to reject the incoming call, short press the power button to hang upthe current call.
4. After Bluetooth headset connected mobile phone connection, double-click the power buttonto redial the last call.
5. When the Bluetooth headset not connected mobile phone, double click power buttontoswitch Chinese and English version.
6. When Bluetooth headset connected phone, short press the power button 3 times to open Siri/Google etc voice assistant.
7. Game mode, short press the power button to pause/reconnect
8. When Bluetooth headset has been connected to the mobile phone, long press the volume+/- or button to disconnect the current connection and clear all pairing information

Paired Phone

1. After power on Bluetooth headset, blue and green indicate light quickly flashing and enter pairing status
2. After pairing successful, the indicate light flashing blue once every 5 seconds. Some phoneneed pairing password “0000” After Bluetooth headset is paired with device once, it will be automatically paired with thedevive after starting up again (some old mobile phone need to be confirmed on the mobilephone). 3. Pairing time is 1 minute, and the pairing status will automatically exit after 3 minutes. Pleasecheck the Bluetooth operation method of the mobile phone and pairing again. 4. Bluetooth headset will disconnect with the Bluetooth device if beyond the receiving range, Bluetooth headset will automatically connect when it returns to the receiving range within15minutes, and will automatically shut down if it does not back to receiving range in 15 minutes. 5. The indicate light flash blue once every 2.5 seconds in connection status

Bluetooth headset charging

1. Bluetooth will shut down when charging
2. Indicate light flashing green
3. Indicate light flashing blue after fully charged.

Product parameters

• Bluetooth version: V5.0 (enhanced data rate) and compatible V2.1 V2.0 and V1.2 standards
• Support Bluetooth function: Headset Profile, Handfree Profile
• Applicable models: compatible with mainstream brands of bluetooth mobile phones, computers and game consoles and other bluetooth devices, coordinate bluetooth
• Wireless transmitter can be used for online voice chat, listen music, and interactive games receiving distance in10 meters
• 041 and above version support voice calls
• frequency: 2402 MHZ to 2480 MHZ ISM Band
• microphone sensitivity: – 45 db (0 db = 1 v/Pa, 1 kh2)
• talk time: above 15 hours
• standby time: 200 hours
• charging voltage: 5 v
• charging current: 95 ma
• harging time: less than 3 hours
• product weight: 14 g
• not suitable to use the charger more than 2A for charging
• environmental temperature: to ensure the storage capacity and life of battery, please try tokeep the battery temperature between 15 ℃ to 25 ℃
• standard accessory: USB charging line, user manual
• battery type: built-in rechargeable lithium batteries
• wear mode: ear hanging
• To guarantee the transportation safety of bluetooth headset, factory setting should keepthe battery capacity at about 30-60%
• please fully charged for the first time use, repeatedly more than three times can achieve thebest results

Due to continuous upgrade of product, if there is any discrepancy in some functions, Pleasesubject to the object and reserve the right without further notice

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>