klatre KL02 Smart Watches for Women User Manual

klatre KL02 Smart Watches for Women

USING INSTERUCTION

Charging

To charge the watch, place the watch flat and make sure that the two metal holes on the back are aligned with the metal tip of the charging head.

Poweron

Charge the smart.watch to activate it before first use. Long press for 3 seconds to power on.

APP

Search GloryFit APP in Google Play Store (Android) or App Store (iOS), or scan the QR code to download GloryFit APP.

Pairing

1. Click: in GloryRt APP to add the device, then scan the QR code on the watch screen.
2. 0r click select device• for pairing.

Home Button

• Power on: Press and hold till the screen lights up
• Power off: Press and hold and Choose Power Off. Back to Home Screen: Single Click

On Home Screen

1. Swipe down to enter the information list interface
2. Swipe up to enter the menu
3. Swipe left to enter the shortcut interface
4. Swipe right to enter the steps, sleep, heart rate, weather,music control

Change straps

Slide the spring pin and hold it to remove a strap from the watch or attach a strap to the watch.

Note: Please read the instructions before use:

1. The company reserves the right to modrfy the content of this notice without notice. According to normal circumstances. some functions are different in specific software versions.
2. The product should be charged for more than 2 hours before use, but avoid prolonged charging in an unmanned environment.
3. Please use a charger of SV/0.SA or 5V/1A along with the original charging cable from Klatre.
4. If you need to receive notifications from different apps on your watch, you need to manually turn on each App. The steps are as follows: Open the Gloryfit App > Click •Device• >Click• App/App reminders• > Choose the APP that needs to be reminded.

Warranty

Thank you for purchasing Klatre products. If any manufacturing defect problems occur within 12 months from the date of purchase, users can enjoy our company’s warranty service.

The limited warranty does not cover:

• Defects or damage resulting from accidents, neglect. misuse, or abnormal use; abnormal conditions or improper storage; exposure to liquid, moisture, dampness, sand, or dirt; unusual physic.al, electrical, or electromechanical stress.
• Scratches, dents, and cosmetic damage, unless caused by Klatre.
• Defects or damage resulting from excessive force or use of metallic objects on the touch screen.
• Ordinary wear and tear.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class 8 digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However; there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following t’NO conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A53V-KL02

Parameters

• Model: KL02
• Ingress protection level: SATM Input rating: SV= 0.SA
• Sensor: 3-axis acceleration sensor, HRM and SpO2 sensor
• Batte,y capacity : 260mAh
• Sync mode: Bluetooth BLE 5.0 “
• Resolution: 240*280 pixels
• Display : 1.69 inch IPS
• Operating frequency : 2400 – 2483.SMhz

Contents

• Klatre K Series x1 “
• Charging Cable x1
• User Manual x1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>